- Beranda
- Motor
- KAWASAKI 251 - 400cc
- ZEPHYR400 (ZR400)
- Sparepart Motor
- Bodywork
- Fairing
- Full Fairing
- DOREMI COLLECTION
- DOREMI COLLECTION: Satu Set Tangki Baja
Cek kupon saya
Jumlah
100% Ori
Garansi 7 hr
Gratis Cashback
Nett Tanpa Biaya Tambahan
Model yang Sesuai
Lihat SemuaRincian Produk
Konten ini diterjemahkan oleh Google, jika Anda ingin melihat aslinya, silakan klik
Lihat versi asli
Spesifikasi:
Dasar cat
[Daftar Produk]
Tangki Baja (Spesifikasi Z2 Cap / Spesifikasi Cap Pesawat AP)
FRP Side Cover Kiri / Kanan
FRP Tail Cowl paint basis
[Components]
・Steel tank (Z2 cap spec / AP airplane cap spec.)
・FRP side covers (right and left)
・FRP tail cowl
[Daftar Produk]
Tangki Baja (Spesifikasi Z2 Cap / Spesifikasi Cap Pesawat AP)
FRP Side Cover Kiri / Kanan
FRP Tail Cowl paint basis
[Components]
・Steel tank (Z2 cap spec / AP airplane cap spec.)
・FRP side covers (right and left)
・FRP tail cowl
Peringatan
* Harap diperhatikan bahwa perlu mengganti karet pemandu tangki tahap akhir dan pemrosesan sisi bodi utama saat memasang tangki.
* Silakan gunakan tombol bahan bakar, sensor pengukur bahan bakar porting STD (ZEPHYR 400 OEM).
* Emblem dijual terpisah.
* Harap diperhatikan bahwa item berikut dijual terpisah.
Tank Emblem
Side Cover Emblem
Fender Depan
Lampu ekor
* Perlu pemrosesan untuk pemasangan lampu belakang.
* Ada beberapa kasus yang memerlukan pemrosesan tergantung pada kendaraan saat menggunakan set eksterior tipe Z2 untuk ZEPHYR 400 dan X.
* Berkaitan dengan lokasi pemrosesan
Harap stabilkan fiksasi karet pemandu tangki dengan menukarnya dengan karet pemandu tangki tahap akhir, atau pemrosesan di sisi bodi utama saat memasang pada kendaraan di sekitar tipe awal 400.
Penutup ekor dipasang hanya pada 2 titik di sisi depan (kursi bawah). Oleh karena itu, Anda disarankan untuk menggunakan penyangga penutup mesin sebanyak mungkin di bagian belakang karena akan menyebabkan bagian belakang secara bertahap turun dan merusak penutup mesin. *When installing the tank, you will need to replace the tank guide rubber with the late model tank guide rubber and modify the body side.
*Please use the stock fuel cock and fuel gauge sensor of ZEPHYR400.
*Emblem sold separately
*The following items are sold separately.
・Tank emblem
・Side cover emblem
・Front fender
・Taillight
*Processing is required to install the tail lamp.
*When you use Z2 type exterior set for Zephyr 400 and x, modification may be required depending on the bike.
*About the processing part
・If you are using early model of 400, please replace the tank guide rubber with late model or modify the body to stabilize the fixation of the tank guide rubber.
・The tail cowl is fixed to the front side (under the seat) at two points only.Therefore, it is recommended to use the cowl with the support at the rear as much as possible, because the rear part of the cowl will gradually fall down and cause the cowl to crack.
* Silakan gunakan tombol bahan bakar, sensor pengukur bahan bakar porting STD (ZEPHYR 400 OEM).
* Emblem dijual terpisah.
* Harap diperhatikan bahwa item berikut dijual terpisah.
Tank Emblem
Side Cover Emblem
Fender Depan
Lampu ekor
* Perlu pemrosesan untuk pemasangan lampu belakang.
* Ada beberapa kasus yang memerlukan pemrosesan tergantung pada kendaraan saat menggunakan set eksterior tipe Z2 untuk ZEPHYR 400 dan X.
* Berkaitan dengan lokasi pemrosesan
Harap stabilkan fiksasi karet pemandu tangki dengan menukarnya dengan karet pemandu tangki tahap akhir, atau pemrosesan di sisi bodi utama saat memasang pada kendaraan di sekitar tipe awal 400.
Penutup ekor dipasang hanya pada 2 titik di sisi depan (kursi bawah). Oleh karena itu, Anda disarankan untuk menggunakan penyangga penutup mesin sebanyak mungkin di bagian belakang karena akan menyebabkan bagian belakang secara bertahap turun dan merusak penutup mesin. *When installing the tank, you will need to replace the tank guide rubber with the late model tank guide rubber and modify the body side.
*Please use the stock fuel cock and fuel gauge sensor of ZEPHYR400.
*Emblem sold separately
*The following items are sold separately.
・Tank emblem
・Side cover emblem
・Front fender
・Taillight
*Processing is required to install the tail lamp.
*When you use Z2 type exterior set for Zephyr 400 and x, modification may be required depending on the bike.
*About the processing part
・If you are using early model of 400, please replace the tank guide rubber with late model or modify the body to stabilize the fixation of the tank guide rubber.
・The tail cowl is fixed to the front side (under the seat) at two points only.Therefore, it is recommended to use the cowl with the support at the rear as much as possible, because the rear part of the cowl will gradually fall down and cause the cowl to crack.
PRODUK YANG JUGA DILIHAT
Produk Siap Dikirim dari Gudang Jepang
Rekomendasi buat Kamu
Best Seller
New Custom Article
Gunakan kupon
Review Gambar
Review detail
/