Kembali ke atas

It chose by appearance.
A portion black when grasping is collapse.

It exchanged together at the time of brake lever exchange.
I was easy to grasp lever form and thought that texture was also good considering a price.
A point regrettable [ one ] has GATA in a pivot part compared with a pure lever.
Operation does not seem to be affected.

It is always putting in under the sheet for the emergencies at the time of touring.
Although he does not want to encounter the opportunity for this to play an active part ...

It attaches above all and safe.
This No. 1

Off Car Exterior Replace with Cowl's H4 Bulb.

Off There is almost no Space behind Light if there is a car, buying this product because the fan on the Connector side does not fit well.
When I looked at the LED from the front, I was worried that the light would go forward ahead, but it was dazzling when I saw it from the front after installation.
Although it was said that the head was not rigidly attached by the other person's review, it was able to be installed without problems.

It is unknown how bright it is because I do not run at night, but I am expecting Large as I was not flickering at Idling like Mr. Halogen.
And how long is the life span.

HELLO I'M SATISFIED OF THIS PRODUCT. SO I NOTICED AROUND 5000 RPM ,THE ENGINE SEEMS LIKE TO HAVE BLOWS. AS IS AN RACING PLUG YOU HAVE TO MAINTAIN A CERTAIN POWER FOR AVOIDING BLOWS.UP 5000 RPM YOU HAVE GOOD SENSATIONS.

We use it for Initial Model VTR. In the winter, I could not afford to catch Chalk, but I feel that the stability has been improved remarkably! Since only two months have passed since I exchanged it, I am not sure about Cospa and exhaustion However, I receive the impression that it is comparable to that just after I replaced it for the moment. I like the extent that it will probably be Windshield IRIDIUM for the next exchange as well

ROYALSTAR1300 (VXZ13AT) I tried to equip it. I feel brighter than before, but since I have not traveled at night, I write the comments next time.

Although the same Besla 's Resin pad was installed close to a new article with almost no decrease, Fei Ring was bad for anything, and at the beginning Caliper and OEMMASTER pushed one after the other though I thought it was such a thing,
Even if Atari is not working as a trial, both braking performance and fee Ring have been upgraded to Large width. Dust is also less than Resin.

It is a Manufacturer that has a track record at Race in own production and can be trusted, so if you do run like a Sports run or a load as it is, it is a Recommendation.

yeah i though , i bought the long version, instead they sent me the sort version.. the material is solid , the price is affordable.. , in general i like it.

I used this for CB 750 RC 42, Lever liked Black. It used to be a Korea made BlackLever, but I like it because it is glossy here. It is Exactly to RC 42 and there is no astringentness The operation feeling is very good

Mounting on NS-1.

The same thing as this was attached when purchasing Motorcycle, but since Cable was disconnected, it was replaced.
Anyway Cable is thin! This is the most dissatisfied point.
I want to pay attention to breaking and pulling.

Since it can not turn off the power, the battery will run out quickly with keeping on.
As a matter of fact, replacing the battery is somewhat troublesome.

As a water temperature gauge, it is a cheap class, so it is recommended for people who place importance on COSPA, those who hand out the water temperature gauge for the first time.
Let's buy a high-grade water temperature gauge a little if there is gold and knowledge.

It is my first exchange since I got on a new car. I am amazed by NORMALPad with about 30,000 km. Because I attached Red Pad with a different Motorcycle, I decided without comparing with others in particular. I feel that NORMAL's Rotor is bad, but it seems to be bad, but the credibility is better than NORMAL. I do not know Cost performance yet

It often takes a fingertip, it is very easy to handle.
Processing by ponding is absolutely nothing.
(^^) I will also upload photos of Clutch lever.

Even when it is exchanged from OEM, there is almost no sense of incongruity in use and design.
Moreover, since the fingertip grips firmly, it does not slip and fingers slip off almost.
Because the Lever holder is Black, I got a feeling of cohesiveness and made it Black and it was the correct answer.

'