Kembali ke atas

Sepasang Jalu Stang Universal MAGAZI - PROTECH mantap!

Comfortable grips...simple and nice. Good

It attaches above all and safe.
This No. 1

I made this Filter the same as last time in the third Oil exchange.
Filter wrench is not required, there is no new expense, even in terms of performance
Since I could use it without problems, I would like to repeat it in the future.

HELLO I'M SATISFIED OF THIS PRODUCT. SO I NOTICED AROUND 5000 RPM ,THE ENGINE SEEMS LIKE TO HAVE BLOWS. AS IS AN RACING PLUG YOU HAVE TO MAINTAIN A CERTAIN POWER FOR AVOIDING BLOWS.UP 5000 RPM YOU HAVE GOOD SENSATIONS.

We use it for Initial Model VTR. In the winter, I could not afford to catch Chalk, but I feel that the stability has been improved remarkably! Since only two months have passed since I exchanged it, I am not sure about Cospa and exhaustion However, I receive the impression that it is comparable to that just after I replaced it for the moment. I like the extent that it will probably be Windshield IRIDIUM for the next exchange as well

Although the same Besla 's Resin pad was installed close to a new article with almost no decrease, Fei Ring was bad for anything, and at the beginning Caliper and OEMMASTER pushed one after the other though I thought it was such a thing,
Even if Atari is not working as a trial, both braking performance and fee Ring have been upgraded to Large width. Dust is also less than Resin.

It is a Manufacturer that has a track record at Race in own production and can be trusted, so if you do run like a Sports run or a load as it is, it is a Recommendation.

I thought that it could be cheap at with Magnet, purchased, nothing was Paint on the exterior It was good at Simple
Since the tightening Torque is stated in the OEM, I watched it and installed it, but the next time I need to look it up
MT07 was 15 Nm

Hello. I bought this oil filter for my Yamaha YZF R1 2005. The package was well packaged, came, without any damage. The oil filter HIFLOFILTRO HF-303 was designed easily and without problems. The quality of the goods is as high as it should be. I will buy more. I recommend it to everyone. Do not regret that you buy it for your favorite motorcycle. I wish everyone good luck and success. Thank you .

It is my first exchange since I got on a new car. I am amazed by NORMALPad with about 30,000 km. Because I attached Red Pad with a different Motorcycle, I decided without comparing with others in particular. I feel that NORMAL's Rotor is bad, but it seems to be bad, but the credibility is better than NORMAL. I do not know Cost performance yet

Oil Filter is exchanged periodically, but performance is not problem at all.
Also, as long as it functions as a filter, Manufacturer thinks it is unnecessary to keep in mind.

It is a good thing to remove the iron powder generated inside the Engine, so you should purchase and install it and the result will be understood by the next Oil exchange. The apparent Blue Drain bolt will shine and will respond to expectations.

BONNEVILLET100 (Air cooling model) I installed it in Front of.
Caliper and disc are still NORMAL.

The Pad I have used up to now is OEM → Bethra METAL → RKMega alloy → Metallica Normal specifications → PROJECT μ μSpital METAL this time.

BONNEVILLE 's Front brake is ineffective, so I tried Pad replacement for the braking force but Vesla and RK were almost unchanged from OEM, Metallica Normal specificationsPad was quite effective and satisfied.
Just saying it works well, I was looking for a Pad that can be full Brake even with a slightly weaker force, when I was in full Brake, I needed to grab Lever with a lot of strength..

Metallica Normal specifications or better Pad is a thing of for Race, but RacePad that can be used for BONNEVILLE's one-touch 2 PODCaliper did not exist but it was giving up, but Brake Pads's Lineup When I was looking out at the bot, I caught this Pad by chance.
Although it seems to be a famous Manufacturer for 4 wheel Brake Pads, the popularity of Pad for two wheels seems to be different as it seems to be, as there is not much information found even in the Net, there was also a bit uneasy but it is used for Normal caliper of BONNEVILLE It is possible to for RacePad so I tried buying it unexpectedly.

The thickness of the back plate is about 4 mm as same as Metallica, and Edge of Plate may be Laser cut perhaps because it is sharp like Metallica.
Braking force when Pad is cold is the same as Metallica Normal specifications.
I think that it will not warm up in town unless deliberately repeating full Brake.

Running at high pace at Winding and warming up Pad will demonstrate braking power over Metallica NORMAL.
If you attach RacePad to a regular Motorcycle, it seems that it may be difficult to get on in public roads because it is too effective, but Brake of BONNEVILLE is so effective that I finally got this Pad and it looks like a normal Motorcycle.
I do not feel difficult to get on because it exerts the braking force as much as I grasped Metallica.

I thought about replacing Caliper and disc but thought that this Pad was enough for running public roads.

Just my BONNEVILLE is exchanged for Radial master, Front fork spring is also exchanged for Other Company Product, and Fork oil's oil level is also adjusted so you may get a different impression from Full normal car body.

It is difficult to judge the filtration function of Oil Filter by eye observation ...
Because the price is also cheap, I think that it is good to exchange every Oil exchange! Because it is better to do than not do it.

I installed it in the old car of the 1980s. Even at night it was very bright and easy to see. The light scattering method at the time of Low beam is not very good. (It seems like it gets dazzled when the oncoming vehicle came sideways)
The vehicle inspection passed. (Private vehicle inspection).

'