Reset output characteristics towards medium and low speed, wide ratio conversion.Although the peak power is decreasing, it improved the running performance in the practical range.
|Kapasitas Tangki||- Liter|
I have heard the reputation of this Plug, but I tried buying it to be handled by Webike.
So far as Watani's designation OEM DPR Gap 1. I adjusted it to 3 mm and used it. Ignition system and lighting and fans (Cause of voltage eating) And is completely processing Wiring is divided.
Even when I changed Igniter and Coil "Beauty is on fire" Although I was impressed with this, I will go further up when I put this in. The cloudy rush of about 5000 rpm from Clutch meat is like Silky, it seems that generations have gone lightly for about 10 years. I feel that my heart or exhaust smell has also decreased (Lol)
However, it is said that the introduction of Wotani SPll is the Large premise as minimum as Mr. Shimaba says from the import distributor. Horribly Gap is wide so fire will not fly in the same Coil.
If the fans turn around due to heavy traffic in the summer, there are many misfires → JR 8C installed, but ... If you want to enjoy drastic solutions and fine Feel, I recommend this combination.
? 【What made you decide the purchase?】
Reliable Brand's NGK. Plug is also NGK so I think that compatibility is also Large.
? 【How was it actually used?】
Motorcycle is old, I feel that Torque has improved in general. Power comes with Axel.
? 【Was it difficult to install? (Hard parts case)】
Work to uninstall Tank and Radiator to remove Ignition coil was quite troublesome. Once you remove the Ignition coil, the code installation work is relatively easy.
? 【Please tell me the point of installation and hang (in the case of Hard parts)】
I straightened this cable from the root of the OEM's Plug cord from the Ignition coil, so I had the power to screw it into the Ignition coil because it was thicker than the OEM code.
? Fit feeling and height when wearing - Please tell me the weight etc (Apparel case) 】Any
? [Is there anything I was disappointed about?]
There is no particular problem.
? [Request to Manufacturer - Please let me know if you have any improvement points]
I would like you to match the thickness of the approximate OEMPlug cord.
? 【Have you compared items?】
Norogy's Hot wire
Confirmation and adjustment are necessary so that the amount of Oil and the amount of fuel do not become thin as much as the combustion efficiency improves.
Discovering the Spark plug that looks like the face on the product explanation screen of Wa Big who happens to be found. Regarding its use, this plug which encourages watani attachment to the ignition system. The purchase decided immediately for a car that meets the conditions! When looking at the real thing, Steel color which Blue took first gets an eye out. The center electrode of the tapping was NGK - Compared to DR8EA, it will be positioned more towards the center of the combustion chamber by 1 mm or more, which will increase expectations for combustion efficiency Up. However, looking at the details, I can not deny the feeling that it is more complicated to make than JAPAN's Plug. BALI of the center electrode and screw terminal type terminal are obviously off center. , I feel a little cheapness because I am watching JAPAN items with high precision from the usual. However, if you actually use it and have sufficient performance and durability, you can say that it is not necessary to request such parts that are not normally visible. I installed it immediately, but the exchange itself is exactly the same as regular Plug exchange and there is no particular problem. The accuracy of the Screw part seems to be a passing point. When I try to cover Plug cap, it is Fashion that Blue 's Steel color looks sharp. And Engine start! - - - That sounds exhaust sound from Mild something more than usual. Because it is a single cylinder, there is a place called Dododo, but it is called Toto. However, rather than being cheesy rather than luxurious - - -. Also, the warm exhaust gas Gas in the winter season has Gas smell, but it feels like it has been relaxed. Impression that Engine braking became Mild when I actually ran. I have stopped playing. Furthermore, Engine vibration seems to be decreasing. Since Cowl was wearing, engine oscillation was swaying the edge of Cowl, as it was Big Li after replacing the Plug, it became impossible to see it. It is feeling that the rise is also powerful though it is Mild. I am surprised that there is such a change with just one Plug. I ran about 20 kilometers, but I did not feel Minus factor. I would like to see the impact on fuel economy and the durability of the plug itself. It is limited to strong motorcycle of watani equipped car or ignition system, but it is recommended plug at the first impression.
It took the Engine to the KICK 2 or 3 times, but after mounting it was almost one shot ok became the most effective!
I could not really feel the effect like the item description of Others, but I feel like I'm feeling somewhat better with a feeling of being?
Afterwards, the appearance is exchanged in any way It is good that the feeling is strong.
Strictly speaking, if you cut the OEM code according to the instructions, the position of the Connecting Connector will be in a difficult position to restore, so I thought that it would be better to do it in the field.
To be honest, I think that there are many people who can not step on Nakanaka exchange with concern about leaking,
With NGKPower cable, since Normal cord and thickness do not change so much,
You can change it directly from Coil.
Since the Plug has also been changed along with the code,
I do not know which effect is, but Engine came to Smooth,
Torque also rose slightly.
Also, it looks nice.
It is recommended for old Motorcycle.