Brisk ZC/ZS Plug [BR12ZC]

  • Product number: BR12ZC
    • IN STOCK
    • Out Stock

Rp542,000

*VAT 11% included

Webike Points: +5,420 Points

Delivery information

  • Please wait...
to Jakarta, South Jakarta, Cilandak
CHANGE
Select address
Shipping Fee Rp10,000
Check my coupons

Quantity

100% Original 7 Days Warranty Free Cashback Net Price

Product Detail

Specification:

[Quantity] 1
[Size (NGK"D Plug"]
Screw Diameter 12mm
Reach 19mm
Plug Wrench Size 16mm
[Shape] Terminal Separation Type
[NGK Interchange] D8EA, D9EA, D10EA, DR8EA, DR9EA, DR10EA, DP8EA9, DP9EA9, DP10EA9, DPR8EA9, DPR9EA9, DPR10EA9, DPR9EIX9, DPR10EIX9, DCPR9E, DCPR10EIX

[Description]

With resistance (Resistor type)
Brisk ZC/ZS plugs have excellent ignition performance due to multi-sparking at multiple points.
As a result, the new plugs are highly effective in reducing the ignition rate throughout the entire range compared with existing plugs such as standard plugs and iridium plugs.
The effects such as the acceleration, the vibration reduction, and the flat torque characteristic will be felt as an amazing difference immediately after the plug is changed.
Because the remarkable effect is demonstrated even in the CDI ignition system that the LGS type does not conform, it becomes the one that can correspond to a wide variety of models.
In comparison with the LGS type, the LGS type has superior performance in the high-rpm power band, while the ZC/ZS type has an advantage in terms of flat response and vibration reduction in the low and mid-speed range.
Regarding the compatibility with ZC/ZS type 2-stroke engines, it is difficult in practical use for street use due to the problem of anti-covering at low rpm range.
On the other hand, in terms of performance, the engine characteristics are extremely flat and powerful throughout the entire range, making it an extremely effective tuning part for circuit use.
Although it doesn't demand ignition ability as much as LGS system, it shows more original performance if the Uotani SP-2 is installed.It is also the best match with V-UP16 / MSA.

NGK D plug size.
Compatibility with NGK plugs is as follows, heat value correspondence is from No. 8 to No. 10.
JR8B, JR9B, D8EA, D9EA, D10EA, DR8EA, DR9EA, DR10EA, DP8EA9, DP9EA9, DP10EA9, DPR8EA9, DPR9EA9, DPR10EA9, DPR9EIX9, DPR10EIX9, DCPR9E, DCPR10EIX

Note

* This item can not be cancelled, returned nor exchange after placing an order.
* The image is only for reference. The image shown may differ from the actual product.

Caution

*This product is a racing part.Even if there are indications of compatible models or plug compatibility, be sure to check for interference with the piston and use at your own risk.
*We are not responsible for any damage to the engine caused by defects in the product.
*Images are for reference only.The product is sold by the unit of one bottle.
*Ignition system tuned bikes - available.
*Ignition system stock bikes - available but limited types.
*Fully transistor ignition bikes - available.
*CDI ignition bikes - available.
*4-stroke bikes - available.
*2-stroke bikes - track use only.
*Resistor type (with resistor)
*Plug wrench size is 16mm which is used for C plug etc.
*The terminal is separable, so it is compatible with any plug cap shape.The terminal is only lightly screwed in at the time of shipment, so please check the tightness of the terminal when installing
*For other compatibility, refer to the NGK plug list below.All the mounting threads with a diameter of 12mm and a length of 19mm have compatibility.
*The tightening torque is 1.3kg-cm.Be careful of breakage due to overtorque.
*There may be changes in product specifications due to the manufacturer's reasons.

* Please note in advance that cancellation and/or return of this product cannot be accepted once the order has been placed.

ALSO VIEWED PRODUCTS

PRODUCT READY TO SHIP

Recommend for You

BEST SELLING

MOST VIEWED PRODUCTS

See all

New Custom Article

See all