? 【What made you decide the purchase?】
Reliable Brand's NGK. Plug is also NGK so I think that compatibility is also Large.
? 【How was it actually used?】
Motorcycle is old, I feel that Torque has improved in general. Power comes with Axel.
? 【Was it difficult to install? (Hard parts case)】
Work to uninstall Tank and Radiator to remove Ignition coil was quite troublesome. Once you remove the Ignition coil, the code installation work is relatively easy.
? 【Please tell me the point of installation and hang (in the case of Hard parts)】
I straightened this cable from the root of the OEM's Plug cord from the Ignition coil, so I had the power to screw it into the Ignition coil because it was thicker than the OEM code.
? Fit feeling and height when wearing - Please tell me the weight etc (Apparel case) 】Any
? [Is there anything I was disappointed about?]
There is no particular problem.
? [Request to Manufacturer - Please let me know if you have any improvement points]
I would like you to match the thickness of the approximate OEMPlug cord.
? 【Have you compared items?】
Norogy's Hot wire
Confirmation and adjustment are necessary so that the amount of Oil and the amount of fuel do not become thin as much as the combustion efficiency improves.
It took the Engine to the KICK 2 or 3 times, but after mounting it was almost one shot ok became the most effective!
I could not really feel the effect like the item description of Others, but I feel like I'm feeling somewhat better with a feeling of being?
Afterwards, the appearance is exchanged in any way It is good that the feeling is strong.
Strictly speaking, if you cut the OEM code according to the instructions, the position of the Connecting Connector will be in a difficult position to restore, so I thought that it would be better to do it in the field.
To be honest, I think that there are many people who can not step on Nakanaka exchange with concern about leaking,
With NGKPower cable, since Normal cord and thickness do not change so much,
You can change it directly from Coil.
Since the Plug has also been changed along with the code,
I do not know which effect is, but Engine came to Smooth,
Torque also rose slightly.
Also, it looks nice.
It is recommended for old Motorcycle.
CROSSCUB is 60 km / It is hard to raise engine rotation per h. I could not enjoy imaichi running with a sound that looks like a clogged exhaust. I changed my Exhaust System, perhaps it would be better, but I was worried that the exhaust sound was absolutely bad, but I found this item.
As the name implies, the Power Silent Oval Exhaust System is an exhaust system that combines power up and quietness. Engine Torque itself is the same as NORMAL, but because of the better exhaustion of the Exhaust System, it makes it easier to run fast flowing Bypass, etc. without Stress until high revolution, while giving a good crisp sound of the Veyen Was.
And it is noteworthy that the quietness of the exhaust sound. I purchased MORIWAKISlip-on SilencerMX back to the OEM without being able to withstand the Level saying that such a noisy though it is approved by the government, but this is genuineness quietness. Although it is truly a little bigger than OEM, it can be likable with calm sound without intimidating feeling.
As its name suggests, it is an elliptical Exhaust System that looks as if it looks Large from the side, but it does not jump out laterally as it looks from behind and it fits in the Compact.
When installing Axle Shaft's Nut (M19) Rear Suspension Top Nut (Replace M14 Cap Nut with attached M21Nut) Exhaust pipe installation Nut (M12) Since it is necessary to remove and reinstall it, Torque wrench is indispensable to prevent over tightening. However, when using Torque wrench of Box wrench type, if you do not use Long Type only for M21, you can not tighten up to reach deep and be careful. Spanner type may be better.
Others, exhaust gas from two split Exhaust pipe joints Heat resistant Liquid Gasket to prevent leakage, Stainless Steel Band joining Exhaust pipe and Exhaust System Bolt to prevent burn-in Rib Ten Grease, If you do not do it, you will regret it.
In the later Pannier case, put something you do not want to wet, this Vietnam Carrier can put Rain jacket that can not be dried, wet bathing suits, Running Wear, muddy shoes, etc. It is convenient for Large change.
However, when Pannier case is attached, ride - This carrier is quite disturbing because I can not turn the foot when getting off backward. I am installing it only during Touring.
In addition, it seems that the delivery date will take about one month, so it is good to order early.