Kembali ke atas

It chose by appearance.
A portion black when grasping is collapse.

เป็นอุปกรณ์ที่ออกแบบได้สวยงาม ทั้งวัสดุและสีสัน สามารถติดตั้งได้งานด้วยตัวเองในเวลาอันสั้น และสามารถใช้ได้กับรถหลายรุ่น โดนแสดงแอกถึงประสิทธิภาพอย่างชัดเจน ทั้งการติดเครื่องยนต์ที่ง่ายขึ้น การขับขี่ทางไกลด้วยกำลังเครื่องยนต์ที่ดีขึ้นอย่างเห็นได้ชัด และการครอบของหัวเทียนมีความแน่น สามารถป้องกันน้ำหรือผุ่นละอองได้เป็นอย่างดี It is a beautifully designed device. Materials and colors Can be installed manually in a short time. And it can be used on many models. Show the yoke to clear performance. The engine is easier. Long-distance driving with noticeably improved engine power. And the cover of the spark plug. Water resistant or dustproof. (Translated by google translation)

We are attached to VTR 250. I also added a hand guard at the same time, so I do not know yet, but the fastest speed fell a bit. I expect that it will become warmer, remove the hand guard and extend the maximum speed.

I attached it to RS of Est. Headlight Because the outer diameter is a little small, I put it on the outside of Bracket with Color in between. As Nut's burntness becomes shallow due to Color, we changed Bolt to 5 mm longer.
I can not expect much windbreak effect, but I like the appearance and change I like it.

Plus side : Price is cheap, around (grip) Soft, I think that it is good not to get stiff even in cold weather, individuals with many vibrations.

Minus surface : Grip becomes thick (About Grip heater included) So, for those who are Small in hands, depending on the angle of Handlebar, the thickness increases, Lever and Handlebar (Core of) There is a possibility that the thing may feel distant and it may be difficult to walk around so I think that the evaluation will break up.

Because my FUSION can not adjust the angle for Normal handle, I felt it slightly upward more than to Upright (Feeling holding down from above) became.
Because it is a Scooter which does not hold down even Positionally, the difference of several millimeters is sensuously pretty much Large.
Recommended for those who can adjust Handle position based on the thickness of Grip.

On the other hand, Direct feeling of Handlebar becomes thin, so I feel dull when I turn around.

A bit thick, easy to use ♪ slippery and slim small grooves
I think that hands are hard to hurt even for a long time.
I also think I will purchase this Grip next.

เป็นปลอกแฮนด์ที่สวยมาก เนื้อวัสดุที่มีคุณภาพ การออกแบบที่ดี ขั้นตอนในการใส่เพียง 1-2 ขั้นตอนก็เรียบร้อย เหมาะกับการใช้งานที่หลากหลายทั้งทางใกล้และการเดินทางไกล ช่วยลดการสั่นสะเทือนในขณะขับขี่ กระชับเวลาเร่งคันเร่ง และสามารถทนต่อฝุ่นและน้ำโดยไม่ลื่นและเสื่อมสภาพ ผมใช้ในการเดินทางมากกว่า 500 กม ในครั้งเดียว และจะใช้ในการเดินทางไกลต่อไป It is a very handsome casing. Quality material Good design Step in just 1-2 steps to complete. Suitable for a wide range of applications both near and far. Reduces vibration while driving. Accelerated accelerator accelerator And can withstand dust and water without slipping and wear. I used to travel more than 500 km at one time and it is used to travel further. (translated by Google Translator)

I am interested in the number of impressions and evaluation and purchased. It sounds like a hard grip, but I felt the impression that vibrations are hard to be transmitted. I thought that vibration would come directly if it was stiff, but I was surprised that it decreased.

Almost like American!
I also have weight, and I am satisfied because it is not so expensive as to price!
With JOKER Helmet you can come up with astringency!

If the Plug is a consumable item, even a Cable consumable. Planned for replacement at plug replacement. If you replace it with Dress-up to make it Red, because it's Sale.

Already, Ignition Plug can only do this. The accuracy of the goods is solid, stable Spark. I am relieved to use it..

I bought it for GOOSE 350. I can install without problems and I can not expect a lot of clear flow effect, but I think that I have matched GOOSE's Design. I am satisfied with the texture.

Taylor made plug code was temporarily used for Watani SP 2, so it was changed and replaced. This time I installed it using the watani terminal. Both cord diameters are 8 mm, but Taylor excels at suppleness. However, because the boots attached to the terminal are pretty awkward, wear it here. When peeling the silicon coating, the fiber layer inside played a good role and it was able to process cleanly. Because the cord is solid, it is better for the 4-cylinder car to decide the length adjustment severely. The plug cap is soft with silicone, waterproof is perfect? ??The attached terminal is also kind. Besides this, a connection joint is also included. When I started the engine, I could not feel the difference clearly, but it's probably something like that. I reconfirmed that the plug and code are safe with NGK. This time chord black with both code and cap. It seems that it is cool, unexpectedly even with four old air-cooled 4 shots. I would be happy if it is a little cheaper, but from the texture it will not be high. It is recommended..

Also attached to Honda SL 230. I chose long Screw at Home center for installation, it is about that. You can also feel the rectification effect. I'm looking forward to the touring. I will post the image, I hope that it will be helpful to everyone.

Great looking grips, they fit perfectly on my 2005 SR400. Really well priced too so great bang for buck. They are fit on in about ten seconds and provide a nice grip and comfort. I can highly recommend this product!

'