Kembali ke atas

UNIBEAR

UNIBEAR adalah manufaktur rantai sepeda motor asal Cina kelas dunia yang telah berekspansi ke Eropa, Amerika, Jepang, Tmur Tengah, dan Asia Tenggara.

3.7
(16 Ulasan)

5

Sangat Baik

5

4

Baik

6

3

Sedang

2

2

Buruk

1

1

Sangat Buruk

2

Ulasan Produk UNIBEAR

I purchased because I wanted to be an HP 4 race style Aluminum Tank.
My Motorcycle is full Carbon Spec. So it was Large strange that it was taken or scraped because there is no play.
I thought that some processing was necessary, but it was a bit Large strange.
It's awesome as a Guard when you kill.
s1000rr is expensive when you repair with Aluminum Tank

【What made you decide the purchase?】
Mr. Gendaiya has sold a set of R1 Type Cowl for R25.
But I do not want to change everything altogether, "If you look closely it is something different from ordinary R25?" I wanted to do about Makeover. So Tank Cover, which is easy to return to original even in the unlikely event of pricing as well as partly, was sold as Single Item, so I decided to install it.

【How was it actually used?】
First of all, if it says comprehensively, "I'm glad you changed it." I felt it..

<About products>
Other Company ProductCowl is not so high in experience that it is hard to wear it ... (?) but,
In this product, there was no Gap in the position of the screw hole, Tank cap position, etc., and it was possible to mount it almost without machining.

When you install it, the image of the car body changes more than you thought.
If you can see the photos, you can see that the width is wider and the depth is longer compared to the OEM, I feel like the volume of the car has increased.
Especially, the difference when seeing from SIDE is Large, it is subjective, but purely "It's cool!" I feel it..

<Use feeling>
This is also subjective, but the Large has changed.
The reason is that due to the increased depth "The seating surface has become narrow" And, it is the feature of the biggest Large "From the part where the crotch gets hit, the design across Tank cap is close to right angle" is.

As the seating surface narrows, the seated position inevitably becomes closer to the rear, and the body is in a forward tilted posture.
From the part where the crotch hits to compensate for it, because the design through Tank cap is close to orthogonal
It makes it easier for you to deposit your upper body on Cowl, reducing the burden.
I thought it was well thought out Design.

【Was it difficult to install? (Hard parts case)】
As mentioned above, the accuracy of the product was high, so there was no difficulty to that.
If you can desorb Cowl, I think there will be a lot of hardship.

Also, when wearing Cowl, the part surrounded by the red circle in the figure (Quantity : Pair (for Left and Right) Both) Grommet is required.
I think that it is better to order OEM Parts Number at the same time.

【Please tell me the point of installation and hang (in the case of Hard parts)】
Relationship of Cost reduction, Omnibox of R25 which is thin as a whole and feels unreliable, but on the other hand this product is made tightly, and it gets a sturdy impression.
I feel that it is solidly made, but because it is built as tightly, "Wrinkle" There are also people who are a little confused because it is difficult to do.
This side (Seat) From the side, back (Handlebar side) I think that you will be addicted cleanly as you slide it into.

【Fit feeling and height when wearing - Please tell me the weight etc (Apparel case) ]
Because of Hard parts, none.

[Is there anything I was disappointed about?]
It may be because I do not have processing technology,
There is a gap between Tank and Seat. It is caution when rain, car wash, etc. take water.

Overall accuracy was high, but there was a fairly large gap, which was a shame only for that point.

【Hope for Manufacturer - Please let me know if you have any improvement points]
It is how to sell, but Painted (OEM color) I'm glad if things of Lineup are also done.
Especially since it seems that there are many Blue in YAMAHA, it seems that popularity will come out if you join one of Lineup.

【Have you compared items?】
nothing special.

[Others]
The image of this product is Painted's one.
My car body was Blue, so Paint the paint shop (Blue monochrome) When asked, the Gold amount was about 25,000 yen with shipping fee.
So, the Gold amount you spent with Total is around 45,000 yen.
For your reference.

I liked the shape made by LaborWolf, but since there was Twill Weave Carbon, I made it here w
Because Carbon parts of Mr. Tsutaya shop has not been protected against ultraviolet rays, I am asked to paint UVClear thick in a painter. Fitting and finishing of details and the back side are Beauty. There was a slight contamination of the surface on the surface, so the paint shop handled it. If it is installed for Dress-up purpose, it will become white muddy in snow unless UV protection is done. Distortion of the weave is also conspicuous. If there is also a little cheaper COSPA is also 5 ☆ - - - w

I installed it for pre-ride prevention and Hold feeling up in the bank.
The installation comes with a thick Double-sided Tape, floating - Distortion etc. It was able to install tightly without too much The accuracy of the work precision is wonderful!

I also attached other company's Tank end to R1 that I was on before. Material : Because I was FRP, I was concerned about peck peco and dent and this time I chose Plain Weave Carbon daringly. I had a hard feeling of Hold as intended and I think that it was satisfying shopping that was convincing and satisfying without dents.

Simply as Dress-up parts half of Tank is Carbon, I'm fiddling Temporary feeling is already insisting!
It would be more prominent if it was twill weave ...

First, Design was good and it was good that Knee grip became easier.
Although it is an installation, Double-sided Tape is troublesome in case you have to paste it yourself.
The back side is smooth and easy to paste - - - (^-^;

Because I am clumsy, I tried it together before putting it on, but it interferes with Seat a bit.
If you give it above, it will be difficult to open a gap near with Tank Cap.
I removed Seat and installed it, but after all it seems that Seat is not getting attached to me.
Although there is no image, it is like a person who is attached to Tank Pad of Green who is coming earlier.

So, even if you scrape down the bottom part, it interferes with Seat a bit but Seat itself managed to install it.

I want the Instruction Manual.

I always thought that it was clumsy.

Difficult to install with the same model etc.. I saw the imprint, I was concerned but I bought it carefully, like Design.

Product (Material : Plain Weave CarbonType) seems to start making after ordering, it took about 3 weeks, but it arrived in about 2 weeks.

Immediately opened, I feel that the first impression is "thin", and taking it is very light.

s1000rr 2016 year formula (Although it is Chinese Cowl) Although it was attachment to the Screw hole, it fitted well, and I fi t firmly to Tank.

Because of the nature of the product, the Instruction Manual says that some error occurs in each Cowl, and there is some error in the vehicle Body even in the same model, so it sometimes needs correction There..

Recommendation to purchase on understanding it.



A word.
Impossible to install.
Hello Manufacturer, how do you manage?. It is Objection !!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!

Clear paint has deteriorated White by about 2 months after it is attached to the car body.
I want to be honest returned goods!
In the future this manufacturer will never buy again.