Rear Lowdown Link Plate (for NC700X)

30mm different and so - - - It goes down as much.

Extension of FFork is mandatory. People who are not familiar with Machine should not install themselves!

It leads to a heavy Large accident.

I got to run without worrying about strong winds and bad roads. The exercise performance will surely be down as soon as Seat is high. There is no problem if you do not Brown. The bank angle will also be Down so do not sleep too much.

I will exchange it in the Double-end Wrench, but it is easier to remove the Exhaust System first.

It was pretty tightened but Glasses Quantity : It will be off by 2 pc.

It is better to have Center Stand (I can not do it because I am afraid of not being there).

Short Stand uses NC 700 SOEM Product This also adds no problem.

Problem occurrence here Side stands switch does not fit pretty neatly.

If it is impossible to break it certainly, please make sure that it fits snugly into the hole on the Side Stand side and then tighten it.

I spent more than an hour here... STAND tightening Bolt Body and Switch are not united. Since it turns freely, if there is sticking, let's turn it lightly with lubrication Spray etc. before installing it.

Although it is a feeling of use, it can be said that the footsteps are improved considerably or it becomes another Motorcycle (In a bad meaning).

Custom who does not want to do if it can deliver foot even if it feels, but it can not be changed to a sense of security when strong winds at Tandem.

If the protrusion of FFork is with ABS, 20 mm is the limit - - - Brake hose bends considerably....

For the time being, I will try it for a while, but depending on the loading behavior it may be restored.