Kembali ke atas


Can be installed and used without problems.
Effect,? Emblem is weakened. ? Beat of the Engine - Vibration lowers. ? There is little power of low rotation.
Afterwards installed RapidMotorcycleEasy also has the same effect (?except for) , But the change is dramatic in RapidMotorcycleEasy. (Because the price is high)

The installation was no problem at all.
When I turned the cell with expectation "Gakki" The sound...
It broke with a single shot.
Moreover, it seems that the debris fell into the Cylinder, turning the Plug back and turning the cell produces an abnormal sound.
I just went for repair as it was.
KawasakiOEMBore Up Kit + Since the port has been modified, it may have been a problem if it was a real OEM.

We installed the MRA Screen on the W650, but purchased it as a measure against the coldness of the fingertip. I tried running for about 30 minutes when the maximum temperature was around 10 degrees, but I ran enough in summer Gloves.

I bought it with Mirror exchange of the 2017 year Grom, but ...
I installed Style fun and cool.
The installation of the car body was installed snugly.
It is only the ground that you can adjust the angle of Mirror.
The angular width is small to turn it upwards, and I do not add it at all.
For two days I worried about various good ideas but abandoned it.
It will not be a shame.

Beginning worsening, deteriorating both running, very troubled by everyday use.
It may be only dTRACKER, but with cdi ignition it feels Gap is too wide

Previously I used Puppy 's Handlebar Cover, but I felt bothersome on desorption and hand - operated operation I bought a WorldWalk Knuckle guard. It is also solidly made, windshield effect is high and it can respond to sudden rain all seasons seems to be used. Just when the temperature was below 5 degrees, I felt that long distances were hard even if there is Grip heater. A little more Reduction in cost It is a wonderful item that I think the number of users will increase if it can be done.

very bad quality... the product seem like a china second hand mirror ... i will not install it on my bike...cant accept it

Very good quality. Fast delivery. Low price for excelent item. It will be on my Kawasaki Er6n togheter with water temperature pro-gress.

Хорошо и плотненько наделись, рукой прикасаться приятно, выглядят стильно (для тех кто не любит пестрости а больше склоняется к строгим класическим цветам) Вообщем покупкой доволен, рекомендую! Google translate: Well and densely put on, hand to touch nice, look stylish (for those who do not like variegated and more inclined to strict classical colors) In general, the purchase is satisfied, I recommend!

The target car is ZOOMR-X. I bought it for the purpose of Bore up, but before the Bore up, map 2 (+KITACO Muffler) So I could not feel Power up, Gasoline is supposed to be dark - - After map up, map 3 is essential and it is good. KITACO installation course on the Internet for installation "Add i-map to GROM" There was and it was helpful. I had a hard time finding without Space putting i-map.

I purchased thought that it was necessary to introduce Honda Alarm - - - I was enclosed with Honda Alarm (sweat) Just because it is a ManufacturerOEM Parts Number so we have better quality than Double-sided Tape selling at mass merchandisers - We only save the necessary portion for use and use it. Because of OEM Parts Number, I think that the gold price is high, but I can use it somewhat.

I attached it to ZOOMER-X. I was anxious for the first time to touch the Engine but there was no problem if I could follow the Instruction Manual. Long wheel base formation etc. Since I was doing a lot already, I was not worried about releasing anything other than Engine, making it a Long wheel base (HURRICANE) I was able to work without lowering Engine as I was doing. The necessary tool was Ratchet (Including Extension) , Cheap Scraper for Gasket removal (It is in the center center) And Oil stone, Torque wrench (5 to 25 Nm) Is it about?. At the same time, i-MAP is also attached, I had a hard time finding a space to put i-MAP. Plug Denso IU24D, KITACO Muffler, Pulley KITACOPower driveKITTypeX, WirusWin Breather Catch tank and Air cleaner. It is 100 Km after break-in but still I can not do full opening scary. It can be realized that Torque is upgrading to the Large width, especially the acceleration of 40 to 80 Km is pleasant, because Weight Roller is set to 9 g, TorqueUP supplements that the bottom was squasker. As a harmful effect of Bore up, Cell naturally does not move (The Cell's Power is insufficient because the compression ratio is rising) , KICK is also so hard that it hurts your feet so you only have to pray that you can attach a Rubber to the part where your foot hits as much as possible. Air cleaner is smoking awfully, perhaps it may be necessary to drill in OEM. I thought that the WirusWin Breather Catch tank which Blowby gas was attached with a tremendous Attachment seems to be useful, I thought that I should attach a one way valve, but I stopped it. I also thought about changing Center spring, but enough. Later, I will consult with the degree of burning of the plug and change the amount of inspiration, and ultimately I will change the weight of Weight Roller.

Feeling of use
As expected, it is sweeter than Bolt stoppage to Carrier, so if it is a box with a horizontal width, it will become more severe for the unbalance of luggage etc.
However, it is fixed more firmly than expected, and there is little wobble.
I am wearing a box named B 47 of GIVI, but I think that the box width up to about 30 L is about 40 cm, so I feel that the feeling of use does not change from the one fixed to the carrier.

About mounting
As this product is once taken BALI, I think that Seat will not be scratched immediately, but if it fixes, the Gold genus part will be strongly pressed against Seat, so long term use and heavy luggage etc If you post it probably Seat will be torn.
Also, since the width of the item is narrow, Belt for fixing also goes to Cowl
To be strongly pressed, Belt's rubbing measures are also necessary.

For the wounds of Seat I will fold the micro fiber toowel for washing for Vehicle for the time being.
We have not taken countermeasures concerning Belt's rubbing, but we plan to paste a scratch prevention Seat on the Cowl side.

I exchanged Plug because it exceeded 11000 km. Although it is an impression of about 500 km,
The attachment of Axel at 1500-3000 rpm improved, and the high rotation also turned well
I think. 5 speed 40 km is easier to run. Just 2000-3000 Partial
I feel that the area became irritable, and it became difficult to maintain a little with. I want to increase the vibration...
Because the heat value is not matched, the original Plug may be more comfortable for regular rotation. I am worrying about returning..
Looking at you..