Kembali ke atas

It chose by appearance.
A portion black when grasping is collapse.

Since oil change time came, it purchases in order to also exchange filters simultaneously.
I wanted red ....

It became smart at the highest.
Although it is somewhat high, please try!!

It attaches above all and safe.
This No. 1

In order to attach a top box, it attached to 99 cbr600f.
It does not compare with the other company at the time of purchase, but although purchased, structure is also solid and it is satisfied.
Without removing a tandem bar, it can equip and is convenient.
A bolt only exchanges an attached thing as it is pure.
Since the load hook is also attached as the photograph, it becomes easy to carry out loading at the time of touring.
Since it can use also as Bar of tan DEMA, it is pleasing.
Seemingly, it will be easier to hold than pure Bar.

I made this Filter the same as last time in the third Oil exchange.
Filter wrench is not required, there is no new expense, even in terms of performance
Since I could use it without problems, I would like to repeat it in the future.

Order these grips for a Honda CBR1000f as per the listing but they are to short,I should have measured the old grips instead of trusting the listing so please check before you order.Nice grip otherwise.

I purchased Green Light because the installed Motorcycle is Z1000, but the texture is much better than I expected.
Installation can only be done by removing the original Filler cap, so it can be done in 10 seconds. Rather it may take more time to get the item out of the box ... lol

nice to replce with iridium spark plug in my honda xr. hope good perfomance with this plug. good quilty product.no issue with packaging

I have been on the XR 250 BAJA, which has been riding for 21 years.

I bought it because NORMAL's feeling of mnumu nuance was anxious.

After mounting, we got on the Touch which was more than expected, Snap, and easy to control

I feel that my Breaking has improved.

I wish I had to exchange it sooner..

By the way, because Rotor of Breaking system was also exchanged together, compatibility may have been good.

HELLO I'M SATISFIED OF THIS PRODUCT. SO I NOTICED AROUND 5000 RPM ,THE ENGINE SEEMS LIKE TO HAVE BLOWS. AS IS AN RACING PLUG YOU HAVE TO MAINTAIN A CERTAIN POWER FOR AVOIDING BLOWS.UP 5000 RPM YOU HAVE GOOD SENSATIONS.

We use it for Initial Model VTR. In the winter, I could not afford to catch Chalk, but I feel that the stability has been improved remarkably! Since only two months have passed since I exchanged it, I am not sure about Cospa and exhaustion However, I receive the impression that it is comparable to that just after I replaced it for the moment. I like the extent that it will probably be Windshield IRIDIUM for the next exchange as well

In the case of the SR 400 OEM's Reserve tank integrated Master cylinder, Parts itself will inevitably become Large, so Handlebar replacement etc etc. , Custom around the Handlebar may interfere with fine adjustment of the positional relationship of each part. As this product is separate from the Reserve tank, compared with OEM, the degree of freedom of the installation position is high, it is a nice point for the Custom faction.

By the way, Brake's Fing Ring itself changes obviously compared to OEM.

OEM 's Master cylinder is early Touch, the rise of braking is relatively strong and it is clearly clear, there is no change in braking force which is too large even if gradually grasping from there, a certain pressure is applied Wherever, it was Fei Ring that seemed to work strongly, but I did not like it much.

On the other hand, this product often says "Linear" It is effective. The braking force rises to Smooth by the grasping amount. I think that the diameter of Master cylinder may be different from OEM, but obviously the controllability has improved.

Of course, I think that adjustment can be done by characteristics of Brake line and Pad, so it is only comparison with Master cylinder.

Also, the Lever position adjustment mechanism of the Dial formula, which is not found in the OEM, was delightful. It can be adjusted in a moment without tools.

Wiring processing of Brake switch is necessary, but it is not so difficult task, so if you are familiar with terminal processing work, Wiring processing will end within 5 minutes.

I have replace SKF fork seal for my CB400sf and it much better than the OEM. With it low friction design the fork move smoothly and even though it still remain good sealed from dust from outside and oil leak from inside. Highly recommended. Best

Every time I replace Motorcycle, I am doing it.
Oil cap around the Engine is also Black this time, I replaced it for Gold though it was one point
Every time it leaves it on the trade-in car and leaves it at hand only increases Normal oilCap (Lol)

Installation and so on are easy task of changing from Normal cap to Gold (Lol)
After all Gold is shining in black

'