Kembali ke atas

barang TOP banget ....plug & play ....kualitas cnc bagus

Off Car Exterior Replace with Cowl's H4 Bulb.

Off There is almost no Space behind Light if there is a car, buying this product because the fan on the Connector side does not fit well.
When I looked at the LED from the front, I was worried that the light would go forward ahead, but it was dazzling when I saw it from the front after installation.
Although it was said that the head was not rigidly attached by the other person's review, it was able to be installed without problems.

It is unknown how bright it is because I do not run at night, but I am expecting Large as I was not flickering at Idling like Mr. Halogen.
And how long is the life span.

ROYALSTAR1300 (VXZ13AT) I tried to equip it. I feel brighter than before, but since I have not traveled at night, I write the comments next time.

Plug is changing in 2 to 3 years even if it is not in good condition unless it is irritable or high endurance. Indeed it is a start condition, from Idling to Red zone I ride well.

เป็นอุปกรณ์ที่ออกแบบได้สวยงาม ทั้งวัสดุและสีสัน สามารถติดตั้งได้งานด้วยตัวเองในเวลาอันสั้น และสามารถใช้ได้กับรถหลายรุ่น โดนแสดงแอกถึงประสิทธิภาพอย่างชัดเจน ทั้งการติดเครื่องยนต์ที่ง่ายขึ้น การขับขี่ทางไกลด้วยกำลังเครื่องยนต์ที่ดีขึ้นอย่างเห็นได้ชัด และการครอบของหัวเทียนมีความแน่น สามารถป้องกันน้ำหรือผุ่นละอองได้เป็นอย่างดี It is a beautifully designed device. Materials and colors Can be installed manually in a short time. And it can be used on many models. Show the yoke to clear performance. The engine is easier. Long-distance driving with noticeably improved engine power. And the cover of the spark plug. Water resistant or dustproof. (Translated by google translation)

yeah i though , i bought the long version, instead they sent me the sort version.. the material is solid , the price is affordable.. , in general i like it.

I have heard the reputation of this Plug, but I tried buying it to be handled by Webike.
So far as Watani's designation OEM DPR Gap 1. I adjusted it to 3 mm and used it. Ignition system and lighting and fans (Cause of voltage eating) And is completely processing Wiring is divided.
Even when I changed Igniter and Coil "Beauty is on fire" Although I was impressed with this, I will go further up when I put this in. The cloudy rush of about 5000 rpm from Clutch meat is like Silky, it seems that generations have gone lightly for about 10 years. I feel that my heart or exhaust smell has also decreased (Lol)
However, it is said that the introduction of Wotani SPll is the Large premise as minimum as Mr. Shimaba says from the import distributor. Horribly Gap is wide so fire will not fly in the same Coil.
If the fans turn around due to heavy traffic in the summer, there are many misfires → JR 8C installed, but ... If you want to enjoy drastic solutions and fine Feel, I recommend this combination.

Discovering the Spark plug that looks like the face on the product explanation screen of Wa Big who happens to be found. Regarding its use, this plug which encourages watani attachment to the ignition system. The purchase decided immediately for a car that meets the conditions! When looking at the real thing, Steel color which Blue took first gets an eye out. The center electrode of the tapping was NGK - Compared to DR8EA, it will be positioned more towards the center of the combustion chamber by 1 mm or more, which will increase expectations for combustion efficiency Up. However, looking at the details, I can not deny the feeling that it is more complicated to make than JAPAN's Plug. BALI of the center electrode and screw terminal type terminal are obviously off center. , I feel a little cheapness because I am watching JAPAN items with high precision from the usual. However, if you actually use it and have sufficient performance and durability, you can say that it is not necessary to request such parts that are not normally visible. I installed it immediately, but the exchange itself is exactly the same as regular Plug exchange and there is no particular problem. The accuracy of the Screw part seems to be a passing point. When I try to cover Plug cap, it is Fashion that Blue 's Steel color looks sharp. And Engine start! - - - That sounds exhaust sound from Mild something more than usual. Because it is a single cylinder, there is a place called Dododo, but it is called Toto. However, rather than being cheesy rather than luxurious - - -. Also, the warm exhaust gas Gas in the winter season has Gas smell, but it feels like it has been relaxed. Impression that Engine braking became Mild when I actually ran. I have stopped playing. Furthermore, Engine vibration seems to be decreasing. Since Cowl was wearing, engine oscillation was swaying the edge of Cowl, as it was Big Li after replacing the Plug, it became impossible to see it. It is feeling that the rise is also powerful though it is Mild. I am surprised that there is such a change with just one Plug. I ran about 20 kilometers, but I did not feel Minus factor. I would like to see the impact on fuel economy and the durability of the plug itself. It is limited to strong motorcycle of watani equipped car or ignition system, but it is recommended plug at the first impression.

This is the second time we are wearing it, but it will start with Cell one shot. (It is natural because it is a new item) The engine is bad for a while and lastly
It was released from trouble because Starter was not used until it was not used. Opportunities to ride will also increase. After replacing the last Plug
I used it for 4 years. I will change it frequently this time.

I took 11,500? This time and replaced it for the first Iridium plugs.

I removed the Seat, lifted the tank and worked, but it took around 20 minutes.
After installing the Plug, when I hung the Engine, Idling was first stable. When I ran it I could actually feel that the rushing up was so different with Smooth. Because it is just a new Plug, it may have felt so - - !

As soon as GB 250 CLUBMAN travel distance is 50000 ?, it purchased and ran well for 29 years.

It is enough just as usual to use Motorcycle, so it is just as adequate as attached to Manufacturer's shipment.


I tried windshield IRIDIUM and so on in the past but I am insensitive, so it seems like it has some effect "Qi" I only did it. Of course it should be different from durability, but I am also looking forward to Plug replacement.

It is difficult to judge the filtration function of Oil Filter by eye observation ...
Because the price is also cheap, I think that it is good to exchange every Oil exchange! Because it is better to do than not do it.

There is also an LED Lamp with a device for heat dissipation behind Valve, but there are cases where it can not fit in the Headlight case eventually, but since the back of Valve does not protrude, Valve will be in Beauty To fit in.

The grip of the Pro grip that I used so far came a lot, so if I order an exchange I will not come back to what the end of the year (T д T)

Up to now Grip used only Pro grip, but it was also mandatory for Pierced Type (Hand guard is for Bar Open End) , The other Manufacturer gave up despite the good Design even crying.

... thought that this is the case, I decided to avoid purchasing GripCutter at the same time and purchase the Closed End who wanted to use it more than before.

Ultimately, as Progrip gets tired of, RENTHAL 's PillowGrip or KEVLAR Grip and Domino' s Cross grip and hesitation, ultimately the color (Lol) Determined by ... Blue so (^_^;)

However, domino 's Cross grip seems to have a good reputation among others, which I also purchased, but I felt relieved when I saw the real thing (Lol).

Before that, regarding the installation, first of all Closed End 's Grip, so we purchased a GripCutter (Scheduled to be reviewed separately) Penetrating completed with a hole with cucumber using.

After that, remove the Grip to be removed from the Handlebar by spraying the Parts Cleaner and push the Grip which opened the hole and push the Parts cleaner onto the Grip again to install it.

If it is not easy to attach, including hand guard removal, the work will be about 30 minutes.

I do not like glue or Wiring, but it will hinder operation in the past etc etc. There was no problem, so I can not say it unconditionally, but I judge it as Large sturdy.

After completing the installation, I ran near the field immediately, but I felt that I absorbed the vibration well with a soft feeling than the earthquake-resistant Gel of the previous Pro grip.

However, since it is also Large thing after all, it is satisfied only with Large.

It seems short in durability, but I like it, so I think I will repeat it again.

Oh, I'd like to try using KEVLAR Grip, but it's after all Design or Large thing (Lol).

I used it for VFR 1000F.
Up until now Honda OEM
Length is Large, as you aligned with the old one removed before installation!
If you hit Under Cowl, there is a possibility that Cowl will not stick - -
I already opened the package and painted O-ring up to Oil and realized that I installed it as it is.
The result was Size that does not hit Cowl.
Large capacity, the capacity is big Lee = the capacity to filter out will also be large.
I could use it normally.

'