Black anodized aluminum. Optional grip end set only. Used to replace the ribbed outer grip end, for another styling. For use in combination with all 2-piece Kustom Tech FL handlebar grips sets.
Black anodized aluminum with a Contrast Cut machined finish. Optional grip end set only. Used to replace the ribbed outer grip end, for another styling. For use in combination with all 2-piece Kustom Tech FL handlebar grips sets.
Polished brass. Optional grip end set only. Used to replace the ribbed outer grip end, for another styling. For use in combination with all 2-piece Kustom Tech FL handlebar grips sets.
Optional grip end set only. Used to replace the ribbed outer grip end, for another styling. For use in combination with all 2-piece Kustom Tech FL handlebar grips sets.
Optional grip end set only. Used to replace the ribbed outer grip end, for another styling. For use in combination with all 2-piece Kustom Tech FL handlebar grips sets.
Optional grip end set only. Used to replace the ribbed outer grip end, for another styling. For use in combination with all 2-piece Kustom Tech FL handlebar grips sets.
Aluminum with a satin finish. Fits 1" diameter handlebars. Both left and right grip comes with 1" internal diameter for use on bikes with a custom internal throttle set-up. At Kustom Tech style is King. It clearly shows in these handlebar grip sets in which each grip consists of two separate parts, smooth for the inner and ribbed for the outer piece, for an ultra cool Kustom look. Note: Great to style match with Kustom Tech hand controls. Note: Optional ribbed grip ends, with different finishes, are separately available to make grip sets in various combination finishes. For optional ribbed grip ends see: 914956 Polished brass. 914957 Satin brass. 914958 Chrome aluminum. 914959 Polished aluminum. 914960 Satin aluminum. 914961 Black anodized aluminum. 914962 Black anodized contrast cut. Note: Compatible with Kustom Tech internal throttle systems 532031 (regular right side throttle action) and 532117 (left side throttle action).
Black anodized aluminum. Fits 1" diameter handlebars. Both left and right grip comes with 1" internal diameter for use on bikes with a custom internal throttle set-up. At Kustom Tech style is King. It clearly shows in these handlebar grip sets in which each grip consists of two separate parts, smooth for the inner and ribbed for the outer piece, for an ultra cool Kustom look. Note: Great to style match with Kustom Tech hand controls. Note: Optional ribbed grip ends, with different finishes, are separately available to make grip sets in various combination finishes. For optional ribbed grip ends see: 914956 Polished brass. 914957 Satin brass. 914958 Chrome aluminum. 914959 Polished aluminum. 914960 Satin aluminum. 914961 Black anodized aluminum. 914962 Black anodized contrast cut. Note: Compatible with Kustom Tech internal throttle systems 532031 (regular right side throttle action) and 532117 (left side throttle action).
Chrome plated aluminum. Fits 1" diameter handlebars. Both left and right grip comes with 1" internal diameter for use on bikes with a custom internal throttle set-up. At Kustom Tech style is King. It clearly shows in these handlebar grip sets in which each grip consists of two separate parts, smooth for the inner and ribbed for the outer piece, for an ultra cool Kustom look. Note: Great to style match with Kustom Tech hand controls. Note: Optional ribbed grip ends, with different finishes, are separately available to make grip sets in various combination finishes. For optional ribbed grip ends see: 914956 Polished brass. 914957 Satin brass. 914958 Chrome aluminum. 914959 Polished aluminum. 914960 Satin aluminum. 914961 Black anodized aluminum. 914962 Black anodized contrast cut. Note: Compatible with Kustom Tech internal throttle systems 532031 (regular right side throttle action) and 532117 (left side throttle action).
Black anodized aluminum with a Contrast Cut machined finish. Fits 1" diameter handlebars. Both left and right grip comes with 1" internal diameter for use on bikes with a custom internal throttle set-up. At Kustom Tech style is King. It clearly shows in these handlebar grip sets in which each grip consists of two separate parts, smooth for the inner and ribbed for the outer piece, for an ultra cool Kustom look. Note: Great to style match with Kustom Tech hand controls. Note: Optional ribbed grip ends, with different finishes, are separately available to make grip sets in various combination finishes. For optional ribbed grip ends see: 914956 Polished brass. 914957 Satin brass. 914958 Chrome aluminum. 914959 Polished aluminum. 914960 Satin aluminum. 914961 Black anodized aluminum. 914962 Black anodized contrast cut. Note: Compatible with Kustom Tech internal throttle systems 532031 (regular right side throttle action) and 532117 (left side throttle action).
Polished aluminum. Fits 1" diameter handlebars. Both left and right grip comes with 1" internal diameter for use on bikes with a custom internal throttle set-up. At Kustom Tech style is King. It clearly shows in these handlebar grip sets in which each grip consists of two separate parts, smooth for the inner and ribbed for the outer piece, for an ultra cool Kustom look. Note: Great to style match with Kustom Tech hand controls. Note: Optional ribbed grip ends, with different finishes, are separately available to make grip sets in various combination finishes. For optional ribbed grip ends see: 914956 Polished brass. 914957 Satin brass. 914958 Chrome aluminum. 914959 Polished aluminum. 914960 Satin aluminum. 914961 Black anodized aluminum. 914962 Black anodized contrast cut. Note: Compatible with Kustom Tech internal throttle systems 532031 (regular right side throttle action) and 532117 (left side throttle action).
Black anodized aluminum finish. Fits 1" diameter handlebars and will take single or dual throttle cables. At Kustom Tech style is King. It clearly shows in these handlebar grip sets in which each grip consists of two separate parts, smooth for the inner and ribbed for the outer piece, for an ultra cool Kustom look. Note: Great to style match with Kustom Tech hand controls. Note: Optional ribbed grip ends, with different finishes, are separately available to make grip sets in various combination finishes. For optional ribbed grip ends see: 914956 Polished brass. 914957 Satin brass. 914958 Chrome aluminum. 914959 Polished aluminum. 914960 Satin aluminum. 914961 Black anodized aluminum. 914962 Black anodized contrast cut.
Fits 1" diameter handlebars and will take single or dual throttle cables. At Kustom Tech style is King. It clearly shows in these handlebar grip sets in which each grip consists of two separate parts, smooth for the inner and ribbed for the outer piece, for an ultra cool Kustom look. Note: Great to style match with Kustom Tech hand controls. Note: Optional ribbed grip ends, with different finishes, are separately available to make grip sets in various combination finishes. For optional ribbed grip ends see: 914956 Polished brass. 914957 Satin brass. 914958 Chrome aluminum. 914959 Polished aluminum. 914960 Satin aluminum. 914961 Black anodized aluminum. 914962 Black anodized contrast cut.
Black anodized aluminum with a Contrast Cut machined finish. Fits 1" diameter handlebars and will take single or dual throttle cables. At Kustom Tech style is King. It clearly shows in these handlebar grip sets in which each grip consists of two separate parts, smooth for the inner and ribbed for the outer piece, for an ultra cool Kustom look. Note: Great to style match with Kustom Tech hand controls. Note: Optional ribbed grip ends, with different finishes, are separately available to make grip sets in various combination finishes. For optional ribbed grip ends see: 914956 Polished brass. 914957 Satin brass. 914958 Chrome aluminum. 914959 Polished aluminum. 914960 Satin aluminum. 914961 Black anodized aluminum. 914962 Black anodized contrast cut.
Black anodized aluminum and polished brass combination finish. Fits 1" diameter handlebars. Both left and right grip comes with 1" internal diameter for use on bikes with a custom internal throttle set-up. At Kustom Tech style is King. It clearly shows in these handlebar grip sets in which each grip consists of two separate parts, smooth for the inner and ribbed for the outer piece, for an ultra cool Kustom look. Note: Great to style match with Kustom Tech hand controls. Note: Optional ribbed grip ends, with different finishes, are separately available to make grip sets in various combination finishes. For optional ribbed grip ends see: 914956 Polished brass. 914957 Satin brass. 914958 Chrome aluminum. 914959 Polished aluminum. 914960 Satin aluminum. 914961 Black anodized aluminum. 914962 Black anodized contrast cut. Note: Compatible with Kustom Tech internal throttle systems 532031 (regular right side throttle action) and 532117 (left side throttle action).
Black anodized aluminum and polished brass finish. Fits 1" diameter handlebars and will take single or dual throttle cables. At Kustom Tech style is King. It clearly shows in these handlebar grip sets in which each grip consists of two separate parts, smooth for the inner and ribbed for the outer piece, for an ultra cool Kustom look. Note: Great to style match with Kustom Tech hand controls. Note: Optional ribbed grip ends, with different finishes, are separately available to make grip sets in various combination finishes. For optional ribbed grip ends see: 914956 Polished brass. 914957 Satin brass. 914958 Chrome aluminum. 914959 Polished aluminum. 914960 Satin aluminum. 914961 Black anodized aluminum. 914962 Black anodized contrast cut.
Aluminum and brass with a satin finish. Fits 1" diameter handlebars and will take single or dual throttle cables. At Kustom Tech style is King. It clearly shows in these handlebar grip sets in which each grip consists of two separate parts, smooth for the inner and ribbed for the outer piece, for an ultra cool Kustom look. Note: Great to style match with Kustom Tech hand controls. Note: Optional ribbed grip ends, with different finishes, are separately available to make grip sets in various combination finishes. For optional ribbed grip ends see: 914956 Polished brass. 914957 Satin brass. 914958 Chrome aluminum. 914959 Polished aluminum. 914960 Satin aluminum. 914961 Black anodized aluminum. 914962 Black anodized contrast cut.
Polished aluminum and brass combination. Fits 1" diameter handlebars. Both left and right grip comes with 1" internal diameter for use on bikes with a custom internal throttle set-up. At Kustom Tech style is King. It clearly shows in these handlebar grip sets in which each grip consists of two separate parts, smooth for the inner and ribbed for the outer piece, for an ultra cool Kustom look. Note: Great to style match with Kustom Tech hand controls. Note: Optional ribbed grip ends, with different finishes, are separately available to make grip sets in various combination finishes. For optional ribbed grip ends see: 914956 Polished brass. 914957 Satin brass. 914958 Chrome aluminum. 914959 Polished aluminum. 914960 Satin aluminum. 914961 Black anodized aluminum. 914962 Black anodized contrast cut. Note: Compatible with Kustom Tech internal throttle systems 532031 (regular right side throttle action) and 532117 (left side throttle action).
Fits 1" diameter handlebars and will take single or dual throttle cables. At Kustom Tech style is King. It clearly shows in these handlebar grip sets in which each grip consists of two separate parts, smooth for the inner and ribbed for the outer piece, for an ultra cool Kustom look. Note: Great to style match with Kustom Tech hand controls. Note: Optional ribbed grip ends, with different finishes, are separately available to make grip sets in various combination finishes. For optional ribbed grip ends see: 914956 Polished brass. 914957 Satin brass. 914958 Chrome aluminum. 914959 Polished aluminum. 914960 Satin aluminum. 914961 Black anodized aluminum. 914962 Black anodized contrast cut.
Soft, durable rubber grip sets. The white plastic end flange, at the switch housing end, is removable. Ready for anybody willing to break with grip-traditions. Note: For use on specific 08-25 e-throttle models you will require a replacement throttle sleeve, like 514714. The OEM rubber grip is a molded one-piece with the 08-25 stock throttle sleeve and they cannot be separated.
Soft, durable rubber grip sets. The white plastic end flange, at the switch housing end, is removable. Ready for anybody willing to break with grip-traditions. Note: For use on specific 08-25 e-throttle models you will require a replacement throttle sleeve, like 514714. The OEM rubber grip is a molded one-piece with the 08-25 stock throttle sleeve and they cannot be separated.
Soft, durable rubber grip sets. The white plastic end flange, at the switch housing end, is removable. Ready for anybody willing to break with grip-traditions. Note: For use on specific 08-25 e-throttle models you will require a replacement throttle sleeve, like 514714. The OEM rubber grip is a molded one-piece with the 08-25 stock throttle sleeve and they cannot be separated.
Brass throttle cable accents for S&S Super E & G carburetors. Works in custom applications with single cable applications only. Includes throttle spool, acorn nut and (single) cable guide.
Polished aluminum & polished brass. For use with a custom internal throttle systems that required two handlebar grips that both have an internal diameter of 1" (25.4mm).
Black anodized aluminum & polished brass. For use with a custom internal throttle systems that required two handlebar grips that both have an internal diameter of 1" (25.4mm).
Chrome plated aluminum. Fits 1" handlebars and is used to make a smooth transition between the handlebar and the grips. Outer diameter 33mm. To be installed with silicone adhesive. Great for many custom applications and perfect to style-match with Kustom Tech's own handlebar master cylinders.
Black anodized aluminum. Fits 1" handlebars and is used to make a smooth transition between the handlebar and the grips. Outer diameter 33mm. To be installed with silicone adhesive. Great for many custom applications and perfect to style-match with Kustom Tech's own handlebar master cylinders.
Polished aluminum. Fits 1" handlebars and is used to make a smooth transition between the handlebar and the grips. Outer diameter 33mm. To be installed with silicone adhesive. Great for many custom applications and perfect to style-match with Kustom Tech's own handlebar master cylinders.
Accossato Racing grips are designed by a study direct made with the major Team of the SBK Championship. Particular characteristic of these product is the grip studied to give the the drive more comfort and can do less efforts to the grips. Black is the main color . but on request other options. On 2012 They have become part of the Catalog. ACCOSSATO Racing also GP gel black grips, personalized with red writing ACCOSSATO Racing. Dual gel sensity system made double layer leading the grip duration and comfort to exceptional levels . Length 122mm diameter 24 mm on brake side 22mm on clutch side
Article No: 500-021 Features oversized 3D knurled rubber design with dual integrated channels for comfort and increased grip Excellent hand traction and comfort in all riding scenarios CNC-machined billet inner collar & end cap Arlen Ness laser logo included on each end cap Internal grip tube design installs like factory grips; no glue required for installation Base Color - Red Base Finish - Anodized Color/Finish - Black, Red Features - with Closed Ends For Handlebar Diameter - 25,4 mm (1") Material - Aluminum, Rubber Model - Speedliner Mount Style - Standard Product Name - Grips Style - Throttle-By-Wire Texture - Dual Units - Pair
Article No: 500-020 Features oversized 3D knurled rubber design with dual integrated channels for comfort and increased grip Excellent hand traction and comfort in all riding scenarios CNC-machined billet inner collar & end cap Arlen Ness laser logo included on each end cap Internal grip tube design installs like factory grips; no glue required for installation Base Color - Gold Base Finish - Anodized Color/Finish - Black, Gold Features - with Closed Ends For Handlebar Diameter - 25,4 mm (1") Material - Aluminum, Rubber Model - Speedliner Mount Style - Standard Product Name - Grips Style - Throttle-By-Wire Texture - Dual Units - Pair
Article No: 500-019 Features oversized 3D knurled rubber design with dual integrated channels for comfort and increased grip Excellent hand traction and comfort in all riding scenarios CNC-machined billet inner collar & end cap Arlen Ness laser logo included on each end cap Internal grip tube design installs like factory grips; no glue required for installation Base Color - Red Base Finish - Anodized Color/Finish - Black, Red Features - with Closed Ends For Handlebar Diameter - 25,4 mm (1") Material - Aluminum, Rubber Model - Speedliner Mount Style - Standard Product Name - Grips Style - Cable Texture - Dual Units - Pair