Kembali ke atas

Speaking of Plug NGK trusted Brand
Historic PlugManufacturer
Failure of the Plug itself has been in use for many years but never once.

This led was hard find bt i found from this site thank first for that web bike team. The security system link with that easy plug and fit it to near mirror clam it is very bright at the night. It is very good bright because it antitheft and i can park my bike places, also it is waterproof. battery cosume is very low no problem even i use it months beacause battery was in good health all time it only take 0.3amp , talking about the shiping it was fast and package is saftly again thanku good service.


I bought it with Mirror exchange of the 2017 year Grom, but ...
I installed Style fun and cool.
The installation of the car body was installed snugly.
It is only the ground that you can adjust the angle of Mirror.
The angular width is small to turn it upwards, and I do not add it at all.
For two days I worried about various good ideas but abandoned it.
It will not be a shame.

very bad quality... the product seem like a china second hand mirror ... i will not install it on my bike...cant accept it

I'm from sri lanka , its hard find OEM products here bt when i saw this site and orderd it fast shipped also a hight tone siren alarm here no need to aditional work just plug security harness thats all need. The packing of package is good and secure , they even give you two security stickers and wire tides. Alarm amed in 60s and when you repair your bike or filling fuel to bike you can turn it off thats a good option . Finnaly to say its good product no need about your bike battery life,

Хорошо и плотненько наделись, рукой прикасаться приятно, выглядят стильно (для тех кто не любит пестрости а больше склоняется к строгим класическим цветам) Вообщем покупкой доволен, рекомендую! Google translate: Well and densely put on, hand to touch nice, look stylish (for those who do not like variegated and more inclined to strict classical colors) In general, the purchase is satisfied, I recommend!

I purchased thought that it was necessary to introduce Honda Alarm - - - I was enclosed with Honda Alarm (sweat) Just because it is a ManufacturerOEM Parts Number so we have better quality than Double-sided Tape selling at mass merchandisers - We only save the necessary portion for use and use it. Because of OEM Parts Number, I think that the gold price is high, but I can use it somewhat.

- Decision of purchase
I went to Honda DREAM for 6 month check and I was talking about Security, from a clerk "It is necessary if Custom has done so far!" It was a word of.

- Impression after using it
Although it is an option of Honda Alarm, you can visually check the operation of Security. after "Security is working" And I announce you with a flashing and security sticker around, I think that it is effective as Security.

- Mounting difficulty
Security so detailed content can not be posted - - - The traditional Indicator Lamp installation position is pasted to the Tank section, but when you stick it to the Tank section, Wiring becomes exposed and it is not good looking. So when I looked it up in the Net search, Owner, who is located in a really good place, was there and I took the placement of Mr. Owner as reference. Wiring is long because of the Universal Product, and it gets messy when added. I hated the sense of frustration so I processed Wiring and took effect. (Sec

- Others
You can check the blinking of the Indicator Lamp even during the day and think that the blinking of Indicator Lamp is more noticeable at night. I think that it is an optional item essential to Honda Alarm, but if this is set to Alarm it seems that selling price may be slightly higher, but I think that - - - - How about Honda?

Feeling of use
As expected, it is sweeter than Bolt stoppage to Carrier, so if it is a box with a horizontal width, it will become more severe for the unbalance of luggage etc.
However, it is fixed more firmly than expected, and there is little wobble.
I am wearing a box named B 47 of GIVI, but I think that the box width up to about 30 L is about 40 cm, so I feel that the feeling of use does not change from the one fixed to the carrier.

About mounting
As this product is once taken BALI, I think that Seat will not be scratched immediately, but if it fixes, the Gold genus part will be strongly pressed against Seat, so long term use and heavy luggage etc If you post it probably Seat will be torn.
Also, since the width of the item is narrow, Belt for fixing also goes to Cowl
To be strongly pressed, Belt's rubbing measures are also necessary.

For the wounds of Seat I will fold the micro fiber toowel for washing for Vehicle for the time being.
We have not taken countermeasures concerning Belt's rubbing, but we plan to paste a scratch prevention Seat on the Cowl side.

【What made you decide the purchase?】
"DAYTONA AquaProver HG Temp meter" Because there were various Trouble at
Purchase this.
* About Trouble "AquaPRO over server" Described in Implex.
【How was it actually used?】
Actual use is not yet, but with the back light + key off you can also display the clock
Usability is likely to be good.
【Was it difficult to install? (Hard parts case)】
As for the mounting method, if it is a person who always knows the power supply, ACC, GND
There is no problem to watch, back light display.
However, in order to display Thermometer it seems quite difficult outside the applicable model.
【Please tell me the point of installation and hang (in the case of Hard parts)】
However, for Thermometer it is not due to the interrupt premise from OEMECU, Temperature Sensor is not included.
We tried to divert that Thermometer for exchange from AquaProver as mentioned above,
? Connector's TAB, receptacle does not fit as it is (For Connector Included Parts : Can be combined by processing)
? Wiring is Quantity : Because it is 2pc to each other, + / - I tried a combination, but the voltage / Current amount / PRO Kotor's
Whether one is different, six types of Pre-set P-1 to P-6 (Honda / Yamaha / KYMCO) setting
Match without switching. Light motorcycle production in developing countries is Target?
* This neighborhood is self-responsibility, so if it goes well ... If you try to actually display
Voltage / Current amount / It seems necessary to investigate PRO Kotor, so the difficulty level will be quite high.
Beforehand "AquaPRO over server" Since the maximum oil temperature can be recognized, there is no need for present situation.
Condition occurs. If we accurately display the temperature, it seems that a considerable investigation will be necessary.
Also, the color of Wiring is different from my sense.
Red : Always power → OK
Black : ACC → Black at GND?
Green : GND → In normal Black?
And Personally Wondering Wiring There is a sense of color.
However, regardless of Wiring color, for expansion, each with Bullet Terminal
It is highly appreciated that Wiring for branching is prepared.
* But it also does not match the color scheme with Endurance made Grip heater of simultaneous purchase.
Griche also
Red : ACC → There is no particular preference for color, but I want you to combine with the branching Wiring color of Meter
Black : GND → OK
So, it is confused when using the extended Bullet Terminal below.
【Fit feeling and height when wearing - Please tell me the weight etc (Apparel case) ]
[Is there anything I was disappointed about?]
Temperature Sensor input is only for Pre-set ECU.
【Hope for Manufacturer - Please let me know if you have any improvement points]
- I want you to be able to select clock display 24 hour display as well.
- Temperature Sensor input not only for ECU of fixed model,
Please also correspond to input from UniversalTemperature sensor.
- At the very least I want you to unify Wiring colors with in-house products.
【Have you compared items?】
DAYTONA AquaPRO - HG Temp meter
Because I can fix voltage display by Endurance made Grip heater,
Clock display only (There is no clock in Meter of Motorcycle) However,
As we can also check the maximum oil temperature in Circuit,
Although Thermometer is not necessarily required,
Sensor If you can use Thermometer even if sold separately, it will be highly appreciated.

14 year type PCX 125 (JF56) We used it when exchanging outside the company. I compared it with an OEM and it matched without any difference. 500? After running I checked whether there was exhaust leakage, but exhaust was not exhausted at all. OEM Product is slightly higher, so there was nothing wrong with this product that is excellent in COSPA.

I raised the number of Plug and made it to Iridium plugs, Idling 's steady high speed rushing up power became stronger, it became a sharpy fee Ring! This guy works.

The performance of Body is good. Sensitivity is good and it will not malfunction with unnecessary vibration. However, the method of releasing Alarm is roundabout. If the Engine key is ON, grasp the Brake lever and turn off the key to be released (It sounds twice with Phi Phi). In the morning, in order to release the key from the OFF state, such as when pushing Motorcycle by pressing it before running, hold the Brake lever and turn the key on and off. (Phi, Pipi ring four times). At this time, the electronic devices that are powered from the ACC position of the key are simultaneously turned on and off in a short time. How is this?. It is noisy to ring four times. So instead of turning the keys ON and OFF, I attach a Small Type Switch between Alarm Body and the speaker and mute when I do not want to sound.

I exchanged Plug because it exceeded 11000 km. Although it is an impression of about 500 km,
The attachment of Axel at 1500-3000 rpm improved, and the high rotation also turned well
I think. 5 speed 40 km is easier to run. Just 2000-3000 Partial
I feel that the area became irritable, and it became difficult to maintain a little with. I want to increase the vibration...
Because the heat value is not matched, the original Plug may be more comfortable for regular rotation. I am worrying about returning..
Looking at you..