Kembali ke atas

NitroHeads MINI

NitroHeads MINI adalah brand yang khusus menyediakan sparepart dan aksesoris untuk motor mini. NitroHeads MINI menyediakan lampu sein dan panel meter berukuran mini dan bergaya klasik yang siap memberikan kesan unik pada motor Anda.

(36 Ulasan)


Sangat Baik












Sangat Buruk


Ulasan Produk NitroHeads MINI

Всем привет ! Посылку получил, в хорошую упаковку упаковано. Из Японии в Новороссийск посылка дошла за месяц. Спасибо !

If possible, Black was good at the center of Rotor, but it was good for reputation, so I did this. I am satisfied with the price. Although the braking force is unlimited and impossible, I think that it is good for ADDRESS V100

OEM's Bracket is so expensive that I bought this.

When I bought it at a different NetShop the last time I got a solid Material Bracket that is not as good as the OEM, but the material that I received this time was Bune's material was very soft and belongs to Gujagnagna. OEMBracket seems to be rolling a Rubber around an iron core, but this product seems to have no iron core inside.
Although it was able to be mounted once, since Rubber is Gignagguha, I am worried whether it will be ridiculed by vibration when I overcame the hard Gap in the forest road etc. Conversely, it became hard to break when you hit it or when it fell down. In that sense this soft bracket may also be present.

【What made you decide the purchase?】
The price was the cheapest in Brake Shoe that conforms to a favorite car
【How was it actually used?】
The effect is almost the same as OEM Product. Only the stepped and stepped buns will work.
I exchanged it with the OEM Product's remaining amount still, but the experience did not change before and after the exchange.
【Was it difficult to install? (Hard parts case)】
I did it at Tire exchange specialty store. (The wage is 3,240 yen including tax, about 10 minutes required)
【Please tell me the point of installation and hang (in the case of Hard parts)】
Removing Brake dust that has accumulated over the years with Parts cleaner
[Is there anything I was disappointed about?] Nothing in particular
【Hope for Manufacturer - Please let me know if you have any improvement points]
I thought that it would be good if I was attached with durability and the presence or absence of use of Asbestos, etc. on the material side and performance comparison table etc
【Have you compared items?】
KITACONon Fade Brake Shoe, NTB products
It is a product with high Cost performance, no problem in terms of performance as it does not change from the original OEM Product

The O-ring on the Cartridge side is assembled, and the entire Body is packed with SEROW Han Film. It is not attached, please be relieved. It is assembled.. Translation (It is difficult to enter here. I buy it because it is cheap.

Although it is in other Impression, braking performance drastically decreases in rainy weather.
It does not work as much as Big Li.
I have put up with it for a long time, but I can not do it anymore. limit.
I reverted to OEM.
It is characteristic of Organic Material.
Braking power does not start up when Pad and Rotor are wet.
Dragging the Brake dragging the moisture away considerably from the front.
Still I am bad at hand - -
Happy Brake - - I guess I have no idea..
Besides OEM, there is only this choice for a car model called TREET.
"Bridge until OEM is available" And "I only ride fine weather" Maybe there is.
It is a picture after about 3,500 km commuting.. (OEMPad new)
The remaining thickness is 5 mm.
I do not measure the initial thickness, I think that it is not reduced by Large.
It is such a way of use that goes by commuting and stops suddenly braking.
OEM was almost exhausted at about 5,500 km, so I think that Pad's Life is certainly long.
It is a feeling that Feel at sunny weather is as good or slightly as braking power as OEM.
It can be used without special discomfort.

Completion will rise considerably depending on ingenuity.
☆ Four items are Waterproof - I thought it would be nice to have some more fabric thickness.
- Rain may penetrate from the seam → Seat thinly paint Silicon sealant on the entire back side, Seat Urethane foam is pre-rice bag etc etc. We put it in a heavy plastic bag of a Completely Waterproof.
Hardness when sitting is covered with Urethane foam Poly bag etc. etc. I am adjusting with.
Urethane foam leakage measures are necessary, but there is no problem at all other than doing it.
Because the fabric is soft, the feeling of mouth is quite good. Even if it is thin it does not matter for durability.
Personally I think that it may be a bit thicker.
Please fasten Tucker exactly while pulling it.
It is glossy than OEM, but it is not enough.

I replaced the Oil Filter of SR 400. Even though the price is cheap, consumables such as O-Ring and Packing are also attached and I am very satisfied. I would like to use it next time as well.