Kembali ke atas

It chose by appearance.
A portion black when grasping is collapse.

It purchased to XR230.
It is a conforming item.
Although the muffler of the barrel 4 was purchased from before the year, since the clearing work in cold inside was hard, it remained as it was until now.
Since it also becomes a good season to get warm from now on and to also ride on a motorcycle and to tamper, it goes into muffler clearing work targeting a warm day, and also performs carburetor setting out.
In addition, simultaneous purchase also of the pilot jet set product number 752306 was carried out.

เป็นอุปกรณ์ที่ออกแบบได้สวยงาม ทั้งวัสดุและสีสัน สามารถติดตั้งได้งานด้วยตัวเองในเวลาอันสั้น และสามารถใช้ได้กับรถหลายรุ่น โดนแสดงแอกถึงประสิทธิภาพอย่างชัดเจน ทั้งการติดเครื่องยนต์ที่ง่ายขึ้น การขับขี่ทางไกลด้วยกำลังเครื่องยนต์ที่ดีขึ้นอย่างเห็นได้ชัด และการครอบของหัวเทียนมีความแน่น สามารถป้องกันน้ำหรือผุ่นละอองได้เป็นอย่างดี It is a beautifully designed device. Materials and colors Can be installed manually in a short time. And it can be used on many models. Show the yoke to clear performance. The engine is easier. Long-distance driving with noticeably improved engine power. And the cover of the spark plug. Water resistant or dustproof. (Translated by google translation)

We installed the MRA Screen on the W650, but purchased it as a measure against the coldness of the fingertip. I tried running for about 30 minutes when the maximum temperature was around 10 degrees, but I ran enough in summer Gloves.

Previously I used Puppy 's Handlebar Cover, but I felt bothersome on desorption and hand - operated operation I bought a WorldWalk Knuckle guard. It is also solidly made, windshield effect is high and it can respond to sudden rain all seasons seems to be used. Just when the temperature was below 5 degrees, I felt that long distances were hard even if there is Grip heater. A little more Reduction in cost It is a wonderful item that I think the number of users will increase if it can be done.

I'm from sri lanka , its hard find OEM products here bt when i saw this site and orderd it fast shipped also a hight tone siren alarm here no need to aditional work just plug security harness thats all need. The packing of package is good and secure , they even give you two security stickers and wire tides. Alarm amed in 60s and when you repair your bike or filling fuel to bike you can turn it off thats a good option . Finnaly to say its good product no need about your bike battery life,

I purchased thought that it was necessary to introduce Honda Alarm - - - I was enclosed with Honda Alarm (sweat) Just because it is a ManufacturerOEM Parts Number so we have better quality than Double-sided Tape selling at mass merchandisers - We only save the necessary portion for use and use it. Because of OEM Parts Number, I think that the gold price is high, but I can use it somewhat.

Plus side : Price is cheap, around (grip) Soft, I think that it is good not to get stiff even in cold weather, individuals with many vibrations.

Minus surface : Grip becomes thick (About Grip heater included) So, for those who are Small in hands, depending on the angle of Handlebar, the thickness increases, Lever and Handlebar (Core of) There is a possibility that the thing may feel distant and it may be difficult to walk around so I think that the evaluation will break up.

Because my FUSION can not adjust the angle for Normal handle, I felt it slightly upward more than to Upright (Feeling holding down from above) became.
Because it is a Scooter which does not hold down even Positionally, the difference of several millimeters is sensuously pretty much Large.
Recommended for those who can adjust Handle position based on the thickness of Grip.

On the other hand, Direct feeling of Handlebar becomes thin, so I feel dull when I turn around.

A bit thick, easy to use ♪ slippery and slim small grooves
I think that hands are hard to hurt even for a long time.
I also think I will purchase this Grip next.

เป็นปลอกแฮนด์ที่สวยมาก เนื้อวัสดุที่มีคุณภาพ การออกแบบที่ดี ขั้นตอนในการใส่เพียง 1-2 ขั้นตอนก็เรียบร้อย เหมาะกับการใช้งานที่หลากหลายทั้งทางใกล้และการเดินทางไกล ช่วยลดการสั่นสะเทือนในขณะขับขี่ กระชับเวลาเร่งคันเร่ง และสามารถทนต่อฝุ่นและน้ำโดยไม่ลื่นและเสื่อมสภาพ ผมใช้ในการเดินทางมากกว่า 500 กม ในครั้งเดียว และจะใช้ในการเดินทางไกลต่อไป It is a very handsome casing. Quality material Good design Step in just 1-2 steps to complete. Suitable for a wide range of applications both near and far. Reduces vibration while driving. Accelerated accelerator accelerator And can withstand dust and water without slipping and wear. I used to travel more than 500 km at one time and it is used to travel further. (translated by Google Translator)

I am interested in the number of impressions and evaluation and purchased. It sounds like a hard grip, but I felt the impression that vibrations are hard to be transmitted. I thought that vibration would come directly if it was stiff, but I was surprised that it decreased.

The grip of the Pro grip that I used so far came a lot, so if I order an exchange I will not come back to what the end of the year (T д T)

Up to now Grip used only Pro grip, but it was also mandatory for Pierced Type (Hand guard is for Bar Open End) , The other Manufacturer gave up despite the good Design even crying.

... thought that this is the case, I decided to avoid purchasing GripCutter at the same time and purchase the Closed End who wanted to use it more than before.

Ultimately, as Progrip gets tired of, RENTHAL 's PillowGrip or KEVLAR Grip and Domino' s Cross grip and hesitation, ultimately the color (Lol) Determined by ... Blue so (^_^;)

However, domino 's Cross grip seems to have a good reputation among others, which I also purchased, but I felt relieved when I saw the real thing (Lol).

Before that, regarding the installation, first of all Closed End 's Grip, so we purchased a GripCutter (Scheduled to be reviewed separately) Penetrating completed with a hole with cucumber using.

After that, remove the Grip to be removed from the Handlebar by spraying the Parts Cleaner and push the Grip which opened the hole and push the Parts cleaner onto the Grip again to install it.

If it is not easy to attach, including hand guard removal, the work will be about 30 minutes.

I do not like glue or Wiring, but it will hinder operation in the past etc etc. There was no problem, so I can not say it unconditionally, but I judge it as Large sturdy.

After completing the installation, I ran near the field immediately, but I felt that I absorbed the vibration well with a soft feeling than the earthquake-resistant Gel of the previous Pro grip.

However, since it is also Large thing after all, it is satisfied only with Large.

It seems short in durability, but I like it, so I think I will repeat it again.

Oh, I'd like to try using KEVLAR Grip, but it's after all Design or Large thing (Lol).

The performance of Body is good. Sensitivity is good and it will not malfunction with unnecessary vibration. However, the method of releasing Alarm is roundabout. If the Engine key is ON, grasp the Brake lever and turn off the key to be released (It sounds twice with Phi Phi). In the morning, in order to release the key from the OFF state, such as when pushing Motorcycle by pressing it before running, hold the Brake lever and turn the key on and off. (Phi, Pipi ring four times). At this time, the electronic devices that are powered from the ACC position of the key are simultaneously turned on and off in a short time. How is this?. It is noisy to ring four times. So instead of turning the keys ON and OFF, I attach a Small Type Switch between Alarm Body and the speaker and mute when I do not want to sound.

Almost like American!
I also have weight, and I am satisfied because it is not so expensive as to price!
With JOKER Helmet you can come up with astringency!

If the Plug is a consumable item, even a Cable consumable. Planned for replacement at plug replacement. If you replace it with Dress-up to make it Red, because it's Sale.

'