Relief

It seems to be strong but not too large, so I think it will go well with thin summer wear. View detail

For lightness!

[How is it used? Purchased as Chest Protector for Thailand Chi AirTruckParka RSJ333.

Was the one you received as per Image? As per Image.

How was your experience with it? No problem, no problem.

[Points to note] None in particular

How did it compare to other products? I was looking for something lighter than the Thailand Chi SeparateChest Protector TRV079, so it met my objectives.

Other items that would be helpful
It can be attached to the Snap button on the Point of Installation or the hang/Thailand Jacket.

Items to be purchased together/nothing in particular if you choose the bag included.

Opinions and requests to Manufacturer/I wanted the ZipperBody? (moving part) to be hidden when closed. View detail

Stack them up to increase defense!

Was the one you received as per Image?
At first glance, it looks like a slightly hard urethane sponge, which may seem a little uneasy to protect from the impact of an accident, but it is certified under the European standard EN1621-3Level 1. [Color] Since it is Clear, the performance is probably guaranteed to a certain extent.

[How did you feel about the Fit?
I usually wear Komine's JK-574 full year touring jacket Rama II, and although this jacket originally had a Chest Protector called SK-689 Inner chest guardSF as Standard Equipment, I have not used it. The SAS-TECChest Protector is a thin plastic and urethane foam protector, so I use it over the SAS-TECChest Protector. I don't end up using the special bag that comes with this product. 2 layers of Chest Protector gives me some pressure when I put on the jacket, but I don't mind it while riding.

How was your experience with it?
The Protector is somewhat stiff when cold, but becomes quite squishy and soft when warmed by body heat. It is good that the Protector fits to the body shape, but I am concerned about whether it can really protect the chest area. Impact "surface" I guess it's fine when you take it in the "point" I feel that it is quite bad when the product is subjected to a The fact that there are holes all over the Protector to ensure ventilation also makes the impact "point" The "M" in the name of the "M" is not supposed to be used in the case of the "M". For this reason, we thought it would make sense to use Komine's PlasticProtector on the front side and this SAS-TECProtector on the lower side (body side).

[Was there anything that disappointed you?
As long as we don't have accidents, we won't be disappointed, so we will strive to have no accidents!

How did it compare to other products?
However, since there was some concern about using it alone, we decided to use it in combination with Komine's Chest Protector by overlapping it on the underside (body side) of the Chest Protector. View detail

Easy to install, large and secure.

I bought this product to attach to my Thailand summer jacket, the Viento Air Jacket. The ProtectorBody can be removed from the Cover, so it is good that you can wash the Cover Only that is dirty with sweat. It is better not to encounter Situation to be able to confirm the extent of the effect, but I think that it is better to have less Damage to the body even a little in case of emergency, so I think that it will bring a good effect mentally to have a sense of security plus when I am riding. Considering that I buy a new one every few years, I appreciate this price. View detail

have great influence over

I saw one worn on a DAYTONA Adventure Jacket, so I bought it to try it out. As I thought, it can be used for urbanism and Thailand. Some things need a little sewing, but there is also a problem. The only problem is that it is a separate type, so the rigidity is weak and it is vulnerable to shocks, unlike the Protector which is molded as one piece. So, I don't use it after all. View detail

good product

I used it for Honda's Jacket, but the Button did not slip off or fall out It was able to use The thickness for the performance function, I think that it is inevitable, but Size is a little Large for the one who is made a little Large is more secure View detail

It was true that the Button was weak

I thought I'd see a lot of reviews that said the Button was weak and could be taken off, but it was brilliant I pulled it off

One of the snap buttons is loose and it took my head when I took it off the jacket I was able to deal with that with glue The head of the Button itself was a little small to begin with, though I could deal with it with glue It's just a hand on and off of the jacket and it comes off I guess it's for cost, but I wish they would pay a little more attention to the quality of the Button

The pad itself is soft when pressed slowly, and feels hard when pressed quickly, so it hardens instantly I understand that this is what it means The thickness is also firm and the shock-absorbing power will be sufficient
Because of the soft pad, it follows your body very well and it is a hellip; however, it gets harder when it gets cold I only use it in the summer because it's attached to Thailand's Mesh I was surprised to see it in Chica Chi If you wear it, it will return by body heat, but this is a phenomenon not seen in other Softpads

Quantity for Large sizes:Pair (for Left and Right) It is almost the same as Komine's one piece and not so small When you install it, you can install it near the Center without any gap It also complements the defense in the Center area
But for a similar concept, there is now the TRV079 from Thailand Chi There is no reason to dare to choose this product from View detail

Cost performance good

Purchased for use with the Urbanism 3SeasonJacket I don't know about the performance if I don't meet the accident, but the fit feeling is good and the price is also good for Thailand and other countries I was able to buy it much cheaper than Honda's, so I'm happy with the Honda Mesh jacket I plan to use it next summer View detail

For added peace of mind

It is used with Urbanism and Honda's Jacket, because it has a good fit and softness It doesn't feel different, because you don't know how well it performs as a Protector until you meet an accident? It is View detail

Smaller than I thought

Since there are several Jackets and ChestProtector-compatible outerwear with corresponding buttons, we planned that they can use all around by adding Surface Fastener and Button, so I bought it.
In 1st fitting attachment and detachment, the caulk of Gold genus Button is 1pc. Mocked.
One Side Three Buttons so I can use it for now but I can not deny disappointment.
Also, I thought that I could cover up to the side of the armpit a little by the impression from the photograph, I could only cover about 70% of the front of the chest with Smize for the first time than I imagined Size Anxiety remained.
It seems to be Material-like Merit but fortunately I am not in the accident so the effect is unknown.
I think I'm sorry I became a negative impression, but this is an honest impression after purchase.
I think whether it is okay to buy a new Large Body and if you can install it firmly on Jacket. View detail

Jacket who happened to buy it made by Honda

Since there was a second used Jacket, it purchased. Since there was a hook at the chest, I held a chest protector (Velcro installation) I wanted to turn on making an Adapter with a hook on Velcro, but I do not sell such a huge hook. Buy this item because it was with Adapter. I thought that the contents should be resold but I decided to use it as it is quite good. It is a bit uneasy to say Separate type, but if you do not hit the Center part at Pinpoint it will not be a problem. By the way, most of the cause of breaking ribs is when you stroll in the side, most Chest Protector can not protect. SAS-TEC also uses it for elbow and trusts accordingly.
I feel like I've run a little, I feel that I do not feel much wearing too much. Although many holes are open, I do not know the ventilation because I attach Harness of hit-air on top. View detail

Balance of safety and fit

In consideration of safety, the Chest protector of this hand is decided to be better for Hard Type, but the sense of fit is bad.
And when you wear it, Forme also looks like a pigeon breast and is not cool.

For that reason it is getting more and more troublesome to install.

But I can not ignore safety, it will be Soft Type as a compromise.
This product is a type that hardens momentarily when it receives a shock while it is a Soft Type.
(It does not cure materially)


It is inferior to Hard Type, but still a sense of security is quite different than running without mounting it.
We used it for Jacket of Kadoya, but it was able to be installed without problems.

As a precaution, considering premising it with Back Protector, there is a point that choosing 1 Size Large than usual does not become cramped.
View detail