Kembali ke atas

Plug is changing in 2 to 3 years even if it is not in good condition unless it is irritable or high endurance. Indeed it is a start condition, from Idling to Red zone I ride well.

Although the same Besla 's Resin pad was installed close to a new article with almost no decrease, Fei Ring was bad for anything, and at the beginning Caliper and OEMMASTER pushed one after the other though I thought it was such a thing,
Even if Atari is not working as a trial, both braking performance and fee Ring have been upgraded to Large width. Dust is also less than Resin.

It is a Manufacturer that has a track record at Race in own production and can be trusted, so if you do run like a Sports run or a load as it is, it is a Recommendation.

I have heard the reputation of this Plug, but I tried buying it to be handled by Webike.
So far as Watani's designation OEM DPR Gap 1. I adjusted it to 3 mm and used it. Ignition system and lighting and fans (Cause of voltage eating) And is completely processing Wiring is divided.
Even when I changed Igniter and Coil "Beauty is on fire" Although I was impressed with this, I will go further up when I put this in. The cloudy rush of about 5000 rpm from Clutch meat is like Silky, it seems that generations have gone lightly for about 10 years. I feel that my heart or exhaust smell has also decreased (Lol)
However, it is said that the introduction of Wotani SPll is the Large premise as minimum as Mr. Shimaba says from the import distributor. Horribly Gap is wide so fire will not fly in the same Coil.
If the fans turn around due to heavy traffic in the summer, there are many misfires → JR 8C installed, but ... If you want to enjoy drastic solutions and fine Feel, I recommend this combination.

Hello. I bought this oil filter for my Yamaha YZF R1 2005. The package was well packaged, came, without any damage. The oil filter HIFLOFILTRO HF-303 was designed easily and without problems. The quality of the goods is as high as it should be. I will buy more. I recommend it to everyone. Do not regret that you buy it for your favorite motorcycle. I wish everyone good luck and success. Thank you .

Discovering the Spark plug that looks like the face on the product explanation screen of Wa Big who happens to be found. Regarding its use, this plug which encourages watani attachment to the ignition system. The purchase decided immediately for a car that meets the conditions! When looking at the real thing, Steel color which Blue took first gets an eye out. The center electrode of the tapping was NGK - Compared to DR8EA, it will be positioned more towards the center of the combustion chamber by 1 mm or more, which will increase expectations for combustion efficiency Up. However, looking at the details, I can not deny the feeling that it is more complicated to make than JAPAN's Plug. BALI of the center electrode and screw terminal type terminal are obviously off center. , I feel a little cheapness because I am watching JAPAN items with high precision from the usual. However, if you actually use it and have sufficient performance and durability, you can say that it is not necessary to request such parts that are not normally visible. I installed it immediately, but the exchange itself is exactly the same as regular Plug exchange and there is no particular problem. The accuracy of the Screw part seems to be a passing point. When I try to cover Plug cap, it is Fashion that Blue 's Steel color looks sharp. And Engine start! - - - That sounds exhaust sound from Mild something more than usual. Because it is a single cylinder, there is a place called Dododo, but it is called Toto. However, rather than being cheesy rather than luxurious - - -. Also, the warm exhaust gas Gas in the winter season has Gas smell, but it feels like it has been relaxed. Impression that Engine braking became Mild when I actually ran. I have stopped playing. Furthermore, Engine vibration seems to be decreasing. Since Cowl was wearing, engine oscillation was swaying the edge of Cowl, as it was Big Li after replacing the Plug, it became impossible to see it. It is feeling that the rise is also powerful though it is Mild. I am surprised that there is such a change with just one Plug. I ran about 20 kilometers, but I did not feel Minus factor. I would like to see the impact on fuel economy and the durability of the plug itself. It is limited to strong motorcycle of watani equipped car or ignition system, but it is recommended plug at the first impression.

This is the second time we are wearing it, but it will start with Cell one shot. (It is natural because it is a new item) The engine is bad for a while and lastly
It was released from trouble because Starter was not used until it was not used. Opportunities to ride will also increase. After replacing the last Plug
I used it for 4 years. I will change it frequently this time.

I took 11,500? This time and replaced it for the first Iridium plugs.

I removed the Seat, lifted the tank and worked, but it took around 20 minutes.
After installing the Plug, when I hung the Engine, Idling was first stable. When I ran it I could actually feel that the rushing up was so different with Smooth. Because it is just a new Plug, it may have felt so - - !

As soon as GB 250 CLUBMAN travel distance is 50000 ?, it purchased and ran well for 29 years.

It is enough just as usual to use Motorcycle, so it is just as adequate as attached to Manufacturer's shipment.


I tried windshield IRIDIUM and so on in the past but I am insensitive, so it seems like it has some effect "Qi" I only did it. Of course it should be different from durability, but I am also looking forward to Plug replacement.

I was able to use the product repeatedly over and over so I bought it for a car I'd like to ride yet.
I am sorry that there is no attached image,
Of course you can attach it with a pon.

Oil Although it does not understand the degree of effect because it is simultaneous, since it is pretty eye-sounding Mesh and magnet built-in, it seems to pick up Garbage considerably and I am looking forward to the next Oil exchange.

It seems that the role like Oil cooler is also true, I ran the national highway for about two hours during the day, but the fan was able to run comfortably almost without turning.

A dedicated filter wrench is unnecessary, so Filter replacement can be done easily. In addition, because Yoshimura's sticker of not for sale is attached, there is Premium feeling more than ordinary goods.

I've been picking this Filter for about 3 years now, but I will lick Nut when I remove it. Ideas with good nomination with Nut are spoiled. Manufacturer is not going to improve it.

Removing Cowl, removing Wheel, removing Front fork, and removing Stem, how Bearing did not match.
I'm sorry.

Exchange for 10,000 kilometers since the previous Plug replacement.
I was worried about Windshield IRIDIUM, but considering the difference in price, we chose to replace Normal plug with Piece.

After the exchange, engine racing, Idling's stability etc etc. It got better..

I tried driving back to the old Plug, so I understood the difference clearly.

NGK's Iridium plugs (DPR8EIX-9) It is
With the thing that was installed with OEM Product
It is the same thing..
I felt somewhat worse the engine's blowing, so I decided to exchange it for a new one (^^) /



After Plug replacement, startability is improved and Idling is stable (^-^)

The CB 1300 can not work without removing the tank, but the exchange work was completed in about 20 minutes (^. ^)

I feel good when the rotation of Engine turns comfortably (^ ^ ♪

While maintaining a cold off-season do maintenance
I'd like to go out in the early spring (^ ◇ ^)

It is an exchange from the Iridium plugs.
I also used expensive Plug in the past, but I made it this Plug from the reason of Cost's cheapness.
Although there may be some differences in performance, I do not feel the change in normal driving.
I plan to maintain Engine performance with frequent replacement.

'