Kembali ke atas

It was attached simply.

It attached to the white giorcub.
It is touch that the color may be unified.
Although the color of the bulb was in sight for a while, I was seldom worried.
When worrisome, I think whether it is also good to LED-ize.

It attached to the white giorcub.
Color was unified and it is [ it feels and ] easy to come out.
Although the color of the bulb was in sight for a while, I was not worried so much.
Probably, it is also good to LED-ize, when worrisome.

this is only for one jet it fitts the honda today perfectly i noticed that the numbers were the same as the original but may have been changerd before non the less you need this for the 80cc bigbore

HELLO I'M SATISFIED OF THIS PRODUCT. SO I NOTICED AROUND 5000 RPM ,THE ENGINE SEEMS LIKE TO HAVE BLOWS. AS IS AN RACING PLUG YOU HAVE TO MAINTAIN A CERTAIN POWER FOR AVOIDING BLOWS.UP 5000 RPM YOU HAVE GOOD SENSATIONS.

We use it for Initial Model VTR. In the winter, I could not afford to catch Chalk, but I feel that the stability has been improved remarkably! Since only two months have passed since I exchanged it, I am not sure about Cospa and exhaustion However, I receive the impression that it is comparable to that just after I replaced it for the moment. I like the extent that it will probably be Windshield IRIDIUM for the next exchange as well

เป็นอุปกรณ์ที่ออกแบบได้สวยงาม ทั้งวัสดุและสีสัน สามารถติดตั้งได้งานด้วยตัวเองในเวลาอันสั้น และสามารถใช้ได้กับรถหลายรุ่น โดนแสดงแอกถึงประสิทธิภาพอย่างชัดเจน ทั้งการติดเครื่องยนต์ที่ง่ายขึ้น การขับขี่ทางไกลด้วยกำลังเครื่องยนต์ที่ดีขึ้นอย่างเห็นได้ชัด และการครอบของหัวเทียนมีความแน่น สามารถป้องกันน้ำหรือผุ่นละอองได้เป็นอย่างดี It is a beautifully designed device. Materials and colors Can be installed manually in a short time. And it can be used on many models. Show the yoke to clear performance. The engine is easier. Long-distance driving with noticeably improved engine power. And the cover of the spark plug. Water resistant or dustproof. (Translated by google translation)

I bought it with Mirror exchange of the 2017 year Grom, but ...
I installed Style fun and cool.
The installation of the car body was installed snugly.
It is only the ground that you can adjust the angle of Mirror.
The angular width is small to turn it upwards, and I do not add it at all.
For two days I worried about various good ideas but abandoned it.
It will not be a shame.

Three months after installation, near the Grip end of Throttle was torn. To be sorry. Since it is not Pierced Type, I wonder if twist could not be absorbed..

The attached state is good, but Chatter is too much and I can not see anything Mirror if I try to drive. Unfortunately I gave it. It is a recommendation for those who place importance on the appearance.

very bad quality... the product seem like a china second hand mirror ... i will not install it on my bike...cant accept it

Хорошо и плотненько наделись, рукой прикасаться приятно, выглядят стильно (для тех кто не любит пестрости а больше склоняется к строгим класическим цветам) Вообщем покупкой доволен, рекомендую! Google translate: Well and densely put on, hand to touch nice, look stylish (for those who do not like variegated and more inclined to strict classical colors) In general, the purchase is satisfied, I recommend!

I used it for DIO FIT, I think that Cost performance is pretty good with price and quality as well as Large satisfaction.
Mirror's dullness, rust etc. If it seems to be replaced here will be clearer.

I used it for DIO FIT, I think that Cost performance is pretty good with price and quality as well as Large satisfaction.
Mirror's dullness, rust etc. If it seems to be replaced here will be clearer.


【What made you decide the purchase?】
To Exhaust System for Replacement

【How was it actually used?】
There was also a case where the Gasket surface was leveled once and used in combination with liquid Gasket once, but it was used ...
I am glad I bought it this time
OEM Gasket was doing something that was impossible to collapse
Is it because it is JA 10, is it individual differences ...
I do not know but when exchanging the exhaust system with JA 10 it is essential to replace Gasket
Not very, but OEM is not reusable

About 30 units of motorcycle have been transferred, but I saw this severe condition for the first time

【Was it difficult to install? (Hard parts case)】
Replace only

【Please tell me the point of installation and hang (in the case of Hard parts)】
It is easy to paint liquid Gasket when installing
Since it falls poignly as it is, it is a measure to eliminate the leakage instead of adhesive + just in case

[Is there anything I was disappointed about?]
nothing special
【Hope for Manufacturer - Please let me know if you have any improvement points]
nothing special
【Have you compared items?】
nothing special
[Others]

Image Quantity : 1pc. Eyes are this KITACO company Gasket
It is the OEM Gasket which was originally attached with the second image

Recommended for exchanging the Exhaust System with Tire replacement
The surface is also rattled, it is crushed and it is crushed, OEM can be reused, it seems that the exhaust leaks ...

'