Blinker Base Set

I used it to attach an external Blinker to a bonsai grom.

It is a plastic lid for a blindfold to say "Hadrill".
I don't know about other car models, but at least on the Grom, the Blinker is fixed to the car body in such a way that the Plate is sandwiched between the Plate from the inside and outside.
Groms are spec. with Plate/BlinkerBody on the inside/outside for Front and Washer/Plate on the inside/outside for Rear.
Therefore, this product itself needs to be used as a Base, especially since there will be no Base for the Front to pinch when using an external Blinker.
In addition, the Front has a protrusion on the inner plate, which is too thick to be inserted as it is, leaving a gap on the outer side...
I couldn't use the front plate with the M10 blinker bolt as it is, so I cut off the protrusion a little and hollowed out the center of the plate.
When installing, the front was just tight enough with M10, and I was able to insert it while turning it in the manner of a screw.
（The work was more difficult than expected because we had to sandwich a considerable number of parts (outside) this product - car body - (inside) processed base - washer - bolt, and fix the bolt in a small workspace.
However, thanks to this, we were able to install the system in a way that the two apparent holes were well concealed.
If you need Plate for fixing, this product would require a separate Gold product for fixing.
Considering it is only a plastic lid for blindfold, it is cosmetic and looks good, so I am personally satisfied with it.

2003 (PC37 first semester) It is used to turn on a fine LED blinker on the
If you remove the big blinker of OEM, you can make a space in the mount part, so I installed this.
The Gap is not included in the list of compatible cars, so I thought the Gap of many lives is acceptable.
Installed so that the Cowl is sandwiched between the Front side and Reverse side... However, the reverse side (Inside) is better to use the Parts that were used for OEM.
There is a Level error that you might notice if you see it up close, but I think it's useful enough.

I installed it on REBEL250 to replace KIJIMA's Blinker
If you want to replace the blinker with an external blinker, you will need a blinker base for HONDA Because it will be
I'm glad that the price was low