![GASKET CLUTCH [0934-4002] - Webike Indonesia](https://img.webike-cdn.net/s420/catalogue/images/42975/36FEBB6D-458F-452C-9BE5-37EBD71742B1.jpg "GASKET CLUTCH [0934-4002] - Webike Indonesia")
![GASKET CLUTCH [0934-4002] - Webike Indonesia](https://img.webike-cdn.net/s52/catalogue/images/42975/36FEBB6D-458F-452C-9BE5-37EBD71742B1.jpg "GASKET CLUTCH [0934-4002] - Webike Indonesia")
Check my coupons
Product Detail
Specification:
MADE IN THE U.S.A:Yes
MATERIAL:AFM
PACKAGING:Each
SPECIFIC APPLICATION:Yes
STYLE:OEM Replacement
TYPE:Clutch Cover Gasket
MATERIAL:AFM
PACKAGING:Each
SPECIFIC APPLICATION:Yes
STYLE:OEM Replacement
TYPE:Clutch Cover Gasket
[Description]
・Gaskets and gasket sets used by professionals in high-performance machines and as OE replacements worldwide
・Materials may vary depending on what is correct and engineered for the specified application
・Each PART # contains the proper amount of gaskets for one application
・Made in U.S.A.
HEAD AND BASE GASKETS
・Sold each
・Quality materials developed for maximum performance tolerances and longevity; available in several thicknesses and materials
・Outer layers are embossed and coated on both sides with Viton to meet the demands of a variety of harsh sealing environments, load conditions, and surface finishes finishes
・Center or shim layer is uncoated stainless steel, which can be varied to accommodate multiple thickness requirements
・MLS (Mutli-Layer Steel) head gaskets promote an even torque load across the gasket sealing surface utilizing LCE (Load Control Embossments), providing less bore distortion and better piston ring seal for more power. providing less bore distortion and better piston ring seal for more power
・Made in U.S.A.
TOP END GASKET KITS
・Contains all gaskets needed to properly seal the top end
・Enough for one application
・Includes correct head, base, exhaust, cam chain tensioner and valve seal gaskets
・Made in U.S.A.
LOWER END KITS
・Contains all gaskets and seals needed
・Made in U.S.A.
STATOR AND CLUTCH COVER GASKETS
・No gasket sealants or silicon bead is required, re-torque is also not required
・AFM is a compounded nitrile synthetic rubber bonded to an aluminum core with a high temperature resistance of more than 250°F; It has an 85% recovery while maintaining a strong torque retention
・Made from AFM material for longevity
・Made in U.S.A.
・Sold each
VALVE COVER GASKETS
・Sold each
・Made in U.S.A.
・Made from AFM or thick fiber material depending on application
EXHAUST GASKETS
・Made in U.S.A.
・Exhaust gaskets are made for extreme temperatures
・Sold as a set per application
SHIFT SHAFT AND COUNTERSHAFT SPROCKET SEAL KITS
・High-quality seals allow for proper sealing of common leaks
・Recommended to replace the countershaft sprocket seal when servicing / replacing the countershaft sprocket
・Made of quality materials developed for maximum performance tolerances and longevity
・Made in U.S.A.
・Sold each
・Materials may vary depending on what is correct and engineered for the specified application
・Each PART # contains the proper amount of gaskets for one application
・Made in U.S.A.
HEAD AND BASE GASKETS
・Sold each
・Quality materials developed for maximum performance tolerances and longevity; available in several thicknesses and materials
・Outer layers are embossed and coated on both sides with Viton to meet the demands of a variety of harsh sealing environments, load conditions, and surface finishes finishes
・Center or shim layer is uncoated stainless steel, which can be varied to accommodate multiple thickness requirements
・MLS (Mutli-Layer Steel) head gaskets promote an even torque load across the gasket sealing surface utilizing LCE (Load Control Embossments), providing less bore distortion and better piston ring seal for more power. providing less bore distortion and better piston ring seal for more power
・Made in U.S.A.
TOP END GASKET KITS
・Contains all gaskets needed to properly seal the top end
・Enough for one application
・Includes correct head, base, exhaust, cam chain tensioner and valve seal gaskets
・Made in U.S.A.
LOWER END KITS
・Contains all gaskets and seals needed
・Made in U.S.A.
STATOR AND CLUTCH COVER GASKETS
・No gasket sealants or silicon bead is required, re-torque is also not required
・AFM is a compounded nitrile synthetic rubber bonded to an aluminum core with a high temperature resistance of more than 250°F; It has an 85% recovery while maintaining a strong torque retention
・Made from AFM material for longevity
・Made in U.S.A.
・Sold each
VALVE COVER GASKETS
・Sold each
・Made in U.S.A.
・Made from AFM or thick fiber material depending on application
EXHAUST GASKETS
・Made in U.S.A.
・Exhaust gaskets are made for extreme temperatures
・Sold as a set per application
SHIFT SHAFT AND COUNTERSHAFT SPROCKET SEAL KITS
・High-quality seals allow for proper sealing of common leaks
・Recommended to replace the countershaft sprocket seal when servicing / replacing the countershaft sprocket
・Made of quality materials developed for maximum performance tolerances and longevity
・Made in U.S.A.
・Sold each
Caution
*The instruction manual is in English.
*Delivery may be delayed due to importing.
*Delivery may be delayed due to importing.
![GASKET CLUTCH [0934-4002] - Webike Indonesia](https://img.webike-cdn.net/catalogue/images/42975/36FEBB6D-458F-452C-9BE5-37EBD71742B1.jpg "GASKET CLUTCH [0934-4002] - Webike Indonesia")