- Beranda
- Motor
- TRIUMPH 751 - 1000cc
- BONNEVILLE T100 "Bonnie"
- Sparepart Motor
- Sparepart Mesin
- Sparepart Pengapian
- Busi
- BRISK
- BRISK: Busi Brisk LGS [BOR12LGS]
Cek kupon saya
Jumlah
100% Ori
Garansi 7 hr
Gratis Cashback
Nett Tanpa Biaya Tambahan
Rincian Produk
Konten ini diterjemahkan oleh Google, jika Anda ingin melihat aslinya, silakan klik
Lihat versi asli
Spesifikasi:
[Jumlah] 1 pc.
[Ukuran]
Diameter ulir 12mm
Reach 19mm
Ukuran kunci pas16mm
[Bentuk] Tipe terminal separation
[Nomor sparepart NGK] D8EA, D9EA, D10EA, DR8EA, DR9EA, DR10EA, DP8EA9, DP9EA9, DP10EA9, DPR8EA9, DPR9EA9, DPR10EA9, DPR8EIX9, DPR9EIX9, DCPR8EK, DCPR8EIX lainnya [Quantity] 1pc.
[Size]
Screw Diameter 12mm
Reach 19mm
Plug Wrench Size16mm
[Shape] Terminal Separate Type
[NGK Correspondence] D8EA, D9EA, D10EA, DR8EA, DR9EA, DR10EA, DP8EA9, DP9EA9, DP10EA9, DPR8EA9, DPR9EA9, DPR10EA9, DPR8EIX9, DPR9EIX9, DCPR8EK, DCPR8EIX other
[Ukuran]
Diameter ulir 12mm
Reach 19mm
Ukuran kunci pas16mm
[Bentuk] Tipe terminal separation
[Nomor sparepart NGK] D8EA, D9EA, D10EA, DR8EA, DR9EA, DR10EA, DP8EA9, DP9EA9, DP10EA9, DPR8EA9, DPR9EA9, DPR10EA9, DPR8EIX9, DPR9EIX9, DCPR8EK, DCPR8EIX lainnya [Quantity] 1pc.
[Size]
Screw Diameter 12mm
Reach 19mm
Plug Wrench Size16mm
[Shape] Terminal Separate Type
[NGK Correspondence] D8EA, D9EA, D10EA, DR8EA, DR9EA, DR10EA, DP8EA9, DP9EA9, DP10EA9, DPR8EA9, DPR9EA9, DPR10EA9, DPR8EIX9, DPR9EIX9, DCPR8EK, DCPR8EIX other
[Deskripsi]
Dengan perlawanan (Jenis Pendaftaran)
RiskPlug memiliki pengaturan PlugGap yang sangat lebar, sehingga perlu memiliki kemampuan pengapian yang cukup untuk melepaskannya ..
Sistem pengapian mobil tua NORMAL mungkin tidak bekerja dengan baik.
Cukup menggunakan Utani SP-2 atau FXDC DYNA SUPER GLIDE CUSTOM2000. Ini juga merupakan pertandingan terbaik untuk V-UP16 / MSA.
Mesin pendingin oli SEA BASS kompatibel dengan model ini ..
Ukuran DPlug NGK ..
Respon nilai termal adalah nomor 8 sampai 10 .. With resistance (Resistor type)
In the vehicle where the tuning of the ignition system is done by Utani SP-2 etc., the effect such as the acceleration, the vibration reduction, and the flat torque characteristic, etc. will be realized as an amazing feeling difference immediately after the plug is changed.
Especially, it shows the overwhelming performance in the high comp high tuned engine.About the vehicle after 2000, because the stock ignition system tends to have enough ability, it tends to be able to function.
However, we have not verified all the vehicles, so please contact us for more information.
In comparison with the ZC/ZS type, the LGS type has better performance in the mid-to-high RPM range power band, while the ZC/ZS type has better flat characteristics in the low and mid RPM range, so please choose according to your application and preference.
NGK D plug size.
Compatibility with NGK plugs is as follows, heat value correspondence is from No. 8 to No. 10.
D8EA, D9EA, D10EA, DR8EA, DR9EA, DR10EA, DP8EA9, DP9EA9, DP10EA9, DPR8EA9, DPR9EA9, DPR10EA9, DPR8EIX9, DPR9EIX9, DCPR8EK, DCPR8EIX, JR8B
RiskPlug memiliki pengaturan PlugGap yang sangat lebar, sehingga perlu memiliki kemampuan pengapian yang cukup untuk melepaskannya ..
Sistem pengapian mobil tua NORMAL mungkin tidak bekerja dengan baik.
Cukup menggunakan Utani SP-2 atau FXDC DYNA SUPER GLIDE CUSTOM2000. Ini juga merupakan pertandingan terbaik untuk V-UP16 / MSA.
Mesin pendingin oli SEA BASS kompatibel dengan model ini ..
Ukuran DPlug NGK ..
Respon nilai termal adalah nomor 8 sampai 10 .. With resistance (Resistor type)
In the vehicle where the tuning of the ignition system is done by Utani SP-2 etc., the effect such as the acceleration, the vibration reduction, and the flat torque characteristic, etc. will be realized as an amazing feeling difference immediately after the plug is changed.
Especially, it shows the overwhelming performance in the high comp high tuned engine.About the vehicle after 2000, because the stock ignition system tends to have enough ability, it tends to be able to function.
However, we have not verified all the vehicles, so please contact us for more information.
In comparison with the ZC/ZS type, the LGS type has better performance in the mid-to-high RPM range power band, while the ZC/ZS type has better flat characteristics in the low and mid RPM range, so please choose according to your application and preference.
NGK D plug size.
Compatibility with NGK plugs is as follows, heat value correspondence is from No. 8 to No. 10.
D8EA, D9EA, D10EA, DR8EA, DR9EA, DR10EA, DP8EA9, DP9EA9, DP10EA9, DPR8EA9, DPR9EA9, DPR10EA9, DPR8EIX9, DPR9EIX9, DCPR8EK, DCPR8EIX, JR8B
Catatan
* Setelah dipesan, produk ini tidak dapat dibatalkan, dikembalikan, atau ditukar.
Peringatan
*Foto produk hanya untuk referensi. Produk ini dijual per 1 pc.
*Jenis register (dengan resistor)
*Ukuran kunci pas adalah 16 mm yang digunakan untuk steker C.
*Alat dengan diameter ulir pemasangan 12 mm dan pemasangan panjang sekrup 19mm semuanya sesuai.
*Terminal rivet dapat dilepas.
*Harap diperhatikan sebelumnya bahwa pembatalan atau pengembalian produk ini tidak dapat dilakukan diterima setelah pesanan dibuat. *This product is a racing part.Even if there are indications of compatible models or plug compatibility, be sure to check for interference with the piston and use at your own risk.
*We are not responsible for any damage to the engine caused by defects in the product.
*Ignition tuned bikes - available.
*Ignition system stock bikes - Not available
*Full transistor ignition bikes - available.
*CDI ignition bikes - Not available.
*4-stroke bikes - available.
*2-stroke bikes - full transistor ignition system is available.
*Brisk LGS plug has become an extremely wide plug gap setting, and because the ignition ability that can only discharge to this is necessary, it may not function sufficiently in the stock ignition system.
*Please note that it does not fit CDI ignition system.For CDI ignition vehicles, Brisk ZC / ZS type fits.
*Images are for reference only.The product is sold by the unit of one bottle.
*Resistor type (with resistor)
*Plug wrench size is 16mm which is used for C plug etc
*The terminal is separable, so it is compatible with any plug cap shape.The terminal is only lightly screwed in at the time of shipment, so please check the tightness of the terminal when installing
*Please refer to the NGK plug list for other compatibility information.All the mounting threads with a diameter of 12mm and a length of 19mm have compatibility.
*The tightening torque is 1.3kg-cm.Be careful of breakage due to overtorque.
*There may be changes in product specifications due to the manufacturer's reasons.
* Please note in advance that cancellation and/or return of this product cannot be accepted once the order has been placed.
*Jenis register (dengan resistor)
*Ukuran kunci pas adalah 16 mm yang digunakan untuk steker C.
*Alat dengan diameter ulir pemasangan 12 mm dan pemasangan panjang sekrup 19mm semuanya sesuai.
*Terminal rivet dapat dilepas.
*Harap diperhatikan sebelumnya bahwa pembatalan atau pengembalian produk ini tidak dapat dilakukan diterima setelah pesanan dibuat. *This product is a racing part.Even if there are indications of compatible models or plug compatibility, be sure to check for interference with the piston and use at your own risk.
*We are not responsible for any damage to the engine caused by defects in the product.
*Ignition tuned bikes - available.
*Ignition system stock bikes - Not available
*Full transistor ignition bikes - available.
*CDI ignition bikes - Not available.
*4-stroke bikes - available.
*2-stroke bikes - full transistor ignition system is available.
*Brisk LGS plug has become an extremely wide plug gap setting, and because the ignition ability that can only discharge to this is necessary, it may not function sufficiently in the stock ignition system.
*Please note that it does not fit CDI ignition system.For CDI ignition vehicles, Brisk ZC / ZS type fits.
*Images are for reference only.The product is sold by the unit of one bottle.
*Resistor type (with resistor)
*Plug wrench size is 16mm which is used for C plug etc
*The terminal is separable, so it is compatible with any plug cap shape.The terminal is only lightly screwed in at the time of shipment, so please check the tightness of the terminal when installing
*Please refer to the NGK plug list for other compatibility information.All the mounting threads with a diameter of 12mm and a length of 19mm have compatibility.
*The tightening torque is 1.3kg-cm.Be careful of breakage due to overtorque.
*There may be changes in product specifications due to the manufacturer's reasons.
* Please note in advance that cancellation and/or return of this product cannot be accepted once the order has been placed.
PRODUK YANG JUGA DILIHAT
Produk Siap Dikirim dari Gudang Jepang
Rekomendasi buat Kamu
Best Seller
New Custom Article
Gunakan kupon
Review Gambar
Review detail
/