It is supposed to be compatible with 93 'KLX 250 S, but Ring of Center' s Rubber is a cabarever and there is a gap with Oil filterCap, it is not useful for a role, and Oil filterCap does not close a few millimeters than an OEM Filter! I want to return but because the time from purchase is also running, I can not use it for the above-mentioned models that only crying..
I felt the feeling of power up over the whole area clearly and I felt a sense that Engine Displacement Volume rose slightly.
Traditional feeling in a low revolution range (Get it Ruined) There was, but it suddenly stretches.
Suddenly inserting Axel slightly improved pickup.
Feeling that it accelerates gently as rotation increases.
Torque is not morimori, it accelerates reasonably without Image.
Impression that Power curve has changed
The arrival speed at accelerating on commuting became faster.
(It is presumed that the highest speed is probably going up as well. )
I bought it with Mirror exchange of the 2017 year Grom, but ...
I installed Style fun and cool.
The installation of the car body was installed snugly.
It is only the ground that you can adjust the angle of Mirror.
The angular width is small to turn it upwards, and I do not add it at all.
For two days I worried about various good ideas but abandoned it.
It will not be a shame.
It is used in conjunction with SP Tadao's POWERBOX.
I am using it for Circuit driving, but the acceleration from the rise is definitely better with NORMAL and stepped up.
Weight is also about half of OEM, so it is Recommendation for CRFUser..
Since the Silencer band area was a little troublesome at the time of installation, only one star was reduced.
When we arrived, it was already floating from release paper.
It seemed that the adhesive strength was not 0 and the season was still hot, so I tried adhering to Tank in the meantime and then it will float after a while.
As another means, by holding down from above for a long time, I hope that the shape of Pad itself will become familiar with Tank, I will keep curing Tape from above and keep it familiar 2 months.
I thought that it would have become familiar with it and seemed to be sticking somewhat when removing the curing tape.
But. It floated on the next day.
If you leave it like this, you will scratch the painting of Tank if you get in dust, so you only have to peel off.
It is mere Large loss.
Feeling of use
As expected, it is sweeter than Bolt stoppage to Carrier, so if it is a box with a horizontal width, it will become more severe for the unbalance of luggage etc.
However, it is fixed more firmly than expected, and there is little wobble.
I am wearing a box named B 47 of GIVI, but I think that the box width up to about 30 L is about 40 cm, so I feel that the feeling of use does not change from the one fixed to the carrier.
As this product is once taken BALI, I think that Seat will not be scratched immediately, but if it fixes, the Gold genus part will be strongly pressed against Seat, so long term use and heavy luggage etc If you post it probably Seat will be torn.
Also, since the width of the item is narrow, Belt for fixing also goes to Cowl
To be strongly pressed, Belt's rubbing measures are also necessary.
For the wounds of Seat I will fold the micro fiber toowel for washing for Vehicle for the time being.
We have not taken countermeasures concerning Belt's rubbing, but we plan to paste a scratch prevention Seat on the Cowl side.
I bought it because I need a Joint gasket for exhaust system replacement. There is no problem in mounting.
Gasket corresponding to Injection's VTR 250 "JPH-9" It's ProductNo so do not make a mistake.
* Carburetor cars and Injection cars have different Pipe diameters, so pay attention to that point as well!