120 Produk

Produk Terbaru

Produk Rekomendasi

Merek Top

Ulasan Produk

J

Extreme Grip PCG-039

3 oleh Japan User(translated)

Brand: ALCAN hands

It chose by appearance.
A portion black when grasping is collapse.

It chose by appearance.
A portion black when grasping is collapse.

【ALCAN hands】Extreme Grip PCG-039desktop_pages_mt_index..product_reviews

J

Stem Seal Set

3 oleh Japan User(translated)

Brand: CF POSH

Since it was cheap, it purchased in passing at the time of bore up.
Sealing also becomes brave.

Since it was cheap, it purchased in passing at the time of bore up.
Sealing also becomes brave.

【CF POSH】Stem Seal Setdesktop_pages_mt_index..product_reviews

J

Limiter Cut Camshaft (for STD Head Corresponding Big Bore Kit) for 75cc with Valve Spring

4 oleh Japan User(translated)

Brand: DAYTONA

It was used for the monkey of normal (49 cc).
Although changed from the high cam of JUN, it says clearly and Power is comple...

It was used for the monkey of normal (49 cc).
Although changed from the high cam of JUN, it says clearly and Power is completely different! Although it is natural, that Power of the high rotation area went up also has the torque in an inside rotation region rather than a JUN cam, and it rides easily by a torque fully.
of course, the maximum high speed is also extended!!! being related with setting of a carburetor -- the time of the influence of important effectiveness, or a JUN cam -- # -- it fell about by ten.
In attaching, it was a little troublesome that valve recess processing of the piston had to be carried out for reservation of valve clearance, but Power who wipes out the difficulties was obtained ^^

【DAYTONA】Limiter Cut Camshaft (for STD Head Corresponding Big Bore Kit) for 75cc with Valve Springdesktop_pages_mt_index..product_reviews

J

Power Rev Conversion Harness

5 oleh Japan User(translated)

Brand: KITACO

It could come to attach a power rev to the dax, and is very much satisfied.

It could come to attach a power rev to the dax, and is very much satisfied.

【KITACO】Power Rev Conversion Harnessdesktop_pages_mt_index..product_reviews

J

75cc LIGHT Bore Up Kit

4 oleh Japan User(translated)

Brand: KITACO

It is better to be purchased after checking conformity well since a cub changes the form of the piston of a bore up kit by a mod...

It is better to be purchased after checking conformity well since a cub changes the form of the piston of a bore up kit by a model.
Wearing is very easy and a special tool in particular does not need it, either.
It can work, even if a description is also polite and it does not take down an engine.
And after carrying out bore up, it ran about 300 km, but so so, there is also torque and it is easy to run it.
When bore up was carried out, the piston became heavy, and since the maximum high speed did not come out of whether high rotation comes to be hard in the surroundings from the time of 50 cc by a pure sprocket, F sprocket was made into 16 dishes.
however -- still -- the maximum high speed -- 70 km/h -- just for a moment .
A high cam may also be needed if bore up is carried out.
But surely torque becomes strong and bolt-on is opened wide from two-step right-turn and 30-km/h regulation by registering two sorts.
Although the goods themselves were very good, since 笆ウ mark attached to the rear fender which will follow if you buy the bore up kit of the manufacturer of the other company was not attached, they are four stars.
In the direction which has ridden on a 50-cc cub by Ho who usually has license of two or more flowers, it is recommended by all means.

【KITACO】75cc LIGHT Bore Up Kitdesktop_pages_mt_index..product_reviews

J

75cc LIGHT Bore Up Kit

4 oleh Japan User(translated)

Brand: KITACO

It is better to be purchased after checking conformity well since a cub changes the form of the piston of a bore up kit by a mod...

It is better to be purchased after checking conformity well since a cub changes the form of the piston of a bore up kit by a model.
Wearing is very easy and a special tool in particular does not need it, either.
It can work, even if a description is also polite and it does not take down an engine.
And after carrying out bore up, it ran about 300 km, but so so, there is also torque and it is easy to run it.
When bore up was carried out, the piston became heavy, and since the maximum high speed did not come out of whether high rotation comes to be hard in the surroundings from the time of 50 cc by a pure sprocket, F sprocket was made into 16 dishes.
however -- still -- the maximum high speed -- 70 km/h -- just for a moment .
A high cam may also be needed if bore up is carried out.
But surely torque becomes strong and bolt-on is opened wide from two-step right-turn and 30-km/h regulation by registering two sorts.
Although the goods themselves were very good, since 笆ウ mark attached to the rear fender which will follow if you buy the bore up kit of the manufacturer of the other company was not attached, they are four stars.
In the direction which has ridden on a 50-cc cub by Ho who usually has license of two or more flowers, it is recommended by all means.

【KITACO】75cc LIGHT Bore Up Kitdesktop_pages_mt_index..product_reviews

N

Main Jet [KEIHIN All Screw Type/Large]

5 oleh NO NAME

Brand: KITACO

jrt

this is only for one jet it fitts the honda today perfectly i noticed that the numbers were the same as the original but may have been changerd before non the less you need this for the 80cc bigbore

【KITACO】Main Jet [KEIHIN All Screw Type/Large]desktop_pages_mt_index..product_reviews

P

Aluminum Cut-out Clutch Cover

5 oleh Peter Suele

Brand: SP Takegawa: SP Takegawa

Clutch cover

I purchased this clutch cover. I'm very pleased with it.Made of solid aluminium and has nice shape. The anodized color of blue fit the rest of My parts. I recommend this component with a relaxed heart every Monkeybike owner.

【SP Takegawa: SP Takegawa】Aluminum Cut-out Clutch Coverdesktop_pages_mt_index..product_reviews