The presscab was attached and used.
HI and LO switch became reverse that that of normal was used for the socket as it was.
I think that light diffuses and the focus does not suit and that a valve position probably passes in a front.
It seems that an attached bulb is the best for a normal light.
After all, it is high shopping.
Z125 PRO with Endurance Rear carrier, 30? Top Case (K-MAX) I'm attaching.
It was Exactly with this Size Cover.
Both Front and Rear have a hole through which Chain lock passes, which is useful..
Belt for flapping prevention comes with 1 pc.
I think that it is good to purchase additional Belt when it is worrisome to look at the situation.
Bore up C50 CUB and install Normal muffler, low price Sports Exhaust System!
NORMAL does not stretch high rotation and the Sports Exhaust System is noisy, so this Exhaust System
I made a choice..
Although the appearance of the product is beautiful, is it because of the slender body as a whole? Because somehow is light, the internal structure
I feel uneasy about durability.
Small hole that seems to drain is not in the center part, the hole under the exit is misaligned.
In installation, the flange part is sloppy and the length of Bolt is Limit, but if you cut it by about 1 mm
Gasket can also be installed, without buffering KICK and Brake, safely
Installation complete. By the way, Bracket used NORMAL.
Volume is slightly larger than NORMAL when Idling, but after that it is a quiet Exhaust System which is the same as NORMAL.
? 【What made you decide the purchase?】
Reliable Brand's NGK. Plug is also NGK so I think that compatibility is also Large.
? 【How was it actually used?】
Motorcycle is old, I feel that Torque has improved in general. Power comes with Axel.
? 【Was it difficult to install? (Hard parts case)】
Work to uninstall Tank and Radiator to remove Ignition coil was quite troublesome. Once you remove the Ignition coil, the code installation work is relatively easy.
? 【Please tell me the point of installation and hang (in the case of Hard parts)】
I straightened this cable from the root of the OEM's Plug cord from the Ignition coil, so I had the power to screw it into the Ignition coil because it was thicker than the OEM code.
? Fit feeling and height when wearing - Please tell me the weight etc (Apparel case) 】Any
? [Is there anything I was disappointed about?]
There is no particular problem.
? [Request to Manufacturer - Please let me know if you have any improvement points]
I would like you to match the thickness of the approximate OEMPlug cord.
? 【Have you compared items?】
Norogy's Hot wire
Confirmation and adjustment are necessary so that the amount of Oil and the amount of fuel do not become thin as much as the combustion efficiency improves.
I have not tried Plug replacement, etc. until now, it will be a perfect foster age and, on the contrary, I want to do various things by myself Today is around this time. I hope changing it after all. I feel good with a single shot start. My attachment also comes to Motorcycle more. When you do it, whatever you face is white Do not you think?. Correct Brand is the correct answer.
Хорошо и плотненько наделись, рукой прикасаться приятно, выглядят стильно (для тех кто не любит пестрости а больше склоняется к строгим класическим цветам) Вообщем покупкой доволен, рекомендую! Google translate: Well and densely put on, hand to touch nice, look stylish (for those who do not like variegated and more inclined to strict classical colors) In general, the purchase is satisfied, I recommend!
It took the Engine to the KICK 2 or 3 times, but after mounting it was almost one shot ok became the most effective!
I could not really feel the effect like the item description of Others, but I feel like I'm feeling somewhat better with a feeling of being?
Afterwards, the appearance is exchanged in any way It is good that the feeling is strong.
Strictly speaking, if you cut the OEM code according to the instructions, the position of the Connecting Connector will be in a difficult position to restore, so I thought that it would be better to do it in the field.
It installed in SUPER CUB 90Custom.
Although it is also in Review of the other person, it interferes with Brake Arm.
Although I could install without interfering if I bent Bracket and Exhaust pipe by hand slightly, but one anxiety remained.
Large stands as it is with Center Stand, but it also interferes somewhat like this when parking in Center Stand.
If you do not remove Center Stand, I think that parking with Side Stand is as good as possible.
Is it reasonable to think at this price.
If you say the perfect ones, say, Recommendation of another company's Exhaust System.
It is being installed in the 2007 formula CUB 90 DX.
【What made you decide the purchase?】
Dumping Adjustable point
【How was it actually used?】
Spring is somewhat soft, but Cover is done with Dumping adjustment.
I used four kinds of Rear suspension of Other Company Product, but I feel that it is the most balanced product.
There is a depth of pocket where you can cooperate steadily on the street and pass. By being able to adjust Dumping, I was able to find a point that I am comfortable with.
City riding : Good step and gap absorbability and convergence are good
Pass : The Plus, you can enjoy Corner with a sense of high ground feeling without feeling of stiffness and uneasiness that was made by other companies.
【Was it difficult to install? (Hard parts case)】
Personally it is easy. Because CUB has Center Stand, I did not feel any difficulty.
【Please tell me the point of installation and hang (in the case of Hard parts)】
Although it is natural, although it is easy to install, the handling Instruction Manual let's work after reading with chitin.
A sharp point on the Aluminum Cut-out part (Initial adjustment section) There is a problem, injury requires attention.
[Is there anything I was disappointed about?]
There is none. Quality of products themselves are also Large and Changeless.
【Hope for Manufacturer - Please let me know if you have any improvement points]
If you offer Springs with different firmness separately, I'm happy I am happy..
【Have you compared items?】
330 mm made by SHIFT UP
ModernWorks 325 mm
YSS Top Top 340 mm
SP Takegawa Aluminum Cut-out 325 mm (Dumping unadjustable type)
Although SHIFT UP made cheaply but it is also difficult to throw away, the military feathers went up in this time made by Mukawa for the dumping adjustment possible.