HONDA SH300i

It chose by appearance.
A portion black when grasping is collapse.

I have heard the reputation of this Plug, but I tried buying it to be handled by Webike.
So far as Watani's designation OEM DPR Gap 1. I adjusted it to 3 mm and used it. Ignition system and lighting and fans (Cause of voltage eating) And is completely processing Wiring is divided.
Even when I changed Igniter and Coil "Beauty is on fire" Although I was impressed with this, I will go further up when I put this in. The cloudy rush of about 5000 rpm from Clutch meat is like Silky, it seems that generations have gone lightly for about 10 years. I feel that my heart or exhaust smell has also decreased (Lol)
However, it is said that the introduction of Wotani SPll is the Large premise as minimum as Mr. Shimaba says from the import distributor. Horribly Gap is wide so fire will not fly in the same Coil.
If the fans turn around due to heavy traffic in the summer, there are many misfires → JR 8C installed, but ... If you want to enjoy drastic solutions and fine Feel, I recommend this combination.

Discovering the Spark plug that looks like the face on the product explanation screen of Wa Big who happens to be found. Regarding its use, this plug which encourages watani attachment to the ignition system. The purchase decided immediately for a car that meets the conditions! When looking at the real thing, Steel color which Blue took first gets an eye out. The center electrode of the tapping was NGK - Compared to DR8EA, it will be positioned more towards the center of the combustion chamber by 1 mm or more, which will increase expectations for combustion efficiency Up. However, looking at the details, I can not deny the feeling that it is more complicated to make than JAPAN's Plug. BALI of the center electrode and screw terminal type terminal are obviously off center. , I feel a little cheapness because I am watching JAPAN items with high precision from the usual. However, if you actually use it and have sufficient performance and durability, you can say that it is not necessary to request such parts that are not normally visible. I installed it immediately, but the exchange itself is exactly the same as regular Plug exchange and there is no particular problem. The accuracy of the Screw part seems to be a passing point. When I try to cover Plug cap, it is Fashion that Blue 's Steel color looks sharp. And Engine start! - - - That sounds exhaust sound from Mild something more than usual. Because it is a single cylinder, there is a place called Dododo, but it is called Toto. However, rather than being cheesy rather than luxurious - - -. Also, the warm exhaust gas Gas in the winter season has Gas smell, but it feels like it has been relaxed. Impression that Engine braking became Mild when I actually ran. I have stopped playing. Furthermore, Engine vibration seems to be decreasing. Since Cowl was wearing, engine oscillation was swaying the edge of Cowl, as it was Big Li after replacing the Plug, it became impossible to see it. It is feeling that the rise is also powerful though it is Mild. I am surprised that there is such a change with just one Plug. I ran about 20 kilometers, but I did not feel Minus factor. I would like to see the impact on fuel economy and the durability of the plug itself. It is limited to strong motorcycle of watani equipped car or ignition system, but it is recommended plug at the first impression.

Plus side : Price is cheap, around (grip) Soft, I think that it is good not to get stiff even in cold weather, individuals with many vibrations.

Minus surface : Grip becomes thick (About Grip heater included) So, for those who are Small in hands, depending on the angle of Handlebar, the thickness increases, Lever and Handlebar (Core of) There is a possibility that the thing may feel distant and it may be difficult to walk around so I think that the evaluation will break up.

Because my FUSION can not adjust the angle for Normal handle, I felt it slightly upward more than to Upright (Feeling holding down from above) became.
Because it is a Scooter which does not hold down even Positionally, the difference of several millimeters is sensuously pretty much Large.
Recommended for those who can adjust Handle position based on the thickness of Grip.

On the other hand, Direct feeling of Handlebar becomes thin, so I feel dull when I turn around.

As OEM designation of JAPAN Motorcycle in the 70 - 80's it is ProductNo familiar to middle aged like me. It is quite trustworthy in terms of quality. BMW's commitment is felt where you designate Type without resistance.

There is also an LED Lamp with a device for heat dissipation behind Valve, but there are cases where it can not fit in the Headlight case eventually, but since the back of Valve does not protrude, Valve will be in Beauty To fit in.

A bit thick, easy to use ♪ slippery and slim small grooves
I think that hands are hard to hurt even for a long time.
I also think I will purchase this Grip next.

เป็นปลอกแฮนด์ที่สวยมาก เนื้อวัสดุที่มีคุณภาพ การออกแบบที่ดี ขั้นตอนในการใส่เพียง 1-2 ขั้นตอนก็เรียบร้อย เหมาะกับการใช้งานที่หลากหลายทั้งทางใกล้และการเดินทางไกล ช่วยลดการสั่นสะเทือนในขณะขับขี่ กระชับเวลาเร่งคันเร่ง และสามารถทนต่อฝุ่นและน้ำโดยไม่ลื่นและเสื่อมสภาพ ผมใช้ในการเดินทางมากกว่า 500 กม ในครั้งเดียว และจะใช้ในการเดินทางไกลต่อไป It is a very handsome casing. Quality material Good design Step in just 1-2 steps to complete. Suitable for a wide range of applications both near and far. Reduces vibration while driving. Accelerated accelerator accelerator And can withstand dust and water without slipping and wear. I used to travel more than 500 km at one time and it is used to travel further. (translated by Google Translator)