HONDA LEAD110(EX)

  • 25/10/2016

  •  52 views

L 0101read200801 - HONDA LEAD110(EX)

Model Name:LEAD110（EX）

Manufacturer:HONDA

Model Year:2008

LEAD which had been long known as an elegant motor scooter for adults had been renewed to target the commuters who work in urban areas. It had a newly designed water-cooled OHC single cylinder engine which had been made compact by putting the radiator inside the engine unit. Its fuel injection system and its catalyzer made it conform to the emission regulation while improving its cold startability, idling stability, drivability, and fuel efficiency. Though it was equipped with a large 35L size storage under its seat, its seat height was kept low(740mm) to make it easy to handle. Its fuel tank was placed under the floor to lower its center of gravity. It also gave careful consideration to its comfortability and loadability when ridden double by adopting parts such as the 650mm long seat or the aluminum large carrier that was placed in the same height as the seat.

Specifications:

[Basic spec]

Manufacturer HONDA Engine Type Water-Cooled 4 Stroke OHC Single Cylinder
Model Name LEAD110（EX） Starter Self Starter
Grade – Maximum Output (ps) 9.0ps(6.6kw)/7500rpm
Drive Train – Maximum Torque (kgf/m) 0.95kg-m(9.3N-m)/6250rpm
Model Type JF19 Curb Weight 114
Displacement 107 Dry Weight 105(Approximate Value)
Sales Launch Year 2008/1 Fuel Efficiency by Catalog 50.0 km/L (at 60 km/h)
Height/Width/Length 1125/-/1835 Fuel Tank Capacity 6.5
Seat Height 740 Distance to Empty –
Front Tire Indication 90/90-12 44J Fuel Supply Injection
Rear Tire Indication 100/90-10 56J

[Service data]

Standard Plug CR7EH-9 Chain Size –
Number of Used Plugs 1 Chain Link Number –
Engine Oil Amount – Battery Code YTX7L-BS
Engine Oil (Refill) 0.7L Headlight 12V 35w/30w
Engine Oil (Element Replacement) – Headlight Type HS5
Front Blinker Rating – Headlight Remarks –
Drive Sprocket Teeth Number – Tail Light Rating 12V 21w/5w
Driven Sprocket Teeth Number – Rear Blinker Rating –

[Machine detail]

Motor Model Code JF19E Caster Angle 26.5 Degrees
Bore (mm) 50 Trail (mm) 74
Storke (mm) 55 Minimum Ground Clearance –
Compression Ratio 11 Distance Between Axes –
Ignition Method Full Transistor Battery Ignition Streering Angle (Right) –
Engine Lubrication Type Force Feeding & Splash Lubrication Turning Angle (Left) –
Frame Type Underbone Mirror Screw Hole Diameter 10mm
Minimum Rotaion Radius 1.9 Fuel Tank Reserve Capacity –

[Underbody detail]

Front Brake Type Hydraulic Disc Suspension Type (Rear) Unit Swing Type
Front Brake Remarks – Number of Rear Shock Absorbers –
Rear Brake Type Mechanical Leading Trailing Rear Suspension Stroke –
Rear Brake Remarks – Rear Wheel Travel –
Suspension Type (Front) Telescopic ABS –
Front Fork Type – Drive Train Belt Drive
Front Suspension Stroke – Differential Oil Amount –
Front Fork Diameter – Chain Remarks Belt Drive

[Equipment]

Seat Lowering Allowance – Theft Prevention Device Available
Mirror Screw Hole Diameter 10mm Tail Light Bulb Type S25
Mirror Remarks – Tail Light Base Shape BAY15D
Electronic Device Remarks – Tail Light Base Shape 2 –
Fuel Gauge Available Tail Light Remarks –
Clock – Front Blinker Bulb Type –
Hazard – Front Blinker Base Shape –

[Engine detail]

Clutch Type Dry Multiple Plate Shoe Type Tappet Clearance (mm) EX –
Transmission Continuously Variable(V matic) Idling Initial Value (rpm) –
Number of Gears – Needle Steps (Clip Location) –
Gear Ratio – Float Level (mm) –
Primary Reduction Ratio 2.5 Air Screw Return –
Secondary Reduction Ratio 3.769 Main Jet Type –
Variable Speed Vehicle Gear Ratio 2.590 – 0.880 Main Jet Number –
Tappet Clearance (mm) IN –

[Other spec]

Clutch Cable Length – Rear Brake Cable Length –
Choke Cable Length – Other Cables –
Meter Cable Length – Engine Number (Production Launch) –
Throttle Cable Length – Engine Number (Production End) –
Front Brake Cable Length –

[See Moto Index of HONDA]
[See Accessories for HONDA LEAD110（EX）]

Related post

Return Top