Kembali ke atas

It is always putting in under the sheet for the emergencies at the time of touring.
Although he does not want to encounter the opportunity for this to play an active part ...

It exchanges simultaneously with a brake lever.
In play [ itself ] is the same as a brake lever.
However, since it is a little shorter than a pure lever, it is hard to do clutch operation for a while with three fingers.
Appearance is that which is said and is a three stars for the plus minus 0.

Order these grips for a Honda CBR1000f as per the listing but they are to short,I should have measured the old grips instead of trusting the listing so please check before you order.Nice grip otherwise.

It is used for Off-road motorcycle with Top case. There is another for Off, but because there is Screen at Touring SEROW, I made it for Large type Motorcycle here. This was the correct answer.

nice to replce with iridium spark plug in my honda xr. hope good perfomance with this plug. good quilty product.no issue with packaging

I have replace SKF fork seal for my CB400sf and it much better than the OEM. With it low friction design the fork move smoothly and even though it still remain good sealed from dust from outside and oil leak from inside. Highly recommended. Best

It is used for VFR 800 RC 46-2.
I am doing Fit to such an extent as an OEM.
Due to the thinness of the material, it is unknown what the durability is like.
So far, I am satisfied..

Hello. I bought this oil filter for my Yamaha YZF R1 2005. The package was well packaged, came, without any damage. The oil filter HIFLOFILTRO HF-303 was designed easily and without problems. The quality of the goods is as high as it should be. I will buy more. I recommend it to everyone. Do not regret that you buy it for your favorite motorcycle. I wish everyone good luck and success. Thank you .

Mounting on NS-1.

The same thing as this was attached when purchasing Motorcycle, but since Cable was disconnected, it was replaced.
Anyway Cable is thin! This is the most dissatisfied point.
I want to pay attention to breaking and pulling.

Since it can not turn off the power, the battery will run out quickly with keeping on.
As a matter of fact, replacing the battery is somewhat troublesome.

As a water temperature gauge, it is a cheap class, so it is recommended for people who place importance on COSPA, those who hand out the water temperature gauge for the first time.
Let's buy a high-grade water temperature gauge a little if there is gold and knowledge.

It is thinner than the thick product of LEAD Industry which I used to date.
Light, easy to carry and store.
Feeling that the molding fits RC 46 of VFR, it fits better to the car body than any Cover I used to date.
Although there is anxiety about the durability due to sheer thinness, it can not be said anything about it if the years have not passed.

It often takes a fingertip, it is very easy to handle.
Processing by ponding is absolutely nothing.
(^^) I will also upload photos of Clutch lever.

It will stop normally. With peace of mind, I can tour Tour this price.
I am satisfied.. I do not yet know the durability, but I think I will also purchase this item.

When we arrived, it was already floating from release paper.
It seemed that the adhesive strength was not 0 and the season was still hot, so I tried adhering to Tank in the meantime and then it will float after a while.
As another means, by holding down from above for a long time, I hope that the shape of Pad itself will become familiar with Tank, I will keep curing Tape from above and keep it familiar 2 months.
I thought that it would have become familiar with it and seemed to be sticking somewhat when removing the curing tape.
But. It floated on the next day.
If you leave it like this, you will scratch the painting of Tank if you get in dust, so you only have to peel off.
It is mere Large loss.

Since I used it for V-stron 650 before, it was very good Size feeling and use feeling so Repeat.
Purchase suitable CowlMirror Bracket Type for TMAX 530 as Size votes.

I see it almost when I try it (Lol)
The extent to which the surroundings of Seat and Screen are hidden.
I would like half of the car body to be hidden if possible (V - strom 650 was hidden halfway)

The original use is to prevent scratches from scratching the corners when directly hitting Bike Cover is not it?
If you go out so far and hit Cover from above it will scratch the horn and get scratches.
The original usage is a subtle feeling.
I used to patronize the V-strom 650 with dust avoidance because it is a covered bicycle parking lot,
Because I am not hiding half, I do not seem to avoid dust so much as I like to avoid dust.

Honestly failed...

I would like you to remove TMAX 530 from the adaptation column.

YZF-R1 (2013) In use.


As you can see in the item description, the color of the hole through which the key can pass is divided so it is hard to make a mistake in the front and back.
This is saved to the plain. Because it makes me feel like wasting my time just by making mistakes in front and back ...


Because the One-touch belt can pass under the car body this is also high point.
And Quantity : Pair (for Left and Right) Since both are removable, Quantity : Pair (for Left and Right) You can remove either side well on the wall without problems.


Also, as the lining is made of a soft material, whether it is harder to scratch than just Cover.


Compared to the Type with a through hole in Ring, Cable lock is hard to pass because it is a little Small to say it is stronger, but I guess it is useless because I'm singing Waterproof
As it comes with a carrying bag like it is, once you take it out of the box it's almost impossible to store it in that Size because there is also a lining relationship (Lol)
I think that it is better to put in other goods and make effective use.


Although it is stopped under the stairs, rain etc. rain etc etc. There is currently no flood at. Regarding durability, looking at the future ... is not it (Lol)

'