755 Produk

Produk Terbaru

Produk Rekomendasi

Ulasan Produk

Since oil change time came, it purchases in order to also exchange filters simultaneously.
I wanted red ....

I made this Filter the same as last time in the third Oil exchange.
Filter wrench is not required, there is no new expense, even in terms of performance
Since I could use it without problems, I would like to repeat it in the future.

I thought that it could be cheap at with Magnet, purchased, nothing was Paint on the exterior It was good at Simple
Since the tightening Torque is stated in the OEM, I watched it and installed it, but the next time I need to look it up
MT07 was 15 Nm

OEMValve surprisingly deteriorated severely, I chose this product of Heat sinkType from Large change high performance using other Manufacturer's LED Bulb with other two wheels.
Although Rear's Rubber cover requires a little processing to install, it is not a big problem.
Since Heat sink is exposed under the Fender behind the heat dissipation in the summer, there is no Trouble.
Depending on Manufacturer, it was said that there is a problem with quality, but there is no such worry.
There is no problem with riding the light almost every day at work without problems.

Oil Filter is exchanged periodically, but performance is not problem at all.
Also, as long as it functions as a filter, Manufacturer thinks it is unnecessary to keep in mind.

I will tell you the feeling of use outdoors without a roof.
We are calling for less invasion of rainwater and I did not expect it until Completely Waterproof.
However, since it is a two-layer structure of outer material and lining, soaked rainwater enters between the layers, eventually the Motorcycle also gets wet to the bisho-basho.
In addition, the rainwater that enters does not dry easily because it does not touch the outside air or sunlight between the fabric and the fabric.
With this price at nearly 30,000 yen price, I regret very much that I purchased it.
With this, Che Che Co Cover was enough.
Those who think to use outdoors without a roof, I think that it is better not to be bought absolutely.
As I just started using it, I will review additional durability at a later date.

When we arrived, it was already floating from release paper.
It seemed that the adhesive strength was not 0 and the season was still hot, so I tried adhering to Tank in the meantime and then it will float after a while.
As another means, by holding down from above for a long time, I hope that the shape of Pad itself will become familiar with Tank, I will keep curing Tape from above and keep it familiar 2 months.
I thought that it would have become familiar with it and seemed to be sticking somewhat when removing the curing tape.
But. It floated on the next day.
If you leave it like this, you will scratch the painting of Tank if you get in dust, so you only have to peel off.
It is mere Large loss.

How much iron powder etc on Magnet etc. I'm not sure whether it is adsorbed, but with Filter + Alpha this price has a sense of security and sense of security. We will continue to use it in the future.