|Horsepower Maksimum||4ps(3.0 kw)/6000rpm|
|Kapasitas Tangki||- Liter|
I used a Halogen sphere of MICHIBA, a Manufacturer who I do not know well, but since the low ball has run out, I replaced it for this product. When exchanging from NORMAL sphere to MICHIBA, it rarely felt the difference, but this product is good enough to think that Lens cut changed. First, the irradiation range of row is Quantity : Pair (for Left and Right) It gets wider, and the high lights far in the form of Spot. I am surprised to see whether the same Halogen is different up to here ....
However, because of high efficiency, life is a little worried.
Dual head of CBR 150R is dark. 18WX2 So there are some sides that can not be helped, but it is too dark as a motorcycle that can run on highways. So I tried putting the classic pine Stripe. It got pretty bright and I became able to run freely without anxiety.
Although it is dark compared to HID and LED which became the mainstream of four wheel vehicle, CBR 150R is AC power supply (FlywheelMagnet) Therefore, when it is tried to change to the HID and LED of the DC power supply, it has to be replaced from the power supply itself, and even if it is difficult to make it by hardship, the focus often does not suit well, "Too much labor and no success" Sometimes it becomes. Light of AC power supply is easy and reliable to replace with pines Stripe.
There are also people who want to make the number of Watt Large by thinking to make it bright, but it is meaningless rather than to Flywheel Magnet car with a limited amount of electricity generation, rather it gets dark, so it is good to keep Watt number as Standard.
When attaching Valve of PH 7 type, as to keep the convex part of the Gold tool properly in the concave part of Light. If you do not do this, the focus will come to strange places.
The disadvantage of the pine Stripe Motorcycle beam is that there is somewhat difficulty in product accuracy. I purchased it many times, but there were times when the position of the Filament was misaligned, and Glass itself was distorted. When buying at the shop front, it is good to check whether there is any distortion. In the case of mail order, when it arrives, let's check firmly before opening to see if the accuracy is accurate.
On the street TL 125 (JD06) Especially the front brake is ineffective - - - Even though I give up or change the Front around with the TLM Disc brake - - - JackKnife will also work as much as you can.
- I was afraid that I did not drive with the margin over the usual inter-vehicle distance - - - It will be able to run with an ordinary sense and the distance between the cars will be scared.
- In other impres, it seems to be crowing, but my early a little sounding but as soon as I ran, I became quiet to the extent that I almost never bothered.
- Direct feeling increased when the Brake was hooked, I was concerned about Brake Washer's growth and contraction, so I decided to exchange Brake Washer later.
- Like Drum brake hydraulic pressure to replace Fluid etc etc etc etc etc. It is easy and comfortable on Maintenance.
It is really recommended Brake Shoe because the price is not so expensive.