Kembali ke atas

It exchanged together at the time of brake lever exchange.
I was easy to grasp lever form and thought that texture was also good considering a price.
A point regrettable [ one ] has GATA in a pivot part compared with a pure lever.
Operation does not seem to be affected.

Plug is changing in 2 to 3 years even if it is not in good condition unless it is irritable or high endurance. Indeed it is a start condition, from Idling to Red zone I ride well.

Although the same Besla 's Resin pad was installed close to a new article with almost no decrease, Fei Ring was bad for anything, and at the beginning Caliper and OEMMASTER pushed one after the other though I thought it was such a thing,
Even if Atari is not working as a trial, both braking performance and fee Ring have been upgraded to Large width. Dust is also less than Resin.

It is a Manufacturer that has a track record at Race in own production and can be trusted, so if you do run like a Sports run or a load as it is, it is a Recommendation.

I used this for CB 750 RC 42, Lever liked Black. It used to be a Korea made BlackLever, but I like it because it is glossy here. It is Exactly to RC 42 and there is no astringentness The operation feeling is very good

I have heard the reputation of this Plug, but I tried buying it to be handled by Webike.
So far as Watani's designation OEM DPR Gap 1. I adjusted it to 3 mm and used it. Ignition system and lighting and fans (Cause of voltage eating) And is completely processing Wiring is divided.
Even when I changed Igniter and Coil "Beauty is on fire" Although I was impressed with this, I will go further up when I put this in. The cloudy rush of about 5000 rpm from Clutch meat is like Silky, it seems that generations have gone lightly for about 10 years. I feel that my heart or exhaust smell has also decreased (Lol)
However, it is said that the introduction of Wotani SPll is the Large premise as minimum as Mr. Shimaba says from the import distributor. Horribly Gap is wide so fire will not fly in the same Coil.
If the fans turn around due to heavy traffic in the summer, there are many misfires → JR 8C installed, but ... If you want to enjoy drastic solutions and fine Feel, I recommend this combination.

It often takes a fingertip, it is very easy to handle.
Processing by ponding is absolutely nothing.
(^^) I will also upload photos of Clutch lever.

Discovering the Spark plug that looks like the face on the product explanation screen of Wa Big who happens to be found. Regarding its use, this plug which encourages watani attachment to the ignition system. The purchase decided immediately for a car that meets the conditions! When looking at the real thing, Steel color which Blue took first gets an eye out. The center electrode of the tapping was NGK - Compared to DR8EA, it will be positioned more towards the center of the combustion chamber by 1 mm or more, which will increase expectations for combustion efficiency Up. However, looking at the details, I can not deny the feeling that it is more complicated to make than JAPAN's Plug. BALI of the center electrode and screw terminal type terminal are obviously off center. , I feel a little cheapness because I am watching JAPAN items with high precision from the usual. However, if you actually use it and have sufficient performance and durability, you can say that it is not necessary to request such parts that are not normally visible. I installed it immediately, but the exchange itself is exactly the same as regular Plug exchange and there is no particular problem. The accuracy of the Screw part seems to be a passing point. When I try to cover Plug cap, it is Fashion that Blue 's Steel color looks sharp. And Engine start! - - - That sounds exhaust sound from Mild something more than usual. Because it is a single cylinder, there is a place called Dododo, but it is called Toto. However, rather than being cheesy rather than luxurious - - -. Also, the warm exhaust gas Gas in the winter season has Gas smell, but it feels like it has been relaxed. Impression that Engine braking became Mild when I actually ran. I have stopped playing. Furthermore, Engine vibration seems to be decreasing. Since Cowl was wearing, engine oscillation was swaying the edge of Cowl, as it was Big Li after replacing the Plug, it became impossible to see it. It is feeling that the rise is also powerful though it is Mild. I am surprised that there is such a change with just one Plug. I ran about 20 kilometers, but I did not feel Minus factor. I would like to see the impact on fuel economy and the durability of the plug itself. It is limited to strong motorcycle of watani equipped car or ignition system, but it is recommended plug at the first impression.

Even when it is exchanged from OEM, there is almost no sense of incongruity in use and design.
Moreover, since the fingertip grips firmly, it does not slip and fingers slip off almost.
Because the Lever holder is Black, I got a feeling of cohesiveness and made it Black and it was the correct answer.

This is the second time we are wearing it, but it will start with Cell one shot. (It is natural because it is a new item) The engine is bad for a while and lastly
It was released from trouble because Starter was not used until it was not used. Opportunities to ride will also increase. After replacing the last Plug
I used it for 4 years. I will change it frequently this time.

I took 11,500? This time and replaced it for the first Iridium plugs.

I removed the Seat, lifted the tank and worked, but it took around 20 minutes.
After installing the Plug, when I hung the Engine, Idling was first stable. When I ran it I could actually feel that the rushing up was so different with Smooth. Because it is just a new Plug, it may have felt so - - !

As soon as GB 250 CLUBMAN travel distance is 50000 ?, it purchased and ran well for 29 years.

It is enough just as usual to use Motorcycle, so it is just as adequate as attached to Manufacturer's shipment.


I tried windshield IRIDIUM and so on in the past but I am insensitive, so it seems like it has some effect "Qi" I only did it. Of course it should be different from durability, but I am also looking forward to Plug replacement.

BONNEVILLET100 (Air cooling model) I installed it in Front of.
Caliper and disc are still NORMAL.

The Pad I have used up to now is OEM → Bethra METAL → RKMega alloy → Metallica Normal specifications → PROJECT μ μSpital METAL this time.

BONNEVILLE 's Front brake is ineffective, so I tried Pad replacement for the braking force but Vesla and RK were almost unchanged from OEM, Metallica Normal specificationsPad was quite effective and satisfied.
Just saying it works well, I was looking for a Pad that can be full Brake even with a slightly weaker force, when I was in full Brake, I needed to grab Lever with a lot of strength..

Metallica Normal specifications or better Pad is a thing of for Race, but RacePad that can be used for BONNEVILLE's one-touch 2 PODCaliper did not exist but it was giving up, but Brake Pads's Lineup When I was looking out at the bot, I caught this Pad by chance.
Although it seems to be a famous Manufacturer for 4 wheel Brake Pads, the popularity of Pad for two wheels seems to be different as it seems to be, as there is not much information found even in the Net, there was also a bit uneasy but it is used for Normal caliper of BONNEVILLE It is possible to for RacePad so I tried buying it unexpectedly.

The thickness of the back plate is about 4 mm as same as Metallica, and Edge of Plate may be Laser cut perhaps because it is sharp like Metallica.
Braking force when Pad is cold is the same as Metallica Normal specifications.
I think that it will not warm up in town unless deliberately repeating full Brake.

Running at high pace at Winding and warming up Pad will demonstrate braking power over Metallica NORMAL.
If you attach RacePad to a regular Motorcycle, it seems that it may be difficult to get on in public roads because it is too effective, but Brake of BONNEVILLE is so effective that I finally got this Pad and it looks like a normal Motorcycle.
I do not feel difficult to get on because it exerts the braking force as much as I grasped Metallica.

I thought about replacing Caliper and disc but thought that this Pad was enough for running public roads.

Just my BONNEVILLE is exchanged for Radial master, Front fork spring is also exchanged for Other Company Product, and Fork oil's oil level is also adjusted so you may get a different impression from Full normal car body.

There is also an LED Lamp with a device for heat dissipation behind Valve, but there are cases where it can not fit in the Headlight case eventually, but since the back of Valve does not protrude, Valve will be in Beauty To fit in.

I bought this lever set for CB400SS, which is a vintage style motorbike and this product is very suitable and fit the style. Exspecially the chrome coating, a huge difference compare with original Honda Lever and even shinny than any other "Silver" lever. Good pricing, Good product!

I also think that it is good for Motorcycle. It is better for Engine than for one exchange at two times with a high Filter.

'