Check my coupons
Product Detail
Specification:
for Rear
Material: Chromoly High Tensile Strength Steel Used
Size: 420
Material: Chromoly High Tensile Strength Steel Used
Size: 420
[Description]
A wide variety of teeth and a reasonable price support tuners to enable detailed setting.
Made of chromoly high-tensile steel for high durability.
Made of chromoly high-tensile steel for high durability.
Note
Please visit the Manufacturer's website for more information on the product.
Click here to buy chain brushes.
* The image is only for reference. The image shown may differ from the actual product.
Caution
*The drive / driven sprocket is a consumable item.Check the sprockets every 1000km as a guide for general riding.(If the tip of the tooth has become thin, please replace it.The life of the sprocket and chain can be greatly improved by daily lubrication.)
*The number of rear sprockets T ÷ the number of front sprockets T = deceleration ratio The higher the value of this deceleration ratio, the more acceleration is emphasized, and the lower the value, the more maximum speed is emphasized.
*Z125 PRO is not compatible with 25T driven sprocket (rear).
*If you change the number of teeth to other than the stock number, the speedometer display will show an error.In this case, use the speed pulse conversion unit (762-4030100).
*Depending on the model of vehicle, the number of T's that cannot be installed or the guide plate may need to be replaced or a speed conversion pulse unit may need to be installed.Please refer to the compatibility chart for details.
*The number of rear sprockets T ÷ the number of front sprockets T = deceleration ratio The higher the value of this deceleration ratio, the more acceleration is emphasized, and the lower the value, the more maximum speed is emphasized.
*Z125 PRO is not compatible with 25T driven sprocket (rear).
*If you change the number of teeth to other than the stock number, the speedometer display will show an error.In this case, use the speed pulse conversion unit (762-4030100).
*Depending on the model of vehicle, the number of T's that cannot be installed or the guide plate may need to be replaced or a speed conversion pulse unit may need to be installed.Please refer to the compatibility chart for details.
