Kembali ke atas

Aprilia RS125 MY08 Although IW01-31 (an equivalent for NGK No. 10) is usually used for racing chamber specification, only a winter season raises the main jet No. 1, and is using IW01-29 (an equivalent for NGK No. 9).

Neither blink nor lighting is carried out.
It was the same although it did by other motorcycle.
If it returns to the relay of normal, it will operate correctly.
They are inferior goods!

In order to make the CRM 80 running even a little well, I exchanged this product for CRM 50 from OEMCDI.

As a CMR 80 ride, it is a classic Custom.

Because it is a product for CMR50, it can not be attached as it is because the Coupler is different,
You can prepare the Coupler or connect it easily by Small machining.

(Of course, Waterproof measures will be necessary!)

I feel that startability has improved after replacement.

During ~ - Of course, the low speed will be slightly better.

Recently, since the product seems to be for CRM 80, those who are considering purchasing from now
Those who bought it can not afford it.

I purchased Green Light because the installed Motorcycle is Z1000, but the texture is much better than I expected.
Installation can only be done by removing the original Filler cap, so it can be done in 10 seconds. Rather it may take more time to get the item out of the box ... lol

Every time I replace Motorcycle, I am doing it.
Oil cap around the Engine is also Black this time, I replaced it for Gold though it was one point
Every time it leaves it on the trade-in car and leaves it at hand only increases Normal oilCap (Lol)

Installation and so on are easy task of changing from Normal cap to Gold (Lol)
After all Gold is shining in black

Size and accuracy are good as well. It is six months but it is clean without fading. I think that a little individuality may come out together with Stem Cap.

yeah i though , i bought the long version, instead they sent me the sort version.. the material is solid , the price is affordable.. , in general i like it.

The attached state is good, but Chatter is too much and I can not see anything Mirror if I try to drive. Unfortunately I gave it. It is a recommendation for those who place importance on the appearance.

Mounting on NS-1.

The same thing as this was attached when purchasing Motorcycle, but since Cable was disconnected, it was replaced.
Anyway Cable is thin! This is the most dissatisfied point.
I want to pay attention to breaking and pulling.

Since it can not turn off the power, the battery will run out quickly with keeping on.
As a matter of fact, replacing the battery is somewhat troublesome.

As a water temperature gauge, it is a cheap class, so it is recommended for people who place importance on COSPA, those who hand out the water temperature gauge for the first time.
Let's buy a high-grade water temperature gauge a little if there is gold and knowledge.

? 【What made you decide the purchase?】
Reliable Brand's NGK. Plug is also NGK so I think that compatibility is also Large.

? 【How was it actually used?】
Motorcycle is old, I feel that Torque has improved in general. Power comes with Axel.

? 【Was it difficult to install? (Hard parts case)】
Work to uninstall Tank and Radiator to remove Ignition coil was quite troublesome. Once you remove the Ignition coil, the code installation work is relatively easy.

? 【Please tell me the point of installation and hang (in the case of Hard parts)】
I straightened this cable from the root of the OEM's Plug cord from the Ignition coil, so I had the power to screw it into the Ignition coil because it was thicker than the OEM code.

? Fit feeling and height when wearing - Please tell me the weight etc (Apparel case) 】Any

? [Is there anything I was disappointed about?]
There is no particular problem.

? [Request to Manufacturer - Please let me know if you have any improvement points]
I would like you to match the thickness of the approximate OEMPlug cord.

? 【Have you compared items?】
Norogy's Hot wire

? [Others]
Confirmation and adjustment are necessary so that the amount of Oil and the amount of fuel do not become thin as much as the combustion efficiency improves.

I do not mind quite how short to run normally.
I worked on only about 10 minutes. If this length, I think that you can considerably reduce Risk of Lever damage.

Хорошо и плотненько наделись, рукой прикасаться приятно, выглядят стильно (для тех кто не любит пестрости а больше склоняется к строгим класическим цветам) Вообщем покупкой доволен, рекомендую! Google translate: Well and densely put on, hand to touch nice, look stylish (for those who do not like variegated and more inclined to strict classical colors) In general, the purchase is satisfied, I recommend!

I attached it to the new REBEL 250. I did not like the Cap of OEM so I purchased it for Dress-up purpose.
Appearance ◎. Texture ◎. I am satisfied ◎. Just because it's a little expensive.

It took the Engine to the KICK 2 or 3 times, but after mounting it was almost one shot ok became the most effective!
I could not really feel the effect like the item description of Others, but I feel like I'm feeling somewhat better with a feeling of being?
Afterwards, the appearance is exchanged in any way It is good that the feeling is strong.
Strictly speaking, if you cut the OEM code according to the instructions, the position of the Connecting Connector will be in a difficult position to restore, so I thought that it would be better to do it in the field.

This is terrible.
Because everyone bought the performance, it would be Large sturdy, but I never used it even when I replaced the battery.
Since the spare battery was attached, it was unpleasant to change the battery immediately on the way in the middle of using it, so when I first exchanged it, the lid was broken in a moment, and even though I was careful when inserting the battery, the terminal breakage Finished with.
If it is a prototype, I think that it is a bad Level if I sell this durability by mass production.
I got angry with industrial products after a long absence.

'