Mounting on NS-1.
The same thing as this was attached when purchasing Motorcycle, but since Cable was disconnected, it was replaced.
Anyway Cable is thin! This is the most dissatisfied point.
I want to pay attention to breaking and pulling.
Since it can not turn off the power, the battery will run out quickly with keeping on.
As a matter of fact, replacing the battery is somewhat troublesome.
As a water temperature gauge, it is a cheap class, so it is recommended for people who place importance on COSPA, those who hand out the water temperature gauge for the first time.
Let's buy a high-grade water temperature gauge a little if there is gold and knowledge.
Plus side : Price is cheap, around (grip) Soft, I think that it is good not to get stiff even in cold weather, individuals with many vibrations.
Minus surface : Grip becomes thick (About Grip heater included) So, for those who are Small in hands, depending on the angle of Handlebar, the thickness increases, Lever and Handlebar (Core of) There is a possibility that the thing may feel distant and it may be difficult to walk around so I think that the evaluation will break up.
Because my FUSION can not adjust the angle for Normal handle, I felt it slightly upward more than to Upright (Feeling holding down from above) became.
Because it is a Scooter which does not hold down even Positionally, the difference of several millimeters is sensuously pretty much Large.
Recommended for those who can adjust Handle position based on the thickness of Grip.
On the other hand, Direct feeling of Handlebar becomes thin, so I feel dull when I turn around.
This is terrible.
Because everyone bought the performance, it would be Large sturdy, but I never used it even when I replaced the battery.
Since the spare battery was attached, it was unpleasant to change the battery immediately on the way in the middle of using it, so when I first exchanged it, the lid was broken in a moment, and even though I was careful when inserting the battery, the terminal breakage Finished with.
If it is a prototype, I think that it is a bad Level if I sell this durability by mass production.
I got angry with industrial products after a long absence.
เป็นปลอกแฮนด์ที่สวยมาก เนื้อวัสดุที่มีคุณภาพ การออกแบบที่ดี ขั้นตอนในการใส่เพียง 1-2 ขั้นตอนก็เรียบร้อย เหมาะกับการใช้งานที่หลากหลายทั้งทางใกล้และการเดินทางไกล ช่วยลดการสั่นสะเทือนในขณะขับขี่ กระชับเวลาเร่งคันเร่ง และสามารถทนต่อฝุ่นและน้ำโดยไม่ลื่นและเสื่อมสภาพ ผมใช้ในการเดินทางมากกว่า 500 กม ในครั้งเดียว และจะใช้ในการเดินทางไกลต่อไป It is a very handsome casing. Quality material Good design Step in just 1-2 steps to complete. Suitable for a wide range of applications both near and far. Reduces vibration while driving. Accelerated accelerator accelerator And can withstand dust and water without slipping and wear. I used to travel more than 500 km at one time and it is used to travel further. (translated by Google Translator)
I thought about making OEMMaster cylinder OH, but I bought it because it was cheap. The reason for using Semi-radial master is Radial, zrx 1100's Accelerator Wire comes down, so it interferes, so we have to buy High Solo and a thin Switch. Other people have also written, but since the Wiring of the Brake switch does not reach, it has to be extended. Tank was more expensive than I thought and the lid of Tank was stopped with two Screws.
Actually, I wanted to attach Radial master, but ZX - 6R (2001 year) I was able to put on, ZX - 9R (1999 formula) I gave up thinking that we needed substantial processing, but I was feeling frustrated with Normal master. I thought what Semi-radial would be like, but I bought it by multiplying Sale's Campaign. I was able to put on as expected. Since Caliper also changed to brembo at the same time, it may not be an impression only for this item, but it was tightly about that it would not compare with Normal master. Although the department is bad compared to Rapon, I could relax with confidence from Okayama International Circuit's HomeStraight to 1 Corner. If you can not satisfy with NORMAL though it was troublesome processing, please try it once. I think that the effect beyond price will surely be felt.
I bought these pads for my Honda Clubman GB400. There're works well in terms of solid brake feel, good performance, and lower dust compare with original pad. ผ้าเบรคชั้นดี ราคาไม่แพงเมื่อเทียบกับคุณภาพ จากที่ได้ลองเปลี่ยนมาใช้ผ้าเบรคเป็นตัวแรก รู้สึกชอบมาก แนะนำเนื่องจากว่าเบรคได้สนิท รู้ให้ความมั่นใจ นุ่ม ไม่มีเสียงรบกวน เมื่อเทียบกับของติดรถจะรู้สึกแตกต่างกันอย่างเห็นได้ชัด ที่สำคัญสวยสีเด่นมาก (translated by Google Translator) I bought these pads for my Honda Clubman GB400. There're works well in terms of solid brake feel, good performance, and lower dust compare with original pad. Good brake pads Affordable compared to quality From the first try to change the brake pads feel like a lot of advice because the brakes are tight. Confident, soft, no noise. Compared to the car's feel will vary significantly. Very beautiful color.