Swingarm Triple Square

  • Product number: 90046
    • IN STOCK
    • Out Stock

Rp7,543,000

*VAT 11% included

Webike Points: +75,430 Points

Delivery information

  • Please select product form first.
to Jakarta, South Jakarta, Cilandak
CHANGE
Select address
Shipping Fee Rp30,000
Check my coupons

Quantity

100% Original 7 Days Warranty Free Cashback Net Price

Applicable Models

See All

Product Detail

Specification:

for Twin Shock
for STD Wheel
Swingarm Pipe Shape: Triple Square
Stabilizer: -
Material: Aluminum 7N01

[Description]


Standard width swingarm for Monkey (for Monkey hub) swingarm is manufactured with the same width as stock Monkey swingarm (167-170mm width).
The stock Monkey hub can be used as is, and the G-Craft part number: 39053 rear disc hub can be used.
This swingarm is compatible with both drum and disc.
This is G-Craft's most popular swingarm with a wide selection of lengths.
The triple square pipe swingarm with a strong cross section is the most popular pipe among users who choose 16cm or longer.

■Option Description
[Swingarm finish]
・Black anodized finish (G-Craft part number: 60198)
・Cerakote finish (G-Craft part number: 60807)
[What is Cerakote?]
Cerakote is a special heat coloring and normal temperature paint manufactured by NIC and currently used by the US military.
It has been inspected to meet the harsh conditions, and has excellent heat resistance, abrasion resistance, durability, solvent resistance, heat dissipation, heat insulation and other performance-oriented research and production.
Ceramic is crushed by a special machine and mixed into the paint to improve the strength of the paint film.Therefore, the surface becomes pear-shaped, but the coating film can be made very thin (25 microns)
Weld marks (beads) can be left on the surface without being hidden.
The adhesion is the highest among all coating materials, and the surface treatment is suitable for frames and swingarms because it does not wrinkle even when bent, and the paint does not peel off easily even by stepping stones.
*Please allow 3 to 5 weeks for normal delivery.
[Option 1] Chain slider bolt fixing specification (G-Craft part number:60228)
Change the chain slider from riveted to bolted.Easy to replace when worn out.
[Option 2] Stand hook base (M6) additional processing (G-Craft part number: 60903)
G-Craft stand hook or aftermarket stand hook (M6) can be attached.
[Option 3] Chain pull option
・Racing stand hook specification (G-Craft part number: 60186)
 The rear part of the conventional chain pull can be used as a stand-hook.G-Craft Part Number: The 32071, 32072 and 32073 racing stand hooks can be installed.
 *G Kraft Part Number:33170AP Lockheed caliper support cannot be installed (will interfere)
・Back pull type (G-Craft part number: 60221)
 This backward pull adjuster is designed to eliminate the hassle of adjusting the chain.
Since the adjusting nut is located at the last part of swingarm, it is easy to adjust the adjusting part which was difficult to turn due to interference of tools.
*Can not be installed on the racing stand hook specification and OW type at the same time
・OW type (G-Craft part number: 60014)
 The chain puller is tapered to eliminate vertical misalignment of the axle shaft.
 The tapered frame moves so there is no vertical misalignment.This mechanism is also used for swingarms of big bikes.
・OW type racing stand hook specification (G-Craft part number: 60188)
 The rear part of OW type chain pull is changed to stand hook specification.
G-Craft Part Number: The 32071, 32072 and 32073 racing stand hooks can be installed.
 *G Kraft Part Number:33170AP Lockheed caliper support cannot be installed (will interfere)
・Eccentric type (G-Craft part number: 60059)
 This is an eccentric type chain puller commonly found on Kawasaki motorcycles.
 *Only caliper supports with calipers attached to the lower part of the swingarm can be used on disc models.
*Swingarm for wide wheel can be used only with disc specification.

Note


Click here for other G-Craft Monkey Twin Shock Swingarms.
Here are other swing arms for G-Craft Monkey Monoshock.
Click here for other G-Craft Monkey truss swing arms.
Click here for Other G-Craft Monkey Normal Look Swingarm.
Click here for Other G-Craft Monkey R Wheel Mount Twin Shock Swingarm.
For other G-Craft Standard Wheels Twin Shock Swingarm is here.
Click here for other G-Craft NSR wheel mounted twin shock swing arms.
Click here for other G-Craft Twin Shock Swingarm for Super Wide Wheels.
For other G-Craft Wide Wheel Twin Shock Swingarm is here.
* The image is only for reference. The image shown may differ from the actual product.

Caution

*8 inch up to 4.0J (disc up to 3.5J), 10 inch up to 4.0J can be installed (10 inch needs more than +4cm)
*Only triple square pipe, chain slider is also attached at the bottom.
*The Type 2 with Standard Stabilizer has a 42mm x 32mm main pipe.(Normal standard stubby is 32mm x 32mm thin pipe)
*The rear shock is attached in the shape of "C", but there is no problem in use.
*The length of the brake stopper must be 25mm from the tip of the disc.
*Image 3 is optional: This is an image of the chain slider bolt fixing.
*Image 4 is optional: The image above shows Stand Hook Base (M6).
*Image 5 is an image of the chain pull option.
(1) Chain adjuster: Back pull type
(2) Chain adjuster: Standard (Racing stand hook specification)
(3) Chain adjuster: OW type (Racing stand hook specification)
 (4) Eccentric type

Applicable Models

ALSO VIEWED PRODUCTS

PRODUCT READY TO SHIP

Recommend for You

BEST SELLING

MOST VIEWED PRODUCTS

See all

New Custom Article

See all