Kembali ke atas

Since oil change time came, it purchases in order to also exchange filters simultaneously.
I wanted red ....

It attaches above all and safe.
This No. 1

Bolt The direction of the cutout for RightLeft identification of the hole is upward or downward depending on the vehicle type or year, or Quantity : Pair (for Left and Right) There seems to be a difference, Rutor saw Cut the interfering part

I made this Filter the same as last time in the third Oil exchange.
Filter wrench is not required, there is no new expense, even in terms of performance
Since I could use it without problems, I would like to repeat it in the future.

Order these grips for a Honda CBR1000f as per the listing but they are to short,I should have measured the old grips instead of trusting the listing so please check before you order.Nice grip otherwise.

It is used for Off-road motorcycle with Top case. There is another for Off, but because there is Screen at Touring SEROW, I made it for Large type Motorcycle here. This was the correct answer.

nice to replce with iridium spark plug in my honda xr. hope good perfomance with this plug. good quilty product.no issue with packaging

HELLO I'M SATISFIED OF THIS PRODUCT. SO I NOTICED AROUND 5000 RPM ,THE ENGINE SEEMS LIKE TO HAVE BLOWS. AS IS AN RACING PLUG YOU HAVE TO MAINTAIN A CERTAIN POWER FOR AVOIDING BLOWS.UP 5000 RPM YOU HAVE GOOD SENSATIONS.

Headlight of the car at night and the morning sun entered the Back Mirror, it was dazzling and I could not do a good check backwards.
So, I changed this to Mirror, but I only have night driving, but I think that the light of Headlight has been reduced and I think that it was a satisfactory performance.
I do not have much trouble in installation, design is also good, I think that it matches CB 400 SB.
Next time I would like to also verify the case of the morning sun.

cbr1000 only because its conformity is different but it is nice because I bought it for almost half price!.NORMAL same etc. Because the coefficient of friction was good, we chose a paddle sweat exchange.The effect is the same, but the feel is harder than NORMAL, and when it is strongly applied, the sound is also "Snap" ...

I thought that it could be cheap at with Magnet, purchased, nothing was Paint on the exterior It was good at Simple
Since the tightening Torque is stated in the OEM, I watched it and installed it, but the next time I need to look it up
MT07 was 15 Nm

Very good quality. Fast delivery. Low price for excelent item. It will be on my Kawasaki Er6n togheter with water temperature pro-gress.

Oil Filter is exchanged periodically, but performance is not problem at all.
Also, as long as it functions as a filter, Manufacturer thinks it is unnecessary to keep in mind.

Since the scope of OEMMirror's viewing range of T595 was narrow, in 2004 I attached a Type 1 Replica mirror with adjustment function to Bracket and Mirror body.
The blurring due to speed and vibration is also less and the backward visibility is also improved by adjusting Bracket.
As I changed to SpeedTriple 955i without Cowl in 2014, I changed it to base plate for NK 1 and keep using it.
I have been using it for over 10 years but Carbon Mirrors Body has neither discoloration nor cracking.

Excellent quality...good outlook...easy install and the packing is really good, use good sticker and the surface is really prefect

'