Kembali ke atas

Aprilia RS125 MY08 Although IW01-31 (an equivalent for NGK No. 10) is usually used for racing chamber specification, only a winter season raises the main jet No. 1, and is using IW01-29 (an equivalent for NGK No. 9).

He bought it for kitaco VM26 setting.
Worrying is also pleasure.

When installing on SEROW 225-3 rw 1, you can not go inside the Caliper unless you scrape Pad 3 or more.
It seems there are no problems with other impresses, so I think whether there are variations in the product.

I am going to ask PRO for troublesome work.
Brake Pads of owned Motorcycle is also regrettable because it was product of KITACO company and there was no defect.

【What made you decide the purchase?】 Short lever is expensive but it is inexpensive and short.
【How was it actually used?】 It fits neatly into the Pud Guard of Mad Max and does not interfere as tailored.
【Was it difficult to install? (Hard parts case)】 I was able to install it normally.
【Please tell me the point of installation and hang (in the case of Hard parts)】 nothing special.
【Fit feeling and height when wearing - Please tell me the weight etc (Apparel case) 】Any
[Is there anything I was disappointed about?] nothing special.
【Hope for Manufacturer - Please tell me if you have any improvement points】 It's light and it's a nice feeling. It might be better if there is Black Lever.
【Have you compared items?】 KITACO ShortReachLever 6,276, Mad Max 680
[Others] Any

250 cc Front - Although I use both Rear, "easy to handle" I think it is a word of. Brake hose is NORMAL. Brake fluid belongs to elf.
It does not mean that the braking force is quite good. Exactly the expression that you stop only for a while holding Lever. Very easy to handle.
The first handiness is felt when speed is being adjusted while applying Rear brake at low speed.
It is easier to control the speed, so I feel that there is less flattering.
If you write like this, you may feel that Brake's effect is weak, but if you grasp it, it will stop firmly.
It is Pad that I highly recommend to those who touring the tokotoko and downtown rather than people like GunGun attacking Circuit and Pass etc..
Quantity : 1pc. The picture of the eyes is the Front which ran about 1000 km after installation. The second piece is Rear as soon as it is worn. (After running on a rainy day, please do not worry about dirt ...)

It has nothing to do with the performance of the product, but the sticker attached with extra was a bit dirty. This may be the Point you care about some people haha ??haha

I exchanged from OEM. As a performance I felt a bit better than OEM. It is very effective, I feel that the adjustment range is larger than the OEM, I am very happy

It is clearly more effective than the OEM when you use it with Circuit, and Control property is almost the same. I think it depends on Tire, but I think that compatibility with BS S20 Evo is very good. We do not know well because aggressiveness to Life and Rotor is just beginning to use.

? 【What made you decide the purchase?】
Price and Control Performance

? 【How was it actually used?】
Brake performance is also not bad. Supplied more than Golden Pad

? 【Was it difficult to install? (Hard parts case)】
I am motivated even by a beginner with hang.

? 【Please tell me the point of installation and hang (in the case of Hard parts)】 Any
- Caliper (Where Brake Pads is paying) Piston (Things to press) Push in.
- Please hold Brake until you surely come back several times after the end. When I started running and took Brake
Because it does not take Brake if it is fluffy.

? [Car type / Mounting position】
Ninja250R Front brake

? [Is there anything I was disappointed about?]
nothing special

? [Request to Manufacturer - Please let me know if you have any improvement points]
I think that this is fine as it is a complete form. Continue production desirability in the future

? 【Have you compared items?】
Golden Pad - Hyper pad

? [Others]
Especially Motorcycle beginners think that it is very good. Brake performance and control performance
I think Balance is good..
More than anything, it is good that Disc Lock is hard to wear out.
Somewhat anxious, I wonder if Brake Pads' scraped squeeze is a little somewhat easy - - It is slightly dirty.

that's all.

I exchanged more than Redpad of the company ... I felt that there was a sense of bitterness from the beginning than RedPad. RedPad feels softer feeling when I grabbed Lever.
I felt this Pad a hard Touch.
Personally I like this hard pad because I like hard Touch.
I do not know yet about Life, but I think that it is not a problem because it is cheap.

Brand! Lineup which is cheaper and more reliable than other products Also abundant! Thank you for always taking care of me.
It is mainly used for two-stroke vehicles, but a small amount (Used up) I'm glad that the liquid Gasket comes with ~ ♪

Wiring is required for Oil drain bolt and Oil Filler Cap when traveling Circuit, but since hole for passing Wire to Bolt is opened, we thought about the future and replaced it at the same time as Oil exchange. The colors were Blue and Titanium, but I chose Titanium. As a precautionary point for installation, Bolt is a material : Because of Aluminum, Bolt breaks easily if you tighten it too tightly.

Previously I used Vesla.
Anyway the effect starts late.
Smoothly speaking,
I did not want myself to want to hear it as a gut.

【What made you decide the purchase?】 The price is cheap. Front should be high and Rear will not work so far so select cheap one.
【How was it actually used?】 It is the first impression that this degree. If you stepped on strongly, it works, and if you are stepping on sweetness it does not work at all, I feel impression.
【Was it difficult to install? (Hard parts case)】 Just remove the pad and attach it!
【Please tell me the point of installation and hang (in the case of Hard parts)】 Let's loosen Pad pin before removing Caliper.
【Fit feeling and height when wearing - Please tell me the weight etc (Apparel case) ]
[Is there anything I was disappointed about?] Brake Kasu gets awesome. Just like Rear wheel's Right Side, it's black like stupid. Is wear also quick?
【Hope for Manufacturer - Please let me know if there are any improvement points】 I think this product is a nice place because there is such a standing position with this product.
【Have you compared items?】 It is GoldenPad. I regret something good even though I made it.
[Others] Speaking of red as you can see it is dasy.

【What made you decide the purchase?】 I thought that I would like to use Project mu's Brake Pads, so I bought it at the same time as Rotor exchange.
【How was it actually used?】 It's a nuffy and effective impression when you hold Lever. Nevertheless, smoothly, Linear, Brake fee with no sense of twist like OEM Ring Ring. I think it's wonderful.
【Was it difficult to install? (Hard parts case)】 Just remove the Caliper, wash it, install it after cleaning!
【Please tell me the point of installation and hang (in the case of Hard parts)】 Let's loosen Pad pinBolt first before loosening Caliper installation Bolt. If I do not do this, I do not need the force and I think that Pad pin is hard to remove.
【Fit feeling and height when wearing - Please tell me the weight etc (Apparel case) ]
[Is there anything I was disappointed about?] There is nothing in particular.. I do not know about durability yet.
【Hope for Manufacturer - Please let me know if there are any improvement points; because it comes with Carbon in the product name, it can not be used for CarbonRotor in the explanation column for Stainless rotor. May I have a note written in a word?.
【Have you compared items?】 It is Sintered by DAYTONA, but I quit immediately..
[Others] Let 's make exchange in the future to be around PRO mu!

I tried constructing an Engine using this Set's Gasket ...
Piston caught a Gasket and it was useless
Since it can probably be used other than Head Gasket, maybe there is only it there?

'