With stabilizer [Body finish] Buffing [Material] Main Pipe: Super duralumin 7N01 material/deformed figure of merit cross section (triple square) Chain puller: A5083 Material [Specification] Pivot: Machined/pivot section is ball bearing + needle bearing Chain adjuster: Racing Adjuster Type (Standard) Adjusting range: exact same dimensions *This product may not be in the desired position due to chain and sprocket size change and chain adjustment. Axle Shaft: Dedicated Axle Shaft / Nut included Brake:Compatible with stock caliper/support Wheel:Compatible with stock wheel [Weight] 6.7kg [Compatible exhaust] STRIKER STREET CONCEPT / INTER MODEL Full Exhaust confirmed.
With stabilizer [Body finish] Semi-gloss black finish [Material] Main Pipe: Super duralumin 7N01 material/deformed figure of merit cross section (triple square) Chain puller: A5083 Material [Specification] Pivot: Machined/pivot section is ball bearing + needle bearing Chain adjuster: Racing Adjuster Type (Standard) Adjusting range: exact same dimensions *This product may not be in the desired position due to chain and sprocket size change and chain adjustment. Axle Shaft: Dedicated Axle Shaft / Nut included Brake:Compatible with stock caliper/support Wheel:Compatible with stock wheel [Weight] 6.7kg [Compatible exhaust] STRIKER STREET CONCEPT / INTER MODEL Full Exhaust confirmed.
・Standard length ・Pivot bearing specification ・Racing stand hook equipped as standard ・Black Gun Kote™ finish ・Stock and OVER Racing wheels compatible ・Stock caliper / OVER Racing caliper support compatible ・Semi-customization is not available
・Standard length ・Pivot bearing specification ・Racing stand hook equipped as standard ・High-durability polished finish *Do not use compounds or degreasers. ・Stock and OVER Racing wheels compatible ・Stock caliper / OVER Racing caliper support compatible ・Semi-customization is not available
・Machined aluminum main arm ・Black Gun Kote™ finish ・U-shaped chain block adopted ・Racing stand hook standard equipment ・Stock chain guard/inner fender can be installed ・Pivot section needle / ball bearing ・Standard width / Standard length ・Compatible with stock steps ・Compatible with stock wheels and rear brake calipers ・Semi-customization is not available
・Standard length ・Elliptical type (Main pipe: 45 x 35mm) ・Without stabilizer ・Pivot bearing specification ・Standard wheel support ・Stock pillion step can be used ・Weight: 2.49kg(STD3.82kg)
・Machined aluminum main arm ・U-shaped chain block adopted ・Racing stand hook standard equipment ・Stock chain guard/inner fender can be installed ・Pivot section needle / ball bearing ・Basic dimensions are standard width, standard length ・Compatible with stock tire size 180/55-17 ・Torque rod is welded to standard position
・OV-MINI Type (Main pipe: 40 x 29mm) ・Without stabilizer ・Pivot bearing specification ・Polished finish ・Standard wheel support ・Long brake rod included
[Material]7N01,A5083 material used Surface treatment] Buffing [Included Parts:] (1)Chain Pull Piece:Quantity:1 Set (Exclusive use only) (2)Twin Shock Suspension Receiver Bolt:Quantity:1 Set (3)DrumBrake Rod:1 (depending on length of Swing Arm)
[Material]7N01,A5083 material used Surface treatment] Buffing [Included Parts:] (1)Chain Pull Piece:Quantity:1 Set (Exclusive for each Pipe shape) (2)Twin Shock Suspension Receiver Bolt:Quantity:1 Set (3)DrumBrake Rod:1 (depending on length of Swing Arm)*discSpec. Not included in the case of (4)Axle Shaft 250mm:One (Repair part number 38053) (5)Axle Collar20mm:One (Repair part number 394216)*discSpec. Not included in the case of (6)Axle NutM12:One (Repair part number 38001)
Hose 2:YAMAHA CYGNUS X Gen4/Gen5/BWS R ・Color:Red,Orange,Gold,Green Light,Blue,Purple,Black,Titaniumium gray,Silver ・Included Parts::Swing ArmLINK,Caliper support ・Material:Titanium
Triple squareMiddle(60mmX25mm Pipe) *In case of +6cmSwing Arm, the number of chain links is 106 LINKs to various types of chains (+2cm and +4cm are under verification). Recommended License Plate Holder BilletLicense Plate Holder (31530)*Under development *OEMCaliper can be installed *This product comes standard with an interchangeable chain slider Material/Surface Treatment:Aluminum/Anodized Finishing Option Explanation ・Stand HookBase(M6)(60903) *Mounting Screw M6 Recommended STAND (when using 60904Stand Hook Type-2) Various Roller stands made by J-TRIP STAND Receiver JT-107A2
・Triple square middle (60mm x 25mm pipe) *In the case of a +6cm swingarm, the number of chain links is 106 (+2cm, +4cm are not yet confirmed) Recommended License Holder: Billet License Holder (31530) *Under development *Stock calipers can be installed *This product comes standard with interchangeable chain slider Material / Surface treatmentAluminum / Anodizing finish
Pre-assembled finished product [Material] Pipe:7000 series Aluminum material End peace:A7N01 SeraCoatBlack Finishing Japanese Vehicle Inspection Correspondence(Maximum length 15mmLong) OEM and external Wheel Rear rim width 550/600Size compatible OEM/AMERICAN DREAMCarbon rear fender can be used.