It was used for the monkey of normal (49 cc).
Although changed from the high cam of JUN, it says clearly and Power is completely different! Although it is natural, that Power of the high rotation area went up also has the torque in an inside rotation region rather than a JUN cam, and it rides easily by a torque fully.
of course, the maximum high speed is also extended!!! being related with setting of a carburetor -- the time of the influence of important effectiveness, or a JUN cam -- # -- it fell about by ten.
In attaching, it was a little troublesome that valve recess processing of the piston had to be carried out for reservation of valve clearance, but Power who wipes out the difficulties was obtained ^^
I use this kit with a combination of CR-mini and Mukawa ZStyleExhaust System Type 2 Exhaust System.
It will turn without Stress until 12000 rpm. There is also Torque from low rotation, it is feeling that it is easy to get on and fast.
Clutch is not sliding on NORMAL and needs strengthening. Because I did not want to change Normal clutch cover I am using 3-type of Mukawa river, but I start to slide slightly when I chase.
Every time I replace Motorcycle, I am doing it.
Oil cap around the Engine is also Black this time, I replaced it for Gold though it was one point
Every time it leaves it on the trade-in car and leaves it at hand only increases Normal oilCap (Lol)
Installation and so on are easy task of changing from Normal cap to Gold (Lol)
After all Gold is shining in black
Up to now Nore cam & Spring Bore Up Kit + JetSetting and Limiter cutSpec.. The troubles with abnormal vibration of ValveSurging and awkward output characteristics were solved like a lie. Once there is a DAYTONA 75cc Bore Up Kit compatible product, but there is also a cheap Made in Taiwan88cc Bore Up Kit so far it has neatly turned upwards and the feeling of shaky going out has also disappeared. Durability is currently being confirmed at around 300 km per month with commuting + short touring one month. It is nice that Cam and Valve Spring are packaged together. It is saved to reduce one troubling Masching trousers.
When removing SUPER CUB's Clutch, Lock nut has a special shape, so Wrench also required special items. There were also Wrench with different upper and lower Size, but this time I only remove Clutch so I bought Wrench made by DAYTONA which has only one Size
After fixing Clutch with Pulley holder, I could easily turn it by loosening Nut using Lock Nut Wrench. There is only a special tool and meshing with Nut is enough
It will not start without this tool to remove Clutch. Some of them are self-made Wrench, but people who can not buy it obediently
? 【What made you decide the purchase?】
Reliable Brand's NGK. Plug is also NGK so I think that compatibility is also Large.
? 【How was it actually used?】
Motorcycle is old, I feel that Torque has improved in general. Power comes with Axel.
? 【Was it difficult to install? (Hard parts case)】
Work to uninstall Tank and Radiator to remove Ignition coil was quite troublesome. Once you remove the Ignition coil, the code installation work is relatively easy.
? 【Please tell me the point of installation and hang (in the case of Hard parts)】
I straightened this cable from the root of the OEM's Plug cord from the Ignition coil, so I had the power to screw it into the Ignition coil because it was thicker than the OEM code.
? Fit feeling and height when wearing - Please tell me the weight etc (Apparel case) 】Any
? [Is there anything I was disappointed about?]
There is no particular problem.
? [Request to Manufacturer - Please let me know if you have any improvement points]
I would like you to match the thickness of the approximate OEMPlug cord.
? 【Have you compared items?】
Norogy's Hot wire
Confirmation and adjustment are necessary so that the amount of Oil and the amount of fuel do not become thin as much as the combustion efficiency improves.
It took the Engine to the KICK 2 or 3 times, but after mounting it was almost one shot ok became the most effective!
I could not really feel the effect like the item description of Others, but I feel like I'm feeling somewhat better with a feeling of being?
Afterwards, the appearance is exchanged in any way It is good that the feeling is strong.
Strictly speaking, if you cut the OEM code according to the instructions, the position of the Connecting Connector will be in a difficult position to restore, so I thought that it would be better to do it in the field.
I use it in REBEL. We expect to shorten warm-up time and improve fuel economy, install. From the conclusion, there is not any change!. Up to now we have gotten nearly 100 Motorcycle and Iridium plugs were put in most of them, but this is the first time that nothing changes. However, since it is Motorcycle running 50,000 kilometers at the time of introduction, I am expecting the performance improvement from now on!
Rather than seeking the Bore up speed from NORMAL to 75CC, the two-step Right fold and the departure from the 30KM limit
It's a short walk solely comfortable, not going to long distance Touring exclusively.
It is not difficult to install, but troublesome laborious and troublesome hands also become dirty Shop to ask for replacement Replacement fees high
If you like machine tactile, plastic model or radio control, you can enjoy it.