HONDA NX650 DOMINATORdesktop_pages_mt_index.motor_name_h1

HONDA NX650 DOMINATOR

It was an adventure bike based on XR600. It featured a unique fork cover that was integrated with the front fender. Its dry weight was 152kg, and was made light.

Kapasitas Mesin 644cc
Horsepower Maksimum 46ps(34kw)/8000rpm
Torsi Maksimum 5.8kg・m(56.9N・m)/5000rpm
Berat Total 152kg
Kapasitas Tangki 13.0 Liter

303 Produk

Produk Rekomendasi

Ulasan Produk

It exchanged together at the time of brake lever exchange.
I was easy to grasp lever form and thought that texture was also good considering a price.
A point regrettable [ one ] has GATA in a pivot part compared with a pure lever.
Operation does not seem to be affected.

I made this Filter the same as last time in the third Oil exchange.
Filter wrench is not required, there is no new expense, even in terms of performance
Since I could use it without problems, I would like to repeat it in the future.

We installed the MRA Screen on the W650, but purchased it as a measure against the coldness of the fingertip. I tried running for about 30 minutes when the maximum temperature was around 10 degrees, but I ran enough in summer Gloves.

I used this for CB 750 RC 42, Lever liked Black. It used to be a Korea made BlackLever, but I like it because it is glossy here. It is Exactly to RC 42 and there is no astringentness The operation feeling is very good

I have heard the reputation of this Plug, but I tried buying it to be handled by Webike.
So far as Watani's designation OEM DPR Gap 1. I adjusted it to 3 mm and used it. Ignition system and lighting and fans (Cause of voltage eating) And is completely processing Wiring is divided.
Even when I changed Igniter and Coil "Beauty is on fire" Although I was impressed with this, I will go further up when I put this in. The cloudy rush of about 5000 rpm from Clutch meat is like Silky, it seems that generations have gone lightly for about 10 years. I feel that my heart or exhaust smell has also decreased (Lol)
However, it is said that the introduction of Wotani SPll is the Large premise as minimum as Mr. Shimaba says from the import distributor. Horribly Gap is wide so fire will not fly in the same Coil.
If the fans turn around due to heavy traffic in the summer, there are many misfires → JR 8C installed, but ... If you want to enjoy drastic solutions and fine Feel, I recommend this combination.

Previously I used Puppy 's Handlebar Cover, but I felt bothersome on desorption and hand - operated operation I bought a WorldWalk Knuckle guard. It is also solidly made, windshield effect is high and it can respond to sudden rain all seasons seems to be used. Just when the temperature was below 5 degrees, I felt that long distances were hard even if there is Grip heater. A little more Reduction in cost It is a wonderful item that I think the number of users will increase if it can be done.

It often takes a fingertip, it is very easy to handle.
Processing by ponding is absolutely nothing.
(^^) I will also upload photos of Clutch lever.

Even when it is exchanged from OEM, there is almost no sense of incongruity in use and design.
Moreover, since the fingertip grips firmly, it does not slip and fingers slip off almost.
Because the Lever holder is Black, I got a feeling of cohesiveness and made it Black and it was the correct answer.