HONDA SH125desktop_pages_mt_index.motor_name_h1

HONDA SH125

SH series It became a full model change for a long time, 125cc scooter which appeared with the latest style and mecha.The engine is water cooled, carries eSP which is the latest global engine adopted for PCX and click, achieves low fuel consumption and environmental response.The space under the seat was also expanded, and the storability improved.Stability and controllability are advantageous by adopting the 16 inch wheel which is standard in Europe and the front and rear disc brake.A somewhat large body can also be said to be a dimension that optimally considered running, bending and stopping as a motorbike.It is a central model of the SH series that glows high usability and high basic performance.

Kapasitas Mesin 125cc
Horsepower Maksimum 14
Torsi Maksimum -
Berat Total 134kg
Kapasitas Tangki 7.5 Liter

144 Produk

Ulasan Produk

The attached state is good, but Chatter is too much and I can not see anything Mirror if I try to drive. Unfortunately I gave it. It is a recommendation for those who place importance on the appearance.

Image is Right Side is Master cylinderLever of Nisshin so it is 10 mm from 8 mm OEM.

The diameter of Mirror is also Large Tiny, Small is not too much Simple, I think that Pipe stay part is Black as well and I think that it is becoming KSR in a tight atmosphere.
Outer part and Inner (Mirror part) And I think that visibility is good because the adjustment range is wide because three parts of Bracket root, Mirror side root, Mirror and Outer part can move.. Outer and Inner (Silver Partial) There is no problem because the movable amount of Large is not so big, but other moves.
When running, there is a shake in my KSR. If we attach Weight on the inner side of the Bar End etc., the blurring may be solved a bit. It's not just feeling too cruel.

If you do not change Clutch or Brake lever, you need to change to 8 mm Type, change to 10 mm Type if you change.
↓10mm↓
https : / / www. webike. net / sd / 20365709 /

I think that the atmosphere can be confirmed because Right Side of the image is Mirror of Madmax and Left Side is OEM.
Both of the last one are from Madmax.
I am satisfied because Simple is cool and the price is cheap.

The shape and the quality are wonderful.
The price is cheap, but the shipping fee is higher.
It is around 400, but the shipping fee is 610 yen.

I flew away while driving, so if I was looking for anything good Mirror I bought the price of 500 yen with decisive factor!

With prices of other companies thousands of yen, because it is an exceptional price, if not expected at all, OEM Product. It is making!
It is 70 km vibration and the rear can not be seen because the OEM does not change anywhere outside, so we will exclude points subject to penalty points!

Previously, wrongly Opposite Thread ScrewSpec. The same shape Mirror made by D Tonna who ordered and can not be used (24 yen higher) Compared to the comparison, the make and shape are almost unchanged, the difference is that D tonna only comes with Fixing ScrewCover!

I am on the 87-year-old CUB. Because it is an old Motorcycle, only LeftMirror is attached, and I purchased two I thought that I want a cool Mirror if I can do it.
Firmly made, plating with luxury, there is no shake with vibration. Also, since the neck is fixed with Nut, it adjusts by moving the Mirror surface, so it is hard to get a helmet when getting off the car.
In general, I think that it is a very good product.

This product are totally superb. Fully satisfied to upgrade your motorcycle. Performance parts that will last longer.

It\'s so cute and match well with my motobike Mirror this can move inside it\'s amazing different for me and I like it // very very like