Kembali ke atas

The attached state is good, but Chatter is too much and I can not see anything Mirror if I try to drive. Unfortunately I gave it. It is a recommendation for those who place importance on the appearance.

【What made you decide the purchase?】
To Exhaust System for Replacement

【How was it actually used?】
There was also a case where the Gasket surface was leveled once and used in combination with liquid Gasket once, but it was used ...
I am glad I bought it this time
OEM Gasket was doing something that was impossible to collapse
Is it because it is JA 10, is it individual differences ...
I do not know but when exchanging the exhaust system with JA 10 it is essential to replace Gasket
Not very, but OEM is not reusable

About 30 units of motorcycle have been transferred, but I saw this severe condition for the first time

【Was it difficult to install? (Hard parts case)】
Replace only

【Please tell me the point of installation and hang (in the case of Hard parts)】
It is easy to paint liquid Gasket when installing
Since it falls poignly as it is, it is a measure to eliminate the leakage instead of adhesive + just in case

[Is there anything I was disappointed about?]
nothing special
【Hope for Manufacturer - Please let me know if you have any improvement points]
nothing special
【Have you compared items?】
nothing special

Image Quantity : 1pc. Eyes are this KITACO company Gasket
It is the OEM Gasket which was originally attached with the second image

Recommended for exchanging the Exhaust System with Tire replacement
The surface is also rattled, it is crushed and it is crushed, OEM can be reused, it seems that the exhaust leaks ...

Image is Right Side is Master cylinderLever of Nisshin so it is 10 mm from 8 mm OEM.

The diameter of Mirror is also Large Tiny, Small is not too much Simple, I think that Pipe stay part is Black as well and I think that it is becoming KSR in a tight atmosphere.
Outer part and Inner (Mirror part) And I think that visibility is good because the adjustment range is wide because three parts of Bracket root, Mirror side root, Mirror and Outer part can move.. Outer and Inner (Silver Partial) There is no problem because the movable amount of Large is not so big, but other moves.
When running, there is a shake in my KSR. If we attach Weight on the inner side of the Bar End etc., the blurring may be solved a bit. It's not just feeling too cruel.

If you do not change Clutch or Brake lever, you need to change to 8 mm Type, change to 10 mm Type if you change.
https : / / www. webike. net / sd / 20365709 /

I think that the atmosphere can be confirmed because Right Side of the image is Mirror of Madmax and Left Side is OEM.
Both of the last one are from Madmax.
I am satisfied because Simple is cool and the price is cheap.

MONKEY External system used outside for exchanging.
Previously, I used items of this Series many times in other models and confirmed the confirmed, so I chose without hesitation.
Immediately after installation ~ 1 month, there is no problem at all.
As Gasket, we recommend that you exchange every time.
It is a piece to keep in tool box.

As the Exhaust System is planned in the middle of March, it is often a pre-investment for the time being. I also have a model and I want to replace the Exhaust System as soon as possible. Is Gasket removal tool necessary, too?

The shape and the quality are wonderful.
The price is cheap, but the shipping fee is higher.
It is around 400, but the shipping fee is 610 yen.

It is a normal Exhaust Gasket. Because there is a fear of exhaust leakage also for reuse, I try to exchange as much as possible new. When exchanging, make sure that there is no old Gasket left on the Head side. OEM GasketQuantity : 1pc. You can buy two sheets at the price of. Cost performance is good, making is solid as well.

When I exchanged the Exhaust System I purchased it under Gasket.

After all the new Gasket is good ~

I firmly touched the new exhaust system properly and it feels good!

I bought it for attaching an external exhaust system to DREAM 50. There is no exhaust leakage and it can be used without problems.
I think that the price is also cheap. Quantity : 1 Set of 2pcs. It was also good personally to be able to use it exactly.

Although I bought another company's Gasket and wrote it in the conformity table, I saw a little painful eyes that Size goes around Large one time, but as I thought it was a suspicion, the previous use of Gasket was still mentally good I bought this Gasket by betting.
Win a superb bet. Apparently, the ExhaustSize of the CUB Engine seems to be a large body together (It may not be possible to say unconditionally as it may be different depending on the year)
The price is also cheap, and there seems to be no exhaust leak. relieved.

I used it in CUB. It's an ordinary Exhaust Gasket. There is no problem for use. After checking 3000 kilometers we checked but there were no tears or bruises. It is a reliable product.

I flew away while driving, so if I was looking for anything good Mirror I bought the price of 500 yen with decisive factor!

With prices of other companies thousands of yen, because it is an exceptional price, if not expected at all, OEM Product. It is making!
It is 70 km vibration and the rear can not be seen because the OEM does not change anywhere outside, so we will exclude points subject to penalty points!

Previously, wrongly Opposite Thread ScrewSpec. The same shape Mirror made by D Tonna who ordered and can not be used (24 yen higher) Compared to the comparison, the make and shape are almost unchanged, the difference is that D tonna only comes with Fixing ScrewCover!

I am on the 87-year-old CUB. Because it is an old Motorcycle, only LeftMirror is attached, and I purchased two I thought that I want a cool Mirror if I can do it.
Firmly made, plating with luxury, there is no shake with vibration. Also, since the neck is fixed with Nut, it adjusts by moving the Mirror surface, so it is hard to get a helmet when getting off the car.
In general, I think that it is a very good product.

Exhaust System Gasket that needs to be replaced every time it is exchanged or desorbed. I chose Manufacturer which is cheap but small enough to be safe. Thanks to that there are no exhaust leaks at all, I am enjoying Motorcycle life with confidence.

When I exchanged the Exhaust System, I also wanted to use Gasket for new items
The price is also reasonable and we will recommend the purchase together when exchanging the Exhaust System