Check my coupons
Quantity
100% Original
7 Days Warranty
Free Cashback
Net Price
Applicable Models
See All
Car models that can be fastened with M6-M12 bolts without any notches or protrusions on the bar ends.
Product Detail
Specification:
Collar hole diameter: M12
Sleeve included
Size: Φ22 (product outer diameter) x 3mm thickness
Quantity: 2
Sleeve included
Size: Φ22 (product outer diameter) x 3mm thickness
Quantity: 2
[Description]
[Feel the vibration-damping effect of titanium with you body]
Even after you get off the bike, you'll still feel the tingling in your hands, which can be quite painful after a long day of riding.
If such numbness can be reduced even a little.
Easy installation by simply inserting between the handlebar and bar end.
It is a small part, but it reduces the vibration transmitted to the handlebar by the resonance of the engine.
The hole diameter of the collar is M12, but if you fit the attached sleeve, it can be used for M6, M8 and M10.
(The sleeve is made narrower than the collar so that the collar itself touches it.)
[Compatibility]
Only when there is no notch or protrusion on the bar end and it can be fastened with M6 to M12 bolt.
*Not compatible with Panigale stock bar ends, but can be used with AELLA handlebar end sliders (part number AE-68302).
*Please refer to the compatibility diagram in the image for details.
Even after you get off the bike, you'll still feel the tingling in your hands, which can be quite painful after a long day of riding.
If such numbness can be reduced even a little.
Easy installation by simply inserting between the handlebar and bar end.
It is a small part, but it reduces the vibration transmitted to the handlebar by the resonance of the engine.
The hole diameter of the collar is M12, but if you fit the attached sleeve, it can be used for M6, M8 and M10.
(The sleeve is made narrower than the collar so that the collar itself touches it.)
[Compatibility]
Only when there is no notch or protrusion on the bar end and it can be fastened with M6 to M12 bolt.
*Not compatible with Panigale stock bar ends, but can be used with AELLA handlebar end sliders (part number AE-68302).
*Please refer to the compatibility diagram in the image for details.
Caution
*The range of reduction depends on the individual differences of the vehicle and the installed parts.
*As to AELLA bar ends, please use it by putting between the bar end and the brass weight.
*Depending on the vehicle and product, the length of the screw to hold the bar end may be insufficient for the thickness of the spacer.Please check before installation.
*This product may not be able to installed with aftermarket products.Please check the inside diameter and the shape of the end face of the handlebar before purchasing.
*This product is designed to be inserted between the handlebar and the handlebar end.This product cannot be installed on vehicles with bar ends that do not allow the fixing bolt to pass through the 12mm hole in the center of the product.Please check the bar end you are using beforehand.
*Installation image may include other products.
*There may be changes in product specifications due to the manufacturer's reasons.
*As to AELLA bar ends, please use it by putting between the bar end and the brass weight.
*Depending on the vehicle and product, the length of the screw to hold the bar end may be insufficient for the thickness of the spacer.Please check before installation.
*This product may not be able to installed with aftermarket products.Please check the inside diameter and the shape of the end face of the handlebar before purchasing.
*This product is designed to be inserted between the handlebar and the handlebar end.This product cannot be installed on vehicles with bar ends that do not allow the fixing bolt to pass through the 12mm hole in the center of the product.Please check the bar end you are using beforehand.
*Installation image may include other products.
*There may be changes in product specifications due to the manufacturer's reasons.
Applicable Models
Car models that can be fastened with M6-M12 bolts without any notches or protrusions on the bar ends.
