Aluminum Swing Arm Hook Bolt
Brand: J Trip
It is necessary for maintenance
Used in J-TRIPSTAND
Tire exchange, Chain restraint etc etc. It is necessary to use Tire warmer in Circuit and Tire Check from light maintenance of.
I am satisfied with strength as well as color type Design.
Aluminum Billet Adjustable Lever Set
This is a nice thing!
Although z250sl was not described in conforming MODEL, as for Review, it was that it was possible to install NINJA 2 Helmet 50Rsl rider's pillar big brother, so I bought it. The sense of ownership has increased considerably well in both texture and detail!
She said that she was already floating from release paper at the time it reached home. - - - -
When we arrived, it was already floating from release paper.
It seemed that the adhesive strength was not 0 and the season was still hot, so I tried adhering to Tank in the meantime and then it will float after a while.
As another means, by holding down from above for a long time, I hope that the shape of Pad itself will become familiar with Tank, I will keep curing Tape from above and keep it familiar 2 months.
I thought that it would have become familiar with it and seemed to be sticking somewhat when removing the curing tape.
But. It floated on the next day.
If you leave it like this, you will scratch the painting of Tank if you get in dust, so you only have to peel off.
It is mere Large loss.
Rear Brake Clevis
Self-satisfied, but noticeable.
Purchased for weight saving, weight-saving as much as 7 Gram even using Titanium nut, Crevice Body is light with Cut-out Aluminum Alloy, but Pin is light material : I do not know if there is any way for Stainless Steel, I will make TitaniumPin..
Do not use the supplied Cotter pin, slip out Snap pin attaching importance to workability with reverse side mounted,
The look which I did not expect so much, is Aluminum Cut - out feeling pretty good, satisfied?
Because the operation feeling is also little play of Pin, because of the rigidity of Stainless pin, it changes quite a bit, Direct feeling more highly rigid than NORMAL.
Although I purchased for NINJA 400 R this time, because it is a common part with KSR? It is not attached to Manufacturer's correspondence MODEL, but for reference.
FLO Oil Filter (Filter Replacement Type)
Brand: PC RACING
Very good thing.
I was able to use the product repeatedly over and over so I bought it for a car I'd like to ride yet.
I am sorry that there is no attached image,
Of course you can attach it with a pon.
Oil Although it does not understand the degree of effect because it is simultaneous, since it is pretty eye-sounding Mesh and magnet built-in, it seems to pick up Garbage considerably and I am looking forward to the next Oil exchange.
It seems that the role like Oil cooler is also true, I ran the national highway for about two hours during the day, but the fan was able to run comfortably almost without turning.
PROTECH Universal sequential LED-indicator RC-40
Make good details with good shape
Neck is expensive.
Wiring does not know Plus, Minus LED does not flow if connected reverse. Do not light. Blinker relay is OK for normal LED
Since connection terminals are small, confirmation is necessary when connecting
With installation Screw 8 mm, it can be installed anything, it seems that it is made by EC standard and it enters EMark. With mark
Connection CouplerWire Set (Other Company Product) Can be populated with, or disconnected from the Line. (MT−09) in the case of
Magnetic Drain Bolt
Attach to the Universal Product only carefully!
I installed it in the new CBR 250 RR. There is no problem with Length and Pitch, but the root of Drain bolt (Washer contact surface) Is thinner than the inner diameter of Washer, so attention is required for installation. It is a product that leaks Oil if you do not loosen the Drain bolt while holding down the Washer and doing the center picking out. There is no problem if you observe the shape before mounting and understand the shape.
Grip Star Tank Pad
Excellent Grip feeling
As for the owned Z250 Matte painting, because of Mr. knee grip Tank 's expertise is concerned and it became this commodity as a result of thinking whether there is something good, choosing the type of conference in case of town riding & touring being the subject I got a reasonable Cushion and Grip feel just right.
By the way, Z250 does not do Hit with this TECSpecifications product search, Hit it when searching overseas MODEL's NINJA 300 !! Of course it can also be used for NINJA 2 Helmet50R.