It prevents the high-flash symptom that happens when you change the blinkers to LED.
The current range is wide and can be used with halogen bulbs.
Please check the compatibility of the relay before considering.
*Choose the shape from "3-pin", "3-pin special", or "2-pin".
The "3-pin special" type has a different terminal arrangement from the normal 3-pin type.
ZEPHYR and ZRX are compatible with stock 3 pins.
Sufficient performance29 Oct 2020
I bought this to coincide with the conversion of Blinker Valve to LED.
It installed without any problems.
The operation is stable after installation and I am glad I bought it.
The old fashioned Pushing Pushing Pushing sound was a surprise!
Cospar good20 Dec 2018
It is installed in CHALY that has been converted to 12V. blinker is not LED but 10WFilament front and rear The blinking interval is stable because there are only 3 poles, and the switch is ON! There is no problem at all in function
There is no HangerRubber, so depending on the car model, you may need to work on fixing it to the car body
exchange01 Jul 2023
I was using Blinker by replacing it with LED, but it seems that it sometimes does not blink due to vibration, so I replaced Relay with a new one.
The price was not that much, and after the replacement, it blinked without any problem, which was helpful.
I changed the blinker relay because I changed the blinker to LED and it became a high flasher.25 Aug 2022
Blinker relay is also compatible with ZEPHYR1100.View detail
VT250F (MC15) High flasher prevention25 Oct 2021
I've been using a high flasher for about a year, but I changed it while I was at it.
Relay is located on the back side of Battery.
The conversion kit is troublesome to find, so I'm Wiring by myself.
Plain Type Terminal, Branch Connector, Wire, Vinite and Tie Band are required.
There is no High flasher on the Meter, and the Relay sound is not heard in the Engine sound.