I have heard the reputation of this Plug, but I tried buying it to be handled by Webike.
So far as Watani's designation OEM DPR Gap 1. I adjusted it to 3 mm and used it. Ignition system and lighting and fans (Cause of voltage eating) And is completely processing Wiring is divided.
Even when I changed Igniter and Coil "Beauty is on fire" Although I was impressed with this, I will go further up when I put this in. The cloudy rush of about 5000 rpm from Clutch meat is like Silky, it seems that generations have gone lightly for about 10 years. I feel that my heart or exhaust smell has also decreased (Lol)
However, it is said that the introduction of Wotani SPll is the Large premise as minimum as Mr. Shimaba says from the import distributor. Horribly Gap is wide so fire will not fly in the same Coil.
If the fans turn around due to heavy traffic in the summer, there are many misfires → JR 8C installed, but ... If you want to enjoy drastic solutions and fine Feel, I recommend this combination.
Discovering the Spark plug that looks like the face on the product explanation screen of Wa Big who happens to be found. Regarding its use, this plug which encourages watani attachment to the ignition system. The purchase decided immediately for a car that meets the conditions! When looking at the real thing, Steel color which Blue took first gets an eye out. The center electrode of the tapping was NGK - Compared to DR8EA, it will be positioned more towards the center of the combustion chamber by 1 mm or more, which will increase expectations for combustion efficiency Up. However, looking at the details, I can not deny the feeling that it is more complicated to make than JAPAN's Plug. BALI of the center electrode and screw terminal type terminal are obviously off center. , I feel a little cheapness because I am watching JAPAN items with high precision from the usual. However, if you actually use it and have sufficient performance and durability, you can say that it is not necessary to request such parts that are not normally visible. I installed it immediately, but the exchange itself is exactly the same as regular Plug exchange and there is no particular problem. The accuracy of the Screw part seems to be a passing point. When I try to cover Plug cap, it is Fashion that Blue 's Steel color looks sharp. And Engine start! - - - That sounds exhaust sound from Mild something more than usual. Because it is a single cylinder, there is a place called Dododo, but it is called Toto. However, rather than being cheesy rather than luxurious - - -. Also, the warm exhaust gas Gas in the winter season has Gas smell, but it feels like it has been relaxed. Impression that Engine braking became Mild when I actually ran. I have stopped playing. Furthermore, Engine vibration seems to be decreasing. Since Cowl was wearing, engine oscillation was swaying the edge of Cowl, as it was Big Li after replacing the Plug, it became impossible to see it. It is feeling that the rise is also powerful though it is Mild. I am surprised that there is such a change with just one Plug. I ran about 20 kilometers, but I did not feel Minus factor. I would like to see the impact on fuel economy and the durability of the plug itself. It is limited to strong motorcycle of watani equipped car or ignition system, but it is recommended plug at the first impression.
This is the second time we are wearing it, but it will start with Cell one shot. (It is natural because it is a new item) The engine is bad for a while and lastly
It was released from trouble because Starter was not used until it was not used. Opportunities to ride will also increase. After replacing the last Plug
I used it for 4 years. I will change it frequently this time.
I took 11,500? This time and replaced it for the first Iridium plugs.
I removed the Seat, lifted the tank and worked, but it took around 20 minutes.
After installing the Plug, when I hung the Engine, Idling was first stable. When I ran it I could actually feel that the rushing up was so different with Smooth. Because it is just a new Plug, it may have felt so - - !
As soon as GB 250 CLUBMAN travel distance is 50000 ?, it purchased and ran well for 29 years.
I used it for Brake before and after NS 250 R.
Somewhat ineffective at the beginning of use, familiar (Atari comes out) It was impossible to impossible until.
Even if familiar, it is Touch feeling that it will be effective as a jiwa ~ っ て rather than being effective with a gutsun.
I think whether it is suitable for those who rush to spirit too much.
Our NS is already a retired Motorcycle from how to ride hard
This is enough braking force.
Or, it's easy to control BrakeTouch.
Just feeling somewhat bad at rainy weather.
Since Base is Orange in appearance, there are also Custom feeling somewhat,
The boundary with Pad is easy to understand, so it is easier to see decrease.
I was able to replace it with a feeling like OEM because I did not need to replace it, especially processing.
About durability is still about 1000 km so I can not say anything, but if I think from the price
I think that it is a product that is fully satisfied.
NGK's Iridium plugs (DPR8EIX-9) It is
With the thing that was installed with OEM Product
It is the same thing..
I felt somewhat worse the engine's blowing, so I decided to exchange it for a new one (^^) /
After Plug replacement, startability is improved and Idling is stable (^-^)
The CB 1300 can not work without removing the tank, but the exchange work was completed in about 20 minutes (^. ^)
I feel good when the rotation of Engine turns comfortably (^ ^ ♪
While maintaining a cold off-season do maintenance
I'd like to go out in the early spring (^ ◇ ^)
Since Air Filter is also K & N, Oil Filter also selects here.
I can use it without problems. O-ring did not match.
It is also good to come with Sticker.
However, K & N's Sticker in the image does not follow
YOSHIMURA's Large Yaku Quantity : 1pc. It was 2 pieces of Small paper.
Since it is the first purchase, if it is a good thing, I will purchase Large quantity and plan to stock it.