OEMValve surprisingly deteriorated severely, I chose this product of Heat sinkType from Large change high performance using other Manufacturer's LED Bulb with other two wheels.
Although Rear's Rubber cover requires a little processing to install, it is not a big problem.
Since Heat sink is exposed under the Fender behind the heat dissipation in the summer, there is no Trouble.
Depending on Manufacturer, it was said that there is a problem with quality, but there is no such worry.
There is no problem with riding the light almost every day at work without problems.
I will tell you the feeling of use outdoors without a roof.
We are calling for less invasion of rainwater and I did not expect it until Completely Waterproof.
However, since it is a two-layer structure of outer material and lining, soaked rainwater enters between the layers, eventually the Motorcycle also gets wet to the bisho-basho.
In addition, the rainwater that enters does not dry easily because it does not touch the outside air or sunlight between the fabric and the fabric.
With this price at nearly 30,000 yen price, I regret very much that I purchased it.
With this, Che Che Co Cover was enough.
Those who think to use outdoors without a roof, I think that it is better not to be bought absolutely.
As I just started using it, I will review additional durability at a later date.
When we arrived, it was already floating from release paper.
It seemed that the adhesive strength was not 0 and the season was still hot, so I tried adhering to Tank in the meantime and then it will float after a while.
As another means, by holding down from above for a long time, I hope that the shape of Pad itself will become familiar with Tank, I will keep curing Tape from above and keep it familiar 2 months.
I thought that it would have become familiar with it and seemed to be sticking somewhat when removing the curing tape.
But. It floated on the next day.
If you leave it like this, you will scratch the painting of Tank if you get in dust, so you only have to peel off.
It is mere Large loss.
It is cheerful that it does not become a thing compared to OEM! It is cheap if you get this view at this price. However, as for the LED, it seems that Rose attachment tends to occur at the irradiation angle of Light, and as soon as it was installed it was upright condition even for low, so we asked Honda DREAM to adjust the optical axis. If you are thinking about HID conversion, you may consider trying LED production first.
Since it is like PB of Wei Big, I am not worried about the performance etc, and if I am concerned with Racer, I may be concerned about the performance side, but because I am a Cruiser and I will not go GunGun,. Price is satisfied with Large change, it is not a rotten one, so I would like to purchase Stock in the future.
I was worried about what to do when Oil Element's replacement time came down I was attracted only by the cheap price and decided to purchase! The performance was good against the price and I was able to do the installation to Smooth.
It was exchange of Oil and Element but it ended in less than 30 minutes!
It is not a product only cheap! It is worth buying.
Next Element will also purchase this item!