Kembali ke atas

Saddlebag of Enduris Tan purchased for Silencer because it has partially melted.
Originally, Silencer heat guard was attached, but the length was only 12 cm, and in the forest road Saddlebag gradually moved and hit the Silencer. Although I have not yet gone to the forest road after attaching this Guard, it is probably Large enough to cover the entire Silencer, so I think probably Large is durable.

I made this Filter the same as last time in the third Oil exchange.
Filter wrench is not required, there is no new expense, even in terms of performance
Since I could use it without problems, I would like to repeat it in the future.

This DAYTONA Silencer Heat Guard is the product that I looking for. Because it can use as Heat Guard and also use to protect exhaust when motorcycle sliders on the side of the bike. My exhaust is Yoshimura R-77. Although this exhaust not circular but it can fit well.

How much iron powder etc on Magnet etc. I'm not sure whether it is adsorbed, but with Filter + Alpha this price has a sense of security and sense of security. We will continue to use it in the future.

As the hem of the ride IngPants has melted by the heat of the Exhaust System, purchase as a measure.
As ordinary as shown in the photo, but it is not Visual White in the face so I stroked the Carbon Seat like a photo on the table. As the backing as shown in the picture? Put on the AluminumSeal for the kitchen for the purpose of preventing adhesion and peeling of the dirt at the Slit part. The state of the photograph? Which confirmed the positional relation and made this book. I am satisfied because the appearance is getting better and the function is also good.

I have use this oil filter for few time last year. Good oil filter with affordable price. Fit well on the bike no leak. Can last up to 8000km. Two times oil change.

Motorcycle is for Mission and Engine to share Oil. In this time Shift feeling is lightly raised and lowered, Magnet effect is out. It is always the second time in 3000 km, Filter exchange at the same time, scheduled for the third time and 900 km afterwards.
It is a product that feels good even that much. Although it was a Honda OEM school, I will try this product from now on.

【What made you decide the purchase?】
I usually use the Oil Filter of DAYTONA.
Although it was not particularly dissatisfied with the performance, I tried purchasing because I wanted to try out what Magnet entrance is.

【How was it actually used?】
I was surprised to see the thing I ordered and received. I listed only Kawasaki and Honda in the adaptation model, and I felt I thought that I ordered the wrong things unexpectedly. For confirmation, confirming ProductNo by Homepage of KIJIMA was relieved without being wrong, but as long as writing the applicable car model at half end, divide it like the item of DAYTONA and divide it into Catalogue or Homepage compatibility table without writing anything I think that it is better to say Style to look at.
Although it is hard to show on the picture, the contents of the filter paper is almost the same as the number of folds compared to the one of DAYTONA.
Actually wearing, the Oil capacity of the specified Oil Filter capacity 2. For 7 Liter, 2. I put in 5 Liter and saw the state.
When it was Oil Filter of DAYTONA, it was exactly that amount, but in the Oil Filter of KIJIMA why it was put in somehow somehow, so connecting Rubber hose to Syringe and about 200 ml from the oil filling port of Oil I pulled out.
It does not seem that there is 200 ml in just the volume of Magnet inside, and I do not know whether it is a structural difference, but it is somewhat disgusting that Oil capacity will change by 200 ml just because Manufacturer is different.

【Mounting was difficult?】
I could install it without any change from Oil Filter of DAYTONA which I always use.
In the case of Cup type Filter wrench, I use Torque wrench for just in case.

【Please tell me the installation point and hang】
Those who have done it is commonsense, but do not forget to paint the engine oil on O-ring.
Also, when you remove the installed Filter, if you are tightening with the specified Torque in the case of Large resistance, the mountain will be licking in the Filter wrench of Cup type, so I will remove it separately using Band type Filter wrench I am in.

[Is there anything I was disappointed about?]
Although there is no particular problem in terms of performance, it was miscalculation that Oil capacity changed only by changing Filter's brand name. I do not know whether the structure is fundamentally different from the Filter of DAYTONA entering Magnet, but if it says as an adaptive car model you can make it according to OEM's Filter and like this time I thought I'd rather not get out of Oil.

【Hope for Manufacturer - Please let me know if you have any improvement points]
I do not say that the place of the adaptive car model described in the Package should cover all the car models, but I wanted you to write all about Manufacturer name of the car model that it adapts at the very least.

【Have you compared items?】
- DAYTONA Oil Filter 67926
I used this until I put the KIJIMA Oil Filter.
Although Magnet is not included, it is cheaper than the OEM Product, and the Oil capacity conforms to OEM Product, so I will return the next Filter exchange here.

Although there is no Trouble since installing this Filter, the Oil capacity is also reduced by 200 ml as well, so it is a bit uneasy at the high temperature in summer.
I'm still doing Oil exchanges only once, and I'm thinking I'm going to return to DAYTONA's thing if I run about 3,000 kilometers further.

I bought a hole in Waterproof Bag and I purchased it surely that I will not physically touch it rather than struggling to suspend Bag. I felt like I installed a suitable iron plate purchased at Home center from color and shape, so I painted it with Black's heat resistant paint.
Because of the test, it was high speed, we felt that it was getting warmer in the place I touched after I ran about 30 minutes on one way along the way down, there was never a hole to open. It may be different when running for a few hours, but for the moment I feel that it seems likely that it will not become too nervous to touch the exhaust system of Side bag.
Installation is troublesome. It is good to preliminarily loosen the Heat Guard and the mounting band temporarily and attach them to the Exhaust System and align the protection seats and the Band while tightening the Band.

I purchased this exhaust for my 2015 Honda NM4 a few weeks ago. Install took about 30 minutes. This exhaust is a quality product and construction and quality are excellent. It gives the bike a nice deep tone, and sounds great when you open up the throttle. It isn't too loud, but you can definitely be heard. I would recommend this exhaust if you are in the market for an aftermarket exhaust for your NM4.

I bought it for Yamaha MT-09 Racer.
I was relieved because BMW K - 100 RS which I was riding in was using K & N Filter again and again.
The good place of K & NOil Filter is convenient and comfortable to be able to be installed with Glasses without need of Filter wrench.
But the price is as high as the dimension. Is it something you can not do cheaper at a bit more.
I believe the performance is also good if the price is high ....

Postscript, O-ring Rubber is not attached, probably it is not necessary for this product separately.

I use it as Joint gasket when diverting Motocrosser's Exhaust System to 250 SB.
Since Exhaust System is impossible, Exchange Span is about half a year to about a year.

In my way I only have 2000 km until the replacement time.
Life is too short
OEM has more than 10,000 km, so it's too much
Oil replacement earlier Span is useless
I want at least 5000 km - 8000 km
In addition to that it is ineffective and operability is also bad, so we can not recommend it
It is cheaper than OEM but 40 km / It is not effective from the way by sudden braking after exceeding h
Feeling that it will work up to the middle, but after that there will gradually rise without a reaction
VT 400 S is one-push two pod Caliper, Single disc. It may be incompatible.
It is not suitable for VT 400 S, it is not recommended for the same model.
It may be good if you are lightweight model, opposite for pod or dual disk
As OEM is \ 5550, it may be good as a price.
Please do not drink me because it is my image and my preference.
Reference level please.

I got lost as DAYTONA 's RedPad but Review was good, so I made it for this item.
It is performance as expected.
And how much is Life.

I bought it for Carrier installation.
Those of Color custom order, OEM's Rear Center Cowl was originally glossy without Black, but this item is glossy Black.

Those who wish to install with no glossless black need to Cut the originally attached OEM Product, but there is a Cut surface on the Reverse side.
If you do not mind especially, or if you feel that glossy black is rather one point like me, you can use it as it is not necessary for Cut.