Condor Φ7/8-inches Handlebar Steel

  • Product number: HB0020B-01
    • IN STOCK
    • Out Stock

Rp920,000

*VAT 11% included

Webike Points: +9,200 Points

Delivery information

  • Please wait...
to Jakarta, South Jakarta, Cilandak
CHANGE
Select address
Shipping Fee Rp30,000
Check my coupons

Quantity

100% Original 7 Days Warranty Free Cashback Net Price

Applicable Models

See All
HORNET250 *Need to drill switch hole APE 50 08-12 (FI Drum Brake) *Processing of switch holes is required APE 50 -07|08 (Carburetor)*APE100 (09-) only APE 100 -12 (drum brake)*APE100 (09-) requires drilling of switch holes. VTR250 03-07 MC33 (1020001-)*Processing of switch hole required|* Required side cap (for 18mm ID) NC700S 12 (except for ABS and DCT cars) *Processing of switch hole is required|* Required side cap (for 18mm diameter) FTR223 (with side numbers) * Requires modification of the clutch cable and choke cable. FTR223 (without side numbers) * Requires modification of the clutch cable and choke cable. CB750 04- RC42 *Processing of switch hole required|* Required side cap (for 18mm ID) CB400SF -98 NC31 *Processing of switch hole required|* Required side cap (for 18mm ID) CB400SS *Requires drilling of switch hole|* Requires side cap (for 18mm diameter) CB1300SUPER BOLDOR 10-12 *Processing of switch holes required|* Required side cap (for 18mm ID) CB1300SUPER BOLDOR 05-09 *Processing of switch hole required|* Required side cap (for 18mm ID) MONKEY 09-12 (AB27-1900001-)(FI)(FI cars)* Requires Top Bridge H30 Holder or MONKEY Handle Holder|* Requires drilling of switch hole MONKEY 84-07 (Z50J-1600008-|AB27-1000001-1899999)*With Top Bridge H30 Holder or MONKEY Handle Holder required
Show more
RV200 VANVAN -07 NH41A Carburetor *Processing to open switch holes required|* The stock side caps can be used. GSR400 -12 *Ask to drill switch holes|* Normal side caps can be used. GRASS TRACKER Big Boy 09-12 (FI car)*You can use stock side caps. GRASS TRACKER Big Boy -08 (Carburetor)*Drilling of switch holes is required. |*It is necessary to change the throttle cable, clutch cable and brake hose. |*It is necessary to change the direction of the brake banjo. GSX400 05-07 GK7CA *Processing of the switch hole is required|* You can use the normal side cap. ST250 E Type -07 NJ4AA *Requires switch hole drilling|*Side caps can be used as standard. |*You need to change the direction of the brake banjo. ST250 -07 NJ4AA Carburetor *switch hole drilling required|*Side caps can be used with stock. |*You need to change the direction of the brake banjo. GRASS TRACKER 09-12 09-12(FI cars)*Side caps can be used with the stock ones. GRASS TRACKER -08 (Carburetor)*Drilling of switch holes is required. |*It is necessary to change the throttle cable, clutch cable and brake hose. |*It is necessary to change the direction of the brake banjo.
Show more

Product Detail

Specification:

Handlebar Color: Black

[Handlebar Specification]
Handlebar: Steel, Black/Outer Diameter Φ22.2mm/Inner Diameter Φ18mm
It is possible to use STD Cable and Hose.

[Handlebar Size]
Overall Height: 80mm
Overall Width: 645mm
Holder Mounting Part Effective Width: 165mm
Pullback Size: 145mm
Inner Angle: 45-degrees
Anteversion Angle: 120-degrees

[Description]


Made in Japan.Prototype, installation confirmation and mass production are all under in-house management.These handlebars are made with a great deal of care and attention to detail, including careful selection of materials, several types of polishing, engraving of part numbers, high-precision bending and welding, and high-quality surface treatment, based on technology and know-how cultivated over many years in Osaka in Japan.STKM13A steel material with excellent tensile strength is used.Double anti-corrosion treatment by acrylic coating over black chrome plating.

Note



Be sure to click here for more information on the product.
Handlebar Replacement Guide

Caution


*Handlebar clamps (holder or post) in the photo are not included in the product.
*Sizing shown is for a horizontal position.

*Images may contain other colorings and types.

Applicable Models

HORNET250 *Need to drill switch hole APE 50 08-12 (FI Drum Brake) *Processing of switch holes is required APE 50 -07|08 (Carburetor)*APE100 (09-) only APE 100 -12 (drum brake)*APE100 (09-) requires drilling of switch holes. VTR250 03-07 MC33 (1020001-)*Processing of switch hole required|* Required side cap (for 18mm ID) NC700S 12 (except for ABS and DCT cars) *Processing of switch hole is required|* Required side cap (for 18mm diameter) FTR223 (with side numbers) * Requires modification of the clutch cable and choke cable. FTR223 (without side numbers) * Requires modification of the clutch cable and choke cable. CB750 04- RC42 *Processing of switch hole required|* Required side cap (for 18mm ID) CB400SF -98 NC31 *Processing of switch hole required|* Required side cap (for 18mm ID) CB400SS *Requires drilling of switch hole|* Requires side cap (for 18mm diameter) CB1300SUPER BOLDOR 10-12 *Processing of switch holes required|* Required side cap (for 18mm ID) CB1300SUPER BOLDOR 05-09 *Processing of switch hole required|* Required side cap (for 18mm ID) MONKEY 09-12 (AB27-1900001-)(FI)(FI cars)* Requires Top Bridge H30 Holder or MONKEY Handle Holder|* Requires drilling of switch hole MONKEY 84-07 (Z50J-1600008-|AB27-1000001-1899999)*With Top Bridge H30 Holder or MONKEY Handle Holder required
Show more
RV200 VANVAN -07 NH41A Carburetor *Processing to open switch holes required|* The stock side caps can be used. GSR400 -12 *Ask to drill switch holes|* Normal side caps can be used. GRASS TRACKER Big Boy 09-12 (FI car)*You can use stock side caps. GRASS TRACKER Big Boy -08 (Carburetor)*Drilling of switch holes is required. |*It is necessary to change the throttle cable, clutch cable and brake hose. |*It is necessary to change the direction of the brake banjo. GSX400 05-07 GK7CA *Processing of the switch hole is required|* You can use the normal side cap. ST250 E Type -07 NJ4AA *Requires switch hole drilling|*Side caps can be used as standard. |*You need to change the direction of the brake banjo. ST250 -07 NJ4AA Carburetor *switch hole drilling required|*Side caps can be used with stock. |*You need to change the direction of the brake banjo. GRASS TRACKER 09-12 09-12(FI cars)*Side caps can be used with the stock ones. GRASS TRACKER -08 (Carburetor)*Drilling of switch holes is required. |*It is necessary to change the throttle cable, clutch cable and brake hose. |*It is necessary to change the direction of the brake banjo.
Show more
Universal

ALSO VIEWED PRODUCTS

PRODUCT READY TO SHIP

Recommend for You

BEST SELLING

MOST VIEWED PRODUCTS

See all

New Custom Article

See all