Kembali ke atas

NAGAI DENSHI

NAGAI DENSHI adalah perusahaan perintis peralatan ignition dan memiliki reputasi yang baik dalam memproduksi kabel busi silikon. Kabel busi NAGAI DENSHI dapat meningkatkan konduktivitas dan tenaga mesin.

4.3
(21 Ulasan)

5

Sangat Baik

9

4

Baik

10

3

Sedang

2

2

Buruk

0

1

Sangat Buruk

0

Ulasan Produk NAGAI DENSHI

Recently installed on my bike and tested. Constant spark and stable running. Very happy with the product. Recommended item

Although it is perfect for everything, it may be a bit long ~? Although it may be cut, but (~ ^ ^ ;;
It is the most disappointing that I can not see Red code.

CBR250RR (MC22) I bought a for.
The combination will be AS Wotani Full powerKit instead of STDCoil.

As a criterion chosen first

(1) Code 7 mm, Plug cap is OEM Shape.
(2) Low resistance.
(3) High durability.

Based on.

First, (1) From.
There are many other manufacturers such as NGK and splitfire, but the plug cap is OEM Shape - - - Actually there are only Nagai electrons.

As an advantage with OEM Shape, because Waterproof has superior dustproof performance because it has a different lid from tubular shape only.
The disadvantage is that the weight of the lid increases and the mounting process will be more than the tubular shape.

(2) There is a tendency that Manufacturer of Large body is lower resistance than OEM, but since it is already sold as Exclusive Design as added value, there is crimping of terminal, but there is nothing to measure by measuring Length (All four cord lengths are different) , It can be pointed out that you can get through with yourself.

(3) Although it is durable, it has only to gather other information, but the resistance value does not change for 10 years. We adopted the schedule that the degree of deterioration is different from other Manufacturer, such as Review.

By the way, when unused, the resistance value is in order of cylinder

No. 0. 962 KΩ
No. 2. 001KΩ
3rd 1. 007 KΩ
4th. 003 KΩ

And the longest one is why the lowest value for some reason ...

As Demerit, when attaching to CBR 250 RR, it is necessary to attach Terminal nut when using Screw Type Plug. (It is attached to contents. )
Also, it seems that the code is slightly long. I think that it is good to process it short on its own.

Finally, this will be Review for webike, but since there was only one product image and it was difficult to understand, I will give you an image. Please refer.

Since I was able to confirm the leak from the Plug cord, I ordered MAJOR Ultra in the world of the four wheels anyway. The color of Plug cord is Red - You can choose either Gray. It was about 1 week for Production to order, but it arrived 4 days later.
It will take time to replace Plug cord immediately.
Ignition coil Remove the part which is the Screw part at the root, remove the cord, insert the new Plug cord deeply, just complete the Screw part and complete. In this case to note that the length is different for each Cylinder, because selecting the Plug cord together with the OEM and the positional relationship between each Cylinder and the Ignition coil are fixed, add the Cylinder number to the code mounting part of the Ignition coil Write etc. Devices are necessary so as not to make a mistake.
In the case of ZXR 400, it is necessary to install the Brass terminal attached to the Plug Cord Set to the Plug.
I think that it will not be a reference for comparison with the deteriorated Plug cord, but the engine start from Cranking got a little faster and Idling also stabilized.

I attached it to '89 FZr 1000 using Obon vacation.
Because it is Motorcycle 27 years ago indeed, Plug cap has deteriorated as expected,
I was boldly replaced.. Because it just replaces the code of NORMAL, it was easy to exchange it in about an hour with Sun Machine like me. Because the code is quite long, I cut it according to NORMAL. It is a singing phrase with 2 to 3hpPower up, but it certainly felt like a little Torque up. I think the pickup is getting better as well. Unfortunately there are only two choices for Color, Red and Gray. Well Frame and Cowl can not see from the outside at all (Lol).

Looking into the Reserve tank of the sudden Radiator, the capacity was LowGaugeLimit, so I decided to add Coolant. However, since the Reserve tank was installed in a recessed place, I had to remove the Body to replenish it, so it was a little troublesome, so I tried buying the water injection Bottle

I went looking for Home center for the time being, but I gave up so much that I did not like it much. After that I found this Bottle when I was casually looking at the Internet

【Take it in your hands】
- There was no motivation to label Label, there was Wrinkle, and it was deteriorated as feeling that it was kept for years at the back of the warehouse. I wonder if it was a product that could not be sold so well ...?
- Capacity 500 ml, water injection Bottle of 1400 yen But things like scales none at all
- Bottle feels like hardened mayonnaise containers, combined with the fineness of Nozzle strongly pushes hard and water does not go out. Conversely, if you grab it, water will not come out accidentally
- Nozzle can adjust the angle only at the folded part

【Review】
- Since the tip of Nozzle is thin, it is useful for adjusting the amount of water injection Bottle. However, if I think calmly, I was wondering how I paid 1400 yen to the water injection Bottle ... (= Ω =;)

Very well design . You can easy to place or pickup your oil filter without touching the hot engine oil . You can clean your parts using this oil drain pan too. Very convenient design . Hopefully can get larger capacity like 7 or 8 liter for car oil change. Thank you

After using this Plug cord, the look changed.
The atmosphere of the Motorcycle currently edited considerably came out.
attachment is only substituted for an easy and pure Plug cord. also former more well there is no engine performance, and also bad there is nothing -- although it is the said touch, there is no mistake in the goods which can do relief.